30 Mei 2020 | Versi 1.6.7
It's a very convenient easy to use widget, and it's too sad that I gotta take my watch off for several minutes to get correct temperature measurement, however, at least it shows real time temperature, not like within last 4 hours like original manufacture one.
29 Mei 2020 | Versi 1.6.7
You can't change it from American Fahrenheit to the Rest of the World Celsius. Consequently, of no real use. Uninstalled.
30 Mei 2020, Navicom
You can, indeed. Press START button few times or tap the screen if you have device wiht the sensor screen, until you see C. We are living in ROW and we use this app every day with Celsius. Thanks for your ratings.
Xavier Caballé 🎗️
09 Mei 2020 | Versi 1.6.7
It shows the internal temperature of the device, which means nothing... I don't see any reason to have this widget installed.
10 Mei 2020, Navicom
We are pleased to say it measures internal temperature of the device. Take device off your wrist and wait - you will get environmental temperature. It is not the medical device, so do not expect precise body temperature measurements. It works as designed. You have a tool and only from you depends how do you use it. If you don't need this, please do not use this widget. Other people use it and have reasons to do it. Thanks for review. Two sad cats are crying.
Natalia Carolina Suárez
26 April 2020 | Versi 1.6.7
Is not accurate is arroud 3 or 4 degrees under normal temperature I just checked and I'm 31.9 Celsius
26 April 2020, Navicom
Garmin is not a medical device. Internal sensor measures the temperature inside the case. Of course it not placed directly on your skin, so the external tempearture and internal tempearture balance is found. It is hardware design and not the software issue. Please refer to the Garmin with the ideas how to improve the sensor readings. garmin.com/ideas
Thanks for review. Stay healthy! Be happy!
Cristian Mezei Valentin
07 April 2020 | Versi 1.6.7
it's measures body temperature? or outside? thanks!
09 April 2020, Navicom
It reads the internal sensor data. Sensor is affected by the body heat. Take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. Your body heat affects internal sensor. It is by Garmin design, not the Connect IQ developers. Thanks for review!
19 Mac 2020 | Versi 1.6.7
On my VA4 work slowly. Please add set default unit in settings.
19 Mac 2020, Navicom
It depends on Garmin Developers and you should contact support to improve speed of the device. It is not our fault, widget did not change, and it worked fast. Since some updates it works not so fast. Please descript the second request regarding settings via Contact Developer form, include your email for the feedback.
15 Mac 2020 | Versi 1.6.7
Just works great on GPSMAP 66S + Tempe, thanks
16 Mac 2020, Navicom
Wow, Gpsmap 66, you found the widgets menu! Amazing! Thank you for your review!
FC. JAVIER DE LA FUENTE GONZALEZ
06 Mac 2020 | Versi 1.6.7
It gives temperatures of 33º when there are 15 in my Garmin Venu
09 Mac 2020, Navicom
Take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. Your body heat affects internal sensor. It is by Garmin design, not the Connect IQ developers. Thanks for review!
12 Februari 2020 | Versi 1.6.7
wird nicht auf dem GPSMAP angezeigt. Sollte eigentlich kompatibel sein.
14 Februari 2020, Navicom
Please update your device using Garmin Express garmin.com/express App requires the latest SW. Gpsmap 86 does not have internal sensor, only external Tempe sensor can be used.
25 Januari 2020 | Versi 1.6.6
Can’t report bug to contact developer section, keeps saying “error.” The issue I’m having is on my Garmin FR 920xt. Get error message “Not supported. Invalid sensor data”.
26 Januari 2020, Navicom
Sorry about that. Link https://apps.garmin.com/en-US/apps/7a18ba6f-15ea-443c-a5a1-d74266e63c5e/contactdeveloper should work when you signed in your Garmin Connect Account.
Unfortunately, FR920 does not have internal temperature sensor available to SDK, so for your device the Tempe sensor will work only. Pair it and launch widget.
11 Januari 2020 | Versi 1.6.6
Doesn't give accurate temperature for the edge explore. I waited a half hour for the sensor to reach local temperature and it was off at least 10 degrees.
12 Januari 2020, Navicom
Sorry about that. You should consult Garmin and ask their support stuff about this case. Connect IQ apps Developers just read what the Garmin firmware developers provide us.
