POWER BIKE WIND is a Zones Based Data Field for climbing and time trial specialists, performance and racing, with Estimated Power Calculations with an 20 variable algorithm similar to strava using GPS, Cadence and Speed Sensor, Wind speed and Air Density, Rolling resistance and Air Drag Coefficients, When Power meter is not present, With 10% Margin Error tested with a Garmin Vector, compatible with Training Peaks and Golden Cheetah.</p>
1.0.0 Initial Release</p><p>1.2.0 Expert Configurations Settings Add</p><p>1.3.5 4 Display modes add</p><p>
이 앱은 다음에 대한 액세스 권한이 필요합니다.
Francisco Torres < Tarex >
2021년 3월 22일 (월) | 버전 3.5.1
I have problems with the data field, when I start the activity at the same time I get the Connect IQ logo and it does not show the data at the end of the activity
Carsten cmndrb
2021년 3월 12일 (금) | 버전 3.5.1
Top, App zeigt viele verschiedene Werte an. Mir fehlt lediglich eine genaue Dokumentation der verschiedenen Werte und Einstellungen, ist es möglich , die irgendwo zu downloaden?
Даниил
2021년 3월 3일 (수) | 버전 3.4.9
ManuS5
2021년 2월 19일 (금) | 버전 3.4.8
The app works very well, data are very accurate related a true PM.. If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation! for instance, instead of C Power A, just Power and Avg. Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen? I'm looking for a mode 2 without colors
ManuS5
2021년 1월 20일 (수) | 버전 3.3.1
The app works very well, data are very accurate related a true PM.. If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation! for instance, instead of C Power A, just Power and Avg. Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen?
Felipe Castañeda
2020년 8월 20일 (목) | 버전 2.6.9
Tengo una pregunta, en garmin conect después de terminar de entrenar cuando tomo vueltas con el garmin en una subida o algo me aparecen campos de potencia de power bike pro vacíos, ¿como puedo hacer para que salgan los datos de potencia de cada vuelta? de resto perfecta
개발자 회신
2020년 8월 20일 (목), xuxumatu
A ver si entiendo: terminas de entrenar y pones stop y salvas entrenamiento y luego reinicias un nuevo entrenamiento y sale vacío? manda un correo a [email protected]
François-Nicolas
2020년 8월 11일 (화) | 버전 2.5.8
I truly enjoy this datafield, was searching for such fantastic feature! However, I don't understand how I can select the particular computed value I want to display as datafield. How can I choose to only display "Average Power" ? To make it more refined, would you consider : 1 - Synchronise the changes / look & feel of all your "PowerBike" datafields? 2 - Make the parameter both definable via presets (such as VéloTopsEndurance) and manual value (using the links you provide, such as Air Drag Coefficient)? 3 - Add Michelin tyres rolling resistance? 4 - Use live ambient temperature from the integrated sensor (avoiding the hassle to manualy define it before each ride)? 5 - Take decimals in account for Bike weight? 6 - Take tires pressures in account?
bertazzon
2020년 8월 1일 (토) | 버전 2.5.5
Hi, why limit it to 20 kg. This prevent the use with the most of e-bikes. Hope you widen this range.
James Shanahan
2020년 7월 30일 (목) | 버전 2.5.2
This App worked great a few days ago. However went for a cycle today and the average watt over the cycle was "1"..? Can this be fixed please..? Once fixed I will update the review as I believe it works.
Markus W
2020년 7월 28일 (화) | 버전 2.5.1
Just installed and looks fine, but got the same problem as already noted by Marcus, 7.July 2020. The field for 'Rolling Resistance Coefficient' accepts no other value than 0. Garmin Express/Connect are actual and the problem occurs with PC based or mobile app. Other fields like 'Air Drag Coefficient' are ok. Maybe there is no upper range limit set for RRC or the field is handled as integer instead of floating point value!?
Paula Urzua
2020년 7월 20일 (월) | 버전 2.5.0
I have a problem with the data. It shows me always 0. I have modified the coefficients and nothing, the problem still goes. I have the FR245m with speed and cadence sensor Please help :(
개발자 회신
2020년 7월 22일 (수), xuxumatu
thanks for witting you need a cadence sensor for this to work if you have de sensor detected but it´s not working i gives you zeros, coefficients it´s garmin express problem, update to the latest versión. or ir you are using on a trainer mode better use power bike field 4, its algo free.
Antony VP
2020년 7월 19일 (일) | 버전 2.4.7
Bonne application. J'ai un capteur de cadence, mais pas de capteur de vitesse. Ça semble fonctionner. C'est assez complexe a paramétrer et je n'arrive pas a utiliser "." ou "," pour paramétrer le poids, le coefficient de résistance ou toutes autres données.
개발자 회신
2020년 7월 20일 (월), xuxumatu
Merci pour la revue, l'application peut être utilisée sans capteurs mais perd en précision, et pour saisir les données de coefficient en décimales, vous devez mettre à jour votre garmin express et / ou garmin connect à la dernière version, si vous avez un garmin qui le prend également en charge vous pouvez utiliser Power Bike Field ou Power Edge Field, plus faciles à configurer.
Aaron Herrera
2020년 7월 13일 (월) | 버전 2.3.7
I'm pretty much with a review down there. The values doesn't make sense to me when using it with a Fenix 6, cadence and speed sensor: Recorded values of AVG power and NP are 2 W and 10 W while Strava the average power is 174 W (Ride with 90 km in 3h, I guess you need to put some Watts for that). Recording is set to 1 s, GPS + Glonass and autostop. Any idea of what could be wrong?
