The SkiTour App Professional shows you key parameters like top speed, altitude, distance, etc. with high sensitivity GPS. As special feature an automatic phase detection is implemented in order to provide you separate values when going up or when driving down the hill. Additionally an ANT+™ compatible sensor for heart rate and temperature monitoring is supported. It is designed as as watch app (and not a data field or widget).</p>
Allow user to define auto speed limit very idle mode is entered</p><p>Bugfix when switching from Garmin map to another page</p><p>Allow user to select which satellites to use (requires CIQ 3.2 or higher)</p><p>Several GUI and stability improvements</p><p>
이 앱은 다음에 대한 액세스 권한이 필요합니다.
Janusz Bala
2021년 1월 21일 (목) | 버전 3.2.1
Strava, TrainingPeaks even Garmin not recognize activity. So for mi its not useful
austrotom
2021년 1월 2일 (토) | 버전 3.2.0
Super Leiwande App. Wie alle anderen auch von diesem Entwickler. Danke!
Aarno Liebl
2021년 1월 1일 (금) | 버전 3.2.0
Guten morgen, liebes Team von RH-Sports. Ich habe die App gestern mit meiner Forerunner 645 Music benutzt und bin sehr überzeu davon. Dennoch habe ich ein paar Fragen: Wie kann ich eine manuelle Runde machen? Warum werden mir Daten wie Vertical Speed nach einer 15 minütigen Testtour angezeigt und nach einer 3 einhalb stündigen Tour nicht? Und wann kommt die Premium Version heraus? Liebe Grüsse
Ιννιγο Cloud 🇳🇵
2020년 12월 31일 (목) | 버전 3.2.0
It works really well and gives you a lot of information while skinning your way up.
Walter
2020년 12월 31일 (목) | 버전 3.2.0
Nutze die App wieder seit gestern. Bin damit eigentlich zufrieden, jedoch werden keine Aufstiegshöhenmeter mehr angezeigt, sondern nur noch Abstieg und hier meines Erachtens die doppelten Meter.
Dr. Marcus Burgau
2020년 12월 17일 (목) | 버전 3.1.1
Sehr schöne App, funktioniert tadellos, darauf habe ich gewartet!
Wasabi
2020년 9월 12일 (토) | 버전 3.0.5
Software very difficult to figure out, appears as installed on my phone and on the app, but does not work on the watch.
Patrik
2020년 4월 16일 (목) | 버전 2.8.0
Verwende die App gerne. Leider weden die Schritte während der Skitour nicht gezählt bzw. auf der Fenix 6 angezeigt.(Distanzen stimmen)
Trevor LeDain
2020년 4월 5일 (일) | 버전 2.8.0
This is a great app that works exactly as advertised. Thanks for supporting my “legacy” Fenix 3. I only wish I had more opportunities to use it.
Andreas
2020년 1월 21일 (화) | 버전 2.4.0
Garmin Connect Mobile stürzt ab beim Öffnen der aufgezeichneten Aktivität!;-(
개발자 회신
2020년 1월 21일 (화), RH-SPORTS
Why do you give one star for my app running on the watch if the Garmin mobile app running on the phone crashes??? The only relationship is the session data which is recorded during the runtime of my app. But also here Garmin fully controlls the format how the data is written to the FIT file which is then transferred to the watch by Garmin mechanisms. Most problably Garmin has a problem with parsing the FIT file where the SkiTour activity profile is used. This error lead to several 1 star reviews for my app. Please select the generic activity profile until Garmin fixes these problems and give the 1-star review to Garmin.
Ivo
2020년 1월 20일 (월) | 버전 2.4.0
Beim Öffnen einer aufgezeichneten Aktivität stürzt die mobile Version von Garmin Connect ab!
Nico G
2020년 1월 14일 (화) | 버전 2.3.2
Great app for ski touring. Sufficiently good aside from the few comments already mentioned with 0m up ascent with the latest update. Also, my previous GPS data is not showing anymore in the Garmin phone app. How to fix this? Delete activities in the app and re-sync from the watch? Will this work or will this also delete the activities from the watch? Many thanks to the developer.
Gatterer Michael
2020년 1월 11일 (토) | 버전 2.3.1
Aufstiegshöhe wird als Abstiegshöhe aufgezeichnet und wird mit Abstieg(Abfahrt) summiert und wird in Garmin Connect nur als Abstieg angezeigt! Auf Strava werden Höhenangaben korrekt angezeigt. Als Aktivität wird bei Strava wird nicht Skitour, sondern Skifahren angegeben (muss manuell bearbeitet werden).