29 Disember 2019 | Versi 1.6.6
Doesn't seem to support forerunner 245 - invalid sensor data...
30 Disember 2019, Navicom
You need to have tempe sensor paried with your device.
26 Disember 2019 | Versi 1.6.6
Ich habe die Vivoactive3, leider wird der interne Temperatursensor nach dem letzten Update nicht mehr gefunden, folgende Fehlermeldung wird angezeigt: „nicht unterstützt, keine Daten Sensor“ Schade!
26 Disember 2019, Navicom
Please send us more details about update and version on your device. We will create a ticket in Garmin system to investigate this issue.
11 Disember 2019 | Versi 1.6.6
funziona su Forerunner 245?
12 Disember 2019, Navicom
It should work.
14 November 2019 | Versi 1.6.6
It's showing what it should, but seems to drain battery dramatically. It dropped from just above 30% to 0% during the night (I have about 15% usage per whole day). Unistalled.
17 November 2019, Navicom
Please can you share some details via Contact Developer form with your email to feed back? App was tested on many devices and it does not cause battery drain. There are a lot of other apps, watchfaces, that are energy greedy.
06 Oktober 2019 | Versi 1.6.2
It is extremely bad app and I have to shutdown the watch to uninstall it
05 November 2019, Navicom
Please update to 1.6.6 version and higher.
01 September 2019 | Versi 1.2.4
Me sale el mensaje “not supported, invalid sensor data” y mi reloj es un Fexix 5, que puedo hacer??
02 September 2019, Navicom
Please contact us via Contact developer form on App Info page. Please specify your email to get a feedback.
Reijndert de haas
03 Ogos 2019 | Versi 1.2.3
Nice app. One error: it's just "Kelvin", not "degrees Kelvin".
05 Ogos 2019, Navicom
Hi there! Thank you for your feedback! 1.2.4 version includes such fix, please update.
Global Responce Solutions PMC
20 Julai 2019 | Versi 1.2.3
Works very well on Tactix Charlie I really like being able to choose colors for different environments good app I haven’t found anywhere it won’t link up from Africa the Middle East to US
22 Julai 2019, Navicom
04 Jun 2019 | Versi 1.2.3
Perfetto sul mio Vivoactive HR ! Ovvio per vedere la temperatura reale occorre toglierlo dal polso e lasciarlo lontano dalle fonti di calore (come tutti i termometri). Ottimo lavoro, grazie!
05 Jun 2019, Navicom
04 Jun 2019 | Versi 1.2.3
Is as accurate as any other app (I checked), very straightforward to use, and nice clear display with big digits and easy unit change.
Yes it won't be accurate when it's on your wrist, but that's not the fault of the app, your wrist is hotter than the air, and every other app would have the same problem.
Only gripe would be that it takes a second to start up each time, showing a splash screen. Built in Garmin widgets don't seem to do this, I don't know if this is a limitation of the watch OS.
04 Jun 2019, Navicom
Thank you! Any 3rd party widget on Connect IQ platform starts the same - with some (in)visible delay. You are correct, native Garmin widgets start very quickly as they run code natively.
17 Mei 2019 | Versi 1.2.3
It showing temperature but really out of reality. Outside is around 15 degrees while this app is showing 30 degrees Celcius. Vivoactive 3
20 Mei 2019, Navicom
Take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. Your body heat affect internal sensor. Do not expect the magic. User garmin.com/ideas to request new sensor embedded into the vivo- units so it will show you real temperature.
19 April 2019 | Versi 1.2.2
Loaded on my gpsmap66s, but doesn’t appear anywhere.
22 April 2019, Navicom
Press POWER button once to appear main widget pane. Press RIGHT or LEFT button to scroll between widgets. It is Garmin design, not our fault. Thank you for your review.
28 Mac 2019 | Versi 1.1.6
funciona muy bien en mi vivoactive HR
22 April 2019, Navicom
23 Mac 2019 | Versi 1.1.6
Хороший виджет! Может отображать температуру даже в Кельвинах! )) Быстро подключается к внешнему датчику Temp и можно видеть актуальную температуру окружающей среды. Не хватает индикатора подключения к датчику Temp,чтобы понимать откуда считывается температура! В общем ребята из Навиком молодцы - делают простые и полезные виджеты. Но функционал надо улучшать!
25 Mac 2019, Navicom