Marcus
2020년 7월 7일 (화) | 버전 2.3.6
This is the best datafield. Exact what I originally expected from Garmin to provide as I learned that Strava has calculated power displayed. Instead of GPS using the Speedsensor additionally on my bike seems to fix issues with unrealistic peak values. I guess ascents are considered by gps signal, wind impacts cannot be considered because no data available at time of recording How does avg power and np power differ in calculation? One configuration issue I found. It is not possible to change rolling coefficient value in setting. As soon as I change the Warning pops up that value cannot be bigger 0 and not smaller 0. Even reentering initial value is not possible. Please fix this and the datafield is perfect for everyone who cannot or dont want to spend lots of money for powermeter
개발자 회신
2020년 7월 8일 (수), xuxumatu
Thanks for the review the algorithm considers air density depending of the altitude and temperature and yes it uses gps and I recommended to change GPS to Glonass or Galileo on 1 second recording for better precision, the decimal input format it’s a garmin express problem update to fix it, np calculations depend of at least 30 min ride above your ftp to be shown
Guy BELLOT
2020년 6월 20일 (토) | 버전 2.2.7
I used your Data Field Toaday for the first time. I need to analyze the figures but summary figures are quite strange. AVG Power: 21W (versus 210 by Strava) Max power: 1,957W (versus 1,081 by Strava) NP: 19W FTP Power: 210W AVG Power and NP are not relevant (do they include 0?). I know for sure that I am not able to push 2,000W.
개발자 회신
2020년 6월 20일 (토), xuxumatu
Power Bike Pro uses 20 variables algorithm and Strava has only 16, Strava for example calculates power when you are not pedaling, for better results we recommend you yo use cadence and speed sensor, GPS on 1 Sec, on galileo or glonass, calibrate the altimeter and enable auto pause thanks for the review
Juanjo Delgado
2020년 6월 19일 (금) | 버전 2.2.7
La aplicacion funciona aparentemente bastante bien, pero NO permite modificar el "coeficiente de resistencia a la rodadura", que por defecto indica 0,0045. Si se intenta modificar, indica que el Valor debe estar comprendido entre 0 y 0 (Pienso que se trata de un error que deberia solventarse). Dicho error, tambien provoca que el resto de valores (Como peso de la bici, temperatura, FTP, etc.) no puedan modificarse si dicho coeficiente no se deja a 0. En mi caso, lo quiero usar en Bicicleta de Montaña, y seria interesante poder modificar dicho parametro, y por supuesto tambien el resto de valores. Por lo demas, la aplicacion parece genial. El Dispositivo usado es un Edge 530.
iNDEX3
2020년 6월 15일 (월) | 버전 2.2.5
На станке Tacx flux smart 2 показания совпали с точностью несколько процентов.
Daniel Aparici
2020년 6월 8일 (월) | 버전 2.2.1
Funciona muy bien: sólo necesitas un sensor de cadencia de pedaleo, gps y barómetro en el reloj. Muy útil y perfecto funcionamiento.
Giacomo Maggioli
2020년 5월 24일 (일) | 버전 2.1.0
Hi, i really like the app. I was able to use it with my garmin 245 music to show the power coming from giant power meter pro. How can i see the normalized power after the race? I see avg power, ftp power, and ftp time. Also how is the ftp calculated? Thanks a lot for you help.
개발자 회신
2020년 5월 25일 (월), xuxumatu
Hi thanks for the review the ftp is the amount of watts and time you do on Z4 (.75% of your ftp) or higher the power you see on this app it´s not coming for the power meter, it´s estimated power based on algorithm, if you want to see the power of 245 you need this app. https://apps.garmin.com/us-EN/apps/70f1aea3-f1d3-47f6-b7aa-23f029a75e3b#0
Daniel
2020년 5월 20일 (수) | 버전 2.0.5
Did not work for my Edge 520 plus. It just showed the IQ logo the entire ride. I did not tried anything additional as I tested next to a similar datafield app that actually worked. This one is uninstalled from my device now.
Ralph
2020년 5월 2일 (토) | 버전 2.0.3
Really do like the data field and the displayed power values make a lot of sense ! Math behind this data field is impressive ! Thank you ! Areas for improvement: Unfortunately my summary fields are all 0 Watts in the final summary. I also would appreciate if the font of the data field is better adjusted to the available screen space ! Power is important so I would like to see cPower and aPower on a full screen data field on my Forerunner 945 --- instead I get small text with the values ... would appreciate if the data field adjusts the font sizing.
Ante Drnasin
2020년 4월 14일 (화) | 버전 2.0.3
I've left a review before so I'd like to submit another one because I had issues with this app. I've concluded that the issue was with the Garmin Connect IQ, after the latest update Connect IQ, Power bike pro stopped working and nothing could fix it. I tried many things, but the latest I did was to downgrade Connect IQ and the versions that work are 1.2.1, 1.2.2.., 2.0.0...Now Power bike pro works great again for me. The app is very accurate, compared it with Garmin Vector 3 and the data they gave was very similar. Thanks for this wonderful app.
Ante Drnasin
2020년 4월 9일 (목) | 버전 2.0.0
The data field was perfect, but since the last update to my Edge 530 the data field only show an IQ error.
Daniel Palomino Antequera
2020년 3월 27일 (금) | 버전 1.9.8
Es una buena app y muy interesante. La único es que me sales unos datos de varios muy altos. Como puedo configurarlo?
개발자 회신
2020년 3월 27일 (금), xuxumatu
el cálculo depende de tu peso y de tu estatura, verifica que eso este correctamente puesto en su configuración del garmin connect, y en los settings de la app puedes configurar el peso de la bicicleta los coeficientes de aerodinámica, si quieres batallar menos usa el power edge field o power bike field los settings son mas automáticos.
사용 가능한 통계가 없습니다.