개발자 회신
2020년 1월 11일 (토), RH-SPORTS
Sorry für die Probleme. Ich habe in der letzten Version auf den Aktivitätstyp SkiTour umgeschalten, da ich nach Tests auf mehreren verschiedenen Uhren über Weihnachten davon ausgegangen bin, dass Garmin die bereits vor einem Jahr gemeldeten Höhenprobleme in Garmin Connect gelöst hat. Das ist offensichtlich nicht der Fall. Ich habe gerade einen Hotfix bereitgestellt, wo man wieder das generische Aktivitätsprofil (ist auch default gewählt) auswählen kann. Bitte unbedingt das Profil verwenden, wenn ihr Probleme mit der Höhe habt.
Stefan Hoetzl
2020년 1월 11일 (토) | 버전 2.3.1
At the moment there are several bugs: - positive altitude is not set - negative altitude is completly wrong 900 instead of 500 in my case - map is not shown in connect for the logged activity If these things are fixed, I will give 5 stars again.
개발자 회신
2020년 1월 11일 (토), RH-SPORTS
I am very sorry for that. I fixed the activity type to ski-tour in my last release as tests over christmas on several devices have shown that the elevation problems, reported around one year ago, have been solved. This does not seem to be the case for all devices. Therefore I released a hotfix a few minutes ago where the user can choose the activity type again. Please use the generic profile (default setting) if you have problems with the elevation in Garmin Connect.
Lou67
2020년 1월 9일 (목) | 버전 2.3.1
Seit der letzten Version wird kein Höhenunterschied mehr angezeigt..
Fritz Trenker
2019년 12월 25일 (수) | 버전 2.3.0
Die App funktioniert an sich super, mir gefallen viele Informationen auf einen Blick bzw. einem Bildschirm. Wenn ich aber zusätzlich navigieren will bzw. eine auf Garmin connect heruntergeladene Route aktivieren will kommt die Fehlermeldung : "Invalid PAC Wrong Link to dynamic watch". Mit anderen Apps wie die vorinstallierte " Bergsteigen" funktioniert das einwandfrei? Gibt es da eine Lösung?
Emmett Bankston
2019년 12월 7일 (토) | 버전 2.2.1
This is a nice app, but I cannot trust the altitude readings. We toured a peak that starts at about 7800 and ends just under 10,000 but this says we topped out at 11,450 and started at just under 9000
Petra Grossmann
2019년 5월 14일 (화) | 버전 1.6.0
Gerhard Findenig
2019년 2월 18일 (월) | 버전 1.4.1
Höhenmeter werden zeitweise im Garmin Connect nicht angezeigt obwohl ein Höhenprofil aufgenommen wurde. Das Höhenprofil ist auf fehlerhaften Niveau, da der Beginn und das Ende teilweise von -200m bis +800m verschoben sind. z.B Sart bei 1700m anstelle 900m und Ende bei 2800m anstelle 2000m. Der Verlauf des Höhenprofils passt, jedoch wird auch die aktuell Seehöhe falsch angezeigt.
Jens
2019년 2월 16일 (토) | 버전 1.4.1
Die Höhenmeter werden auf mobile App Connect nicht dargestellt! Auf der Uhr erscheint der Aufstieg als Abstieg!
Gatterer Michael
2019년 2월 13일 (수) | 버전 1.4.1
Hallo, bei Skitour App wird die gewonnen Höhe fehlerhaft dargestellt. Die Anstiegshöhe wird als Abstieg dargestellt und es gibt keine Trennung zwischen Anstieg und Abstieg, die Höhen werden einfach summiert. Beim Hochladen auf Strava wird als Aktivität Skialpin und nicht Skitour angegeben!
Freck
2019년 2월 2일 (토) | 버전 1.4.1
개발자 회신
2019년 2월 3일 (일), RH-SPORTS
After some debugging I found out that a problem might occur if the app settings are wrong. For example if you add floating point numbers where integers are expected. This is a Garmin problem as they are fully responsible for installation, de-installation and app settings. As work-around, please connect your watch via USB and properly configure the app settings via Garmin Express software. Then it should work. I will open a bug ticket for Garmin to avoid this problem in future.
사용 가능한 통계가 없습니다.