A simple binary watch face including battery status and activity bar at the top and date bars at the bottom. On supported devices seconds are also updated in low power mode with CIQ 2.3.1.</p><p></p><p>At the bottom you can find indicators for phone connection (left) and notifications (right). Alternatively these indicators can be located inside first hour colum via dots.</p><p>If either sleep mode or dnd is activated the watch paints an arc around the watch face to signalize the current state. Alternatively these indicators can be located inside first minute column as dots.</p>
1.13.3</p><p></p><p>- fixed an issue with calculating week of year when first day of week was configured to be monday</p><p></p><p>1.13.2</p><p></p><p>- fixed issue with updates for solar intensity</p><p></p><p>1.13.1</p><p></p><p>- added support for D2 Mach 1 and D2 Air X10</p><p>- optimized burn in protection to avoid screen being disabled because of too many active pixels.</p><p></p><p>1.13.0</p>
Aplikasi ini memerlukan akses ke:
Daniel
8 April 2023 |
Versi 1.13.3.0
Andrey
31 Januari 2023 |
Versi 1.13.3.0
Ian Marquez
4 September 2022 |
Versi 1.13.2.0
Is there any chance more options could be added to the activity bar? It would be brilliant if it could show the percentage for body battery and such!
Mike Woinoski
6 Jun 2022 |
Versi 1.13.2.0
The ultimate geek chic. It doesn't get cooler than this stealth face: no one can read it but you. Developer: 5 stars for the concept. Unfortunately it doesn't work on my Forerunner 45. It displays fine when I initially select it, but as soon as the backlight dims, the face goes blank; and it never reappears, even if I activate the light manually. But if you ever fix it for the 45, ping me and I'll buy you a coffee: burner at wxyz dot me
Balasan Pembangun
7 Jun 2022,
Talkabout
Thanks for the raing! I have tested Forerunner 45 in simulator and there it runs just fine. I have no physical device here so testing is difficult... If you send me some more information via "Contact Developer" on the right, I will try to find the problem and make it work.
Emmanuel Magaña
30 Disember 2020 |
Versi 1.12.2.0
I love the design, it's the best one of the Binary format, but on the Forerunner 630 the hours do not appear; only minutes and the seconds just for a couple of seconds, then they disappear. I'll try it again after some actualizations hoping you could get that fixed.
Rubén Omar Acuña Cárdenas
8 Disember 2020 |
Versi 1.12.1.14
It's nice to view this simple clock, I like so much. You can choose three types of clock's distribution: vertically, horizontally and in circles. My favourite one is horizontal clock, although it's has a issue in the bar of minute and seconds, sometimes appears a seventh square, which corresponds to 2^6 = 64. There isn't more than 60 seconds or minutes. The counting has various errors.
Michal Kubes
2 Mac 2020 |
Versi 1.11.2.0
Superb! Even though i had to go and chage wf on my fr935 to make the changes happen on the watch.
Nicholas
17 November 2019 |
Versi 1.11.2.0
꧁𒆜K⨳R⨳I⨳S⨳Z⨳T𒆜꧂
7 Mei 2019 |
Versi 1.10.0.0
Settings not refreshing, and when yes, it's faulty
Balasan Pembangun
7 Mei 2019,
Talkabout
Sad to hear that you are facing issues. A developer has no influence on the options handling inside a watch face. So if anything is not working there (like updating the values) this is nothing I can fix. Might be an issue on Garmin side. Maybe try a little bit later and the issue gets resolved automatically. Good luck!
Chad Wilson
5 Mei 2019 |
Versi 1.9.0.0
This is pretty awesome, never had a binary clock before so it's definitely a challenge! My only question is if I have the activity bar being the HR, how is that supposed to be read? A suggestion/wish too, maybe have the option be able to change the top 3 bars (battery right now) to the "move" bars? Anyway, great job!
Balasan Pembangun
5 Mei 2019,
Talkabout
Thank you for the review! The heart rate is a binary value and thus read from right to left (like all binary values). The battery bar cannot be replaced as the is not enough space to put "longer" bars. But you can define what bar should be shown below the battery bar. Hope that helps!
techyhob
22 Februari 2019 |
Versi 1.9.0.0
Zorkojlorko
27 November 2018 |
Versi 1.7.8.1
That works with my Fenix 3 however seconds are disappeared soon. Occasionally they are shown and then gone again. I would prefer to have them placed since that is a dynamic field looking well. Can I fix that by some way somehow?
zhezhan
19 September 2018 |
Versi 1.7.8.1
I love this watchface! is it possible, that the date (day of month) is wrong? Today is the 19th and it shows 18 in binary (10010).
Thomas Hess
16 September 2018 |
Versi 1.7.8.1
Der Hammer (wenn man‘s mal verstanden hat ;-) stylisch, klar, einfach, beeindruckt im Freundeskreis, macht Spaß und ist leicht zu konfigurieren
Aadu Polli
26 April 2018 |
Versi 1.7.7
I'm happy with Watch Face, specially it so simple. I have trouble to find out few things, like : 1. What green and orange dot mean? 2. how to read date? 3. Where is settings for watch face? I'm beginner as you understand already!
Balasan Pembangun
26 April 2018,
Talkabout
Thanks for your feedback! orange dot: not read notifications are available greed dots: battery level, not binary reading date: from right to left, binary settings you can find in Garmin Connect Mobile. Navigate to the device and select "Widget/App Settings". If you still have questions simply drop me a mail (right side "Contact Developer") Bye
Paul K
14 Januari 2018 |
Versi 1.7.5
A good binary clock which makes you think, read and interpret. Using a Garmin Forerunner 235 and unfortunately the battery level indicator does not show due to the face not being big enough. It is also difficult to read the activity monitor. Would love to see the battery indicator show on the face of the FR235
MrBuai
7 Januari 2018 |
Versi 1.7.5
it's very good watch face for me and I want you set up day , month from left to right. It's pactical than right to left.
Patrik Lindskog
2 Januari 2018 |
Versi 1.7.5
Fantastic. Beatiful and easy to use. Love the clean interface.
Matt Roth
28 November 2017 |
Versi 1.7.4-upd
Great watch face but the Day of Month and Month is read left to right instead of right to left the way binary is read
Balasan Pembangun
28 November 2017,
Talkabout
Yes, you are right, the direction is not natural for binary values. Honestly I have never put real attention to that :) I will think about changing it but I am afraid that people got used to the direction and will not like the new way. Thanks for your rating!