24 April 2022 | Versi February 4, 2020
When my headphones is connected to my 945 LTE the vibrations don't work. The rest of the run it performed perfectly. Maybe change the increments when changing power to 5 instead of 10 during the run.
22 Februari 2022 | Versi February 4, 2020
The app nicely limits the info so can focus on effort. Adjusting the target power on the go is useful. If you feel better/worse than expected, can adjust and then not annoyed by alerts. One big issue: power/pace data do not fit in boundaries. Hard to read.
13 April 2021 | Versi February 4, 2020
The app shows the current power, average power, HR and distance plus a black dot that moves across the screen as you run, it words well if that's all you want to see. There is no way I would use this to try and get a PR (as suggested) as no where does it show the time or a prediction of a finishing time. You can change the target power by using the up/down buttons (which is good) but you then have to press the start/stop button to get off the screen I thought this should be automatic.
23 Jun 2020 | Versi February 4, 2020
I used this app with around the bay and it performed amazing. Since I have used it for 5K and 10K trials and it keeps me focused on what’s important. And cuts out the rest.
25 Mei 2020 | Versi February 4, 2020
Could be amazing, however for me:
The fields are oversized, on the fenix 6s screen, meaning the you can't see some of the numbers.
The most annoying thing is the vibrate out of zone. It's distracting, and unable to be turned off. 1/2 way through a half marathon I realised that it was really annoying me and I couldn't stop it! Won't be using again until this is fixed.
Love the pod, the software need to catch up, please!
30 April 2020 | Versi February 4, 2020
Only request, smaller power range please?
28 Februari 2020 | Versi February 4, 2020
I know it's called Racing IQ, but I'd like to see the possibility to set interval ranges like Garmin has.
01 Disember 2019 | Versi October 21, 2019 - 1
I have both stryd zones and stryd power race app on my forerunner 235,stryd zones works great on my watch,but stryd power race is not usable.It will automatically turn down my watch after run a few(about 3~5km) km,and restart my watch,automatically swtich my stryd zones page.Cant find any solution about it.
07 September 2019 | Versi August 19, 2019
Recent updates (user selection of fields and power averaging) greatly appreciated. Could the app remember the last power target value used and distance i.e. have a 'quick start' mode as the default and the user has to press 'up' if they want to deviate from their default values - i.e. just want to rock up to my weekly Park Run 5K and press the start button and it retrieves my default values. i.e. keep it simple. Apart from that its a very useful app.
26 Mei 2019 | Versi May 2, 2019
Does what it should do. The only thing that is really nagging: if Stryd loses connection with the watch, there's no warning, just the last value is shown.
03 April 2019 | Versi March 8, 2019
I used STRYD PowerRace, in a 30k race for the first time. I did very well and the app worked well.
I think that the top main number should be user set to either instant,1,3,5,10 sec power. I personally use 3sec in normal training and it works awesome.
The top number is locked to instant power and I found it a little tricky to dial in the perfect pace at times. But average pace in the lower right corner helps keep you on track as well.
I have conflicting thoughts about a timer. On one hand I say it need one, if you are trying to clear a time goal, having a timer allows you try to clear a time goal, or that final push to clear whatever time goal you are going for.
On the other hand not having it lets the race go the way it is supposed to go & possibly keeps you from over reaching for a time goal.
Power race did work great, with the power alerts and minimilist design and data fields.
Would I use Stryd power race for my next race! YES! But I really want 3 second power option instead of instant power for the main number!!
Love my STRYD! STRYD support and community is amazing.
27 Mac 2019 | Versi March 8, 2019
Please add "remember last target power and distans" so we don't need to fibble too much before running. Thanks great app, keep powering
Bart de Kruiff
16 Mac 2019 | Versi March 8, 2019
Dear developer of the Stryd PowerRace,
I have a Garmin 920XT.
On the screen, I can see the actual power, the lap power and the average power.
And the number of km's.
How can I change the fields? For example, how could I get elapsed time on the screen?
I would welcome your answer!
25 Februari 2019 | Versi June 26, 2018
- Bigger font for distance
- Make it more useful in intervals. Or add power target/alarms to the Stryd Running app instead.
Regarding displaying current pace, I actually enjoy it being missing. That is the whole point: we run with target power and we get pace as an outcome. If I had pace displayed, I'd be tempted to "correct" it by burning excess energy on slight uphills or otherwise running slower where I could run at my target power. It messes up with the whole idea of sticking to constant power throughout the race. Lap alerts provide enough pace data, IMHO. Feeling fresh, think your last mile was a bit slow? Press Up and Enter.
23 Februari 2019 | Versi June 26, 2018
I like my Stryd footpod and I think Stryd are a great company, but these IQ apps are terrible. The PowerRace app in particular isn't up to the clean aesthetics of a Garmin UI, and part way through my run my power just flatlined for the rest of the workout! You definitely can't depend on it and I would be pretty bummed out if it screwed up a race I'd been training for. In future I'll just use the power data field along with Pace and Average Pace, as I've been doing up till now.
05 Februari 2019 | Versi June 26, 2018
In race i want to see power but not only...i want to see pace also..and distance of course....i don't care about heart rate when i race...so this app must be rebuilt the screen with bigger font and another display with watts, pace, distance.
I suppose the developer should "respect" garmins button function and should correct the up - down button, (when pressed there is no way to return to the main screen since the return button marks the lap..really strange button behavior)
03 September 2018 | Versi June 26, 2018
Good to have dedicated app for Stryd though it doesn't look as well on a square watchface. But on my VAHR, "enter" is mapped to touch screen. This is really a bad idea! Please use the hardware buttons. Also increasing/decreasing power is mapped to "scroll left/right" on touch screen. Would be nice to be fixed in the next release. The distance measure would be good to be in metrics unit and half steps.
27 April 2018 | Versi March 14, 2018
Other stride apps are working great but when I try to start this one it resets my watch. Unusable on fenix3.
02 Mac 2018 | Versi October 3, 2017-upd2
Great job! It works perfectly with my Fenix 5x. But would it be possible to add a bigger font for distance data or an additional field with distance? I can hardly see the distance while I run. Please!!
09 Oktober 2017 | Versi October 3, 2017
I miss fields of pace and elapsed time.
03 Oktober 2017 | Versi October 3, 2017
Looks nice. But you should add default targets like half-marathon / marathon. Also the touch display isn't a good idea. Looking forward to see a new version.
05 Ogos 2017 | Versi Launch-v3-upd
Hello, in Europe we use by default metric. On settings it will be useful to have lap (1k) and total distance in km, thanks! Continue the good work
04 Ogos 2017 | Versi Launch-v3-upd
Great app. But giving 1 star for the simple reason that it starts/stops by touching the screen (vivoactive HR) making it too easy to screw up your run. Would be perfect if it used the buttons to start/stop
05 Julai 2017 | Versi Launch-v3
The Idea is interesting, but the numbers (HR, AP and Power) are misplaced on Fenix 5S. They should be a few pixels down the screen.
13 Jun 2017 | Versi Launch-v3
Causes a reset on watch when I try to start the app. Garmin Fenix 3 HR with firmware 4.30. Firmware on stryd is 1.12.