2020년 5월 27일 (수) | 버전 0.22
I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.
2020년 5월 27일 (수), jim_m_58
You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?
2020년 5월 20일 (수) | 버전 0.22
Ok, very very Ok.
2020년 5월 15일 (금) | 버전 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
2020년 5월 11일 (월) | 버전 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
2020년 5월 12일 (화), jim_m_58
It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.
2020년 5월 2일 (토) | 버전 0.22
It doesnt work in Forerunner 235, i dont know why, please help me!!
2020년 5월 3일 (일), jim_m_58
The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.
2020년 4월 9일 (목) | 버전 0.22
No salecen grados centigrados
2020년 4월 9일 (목), jim_m_58
C or F is based on a standard setting on your watch.
Under Settings/System/Units, set Temperatature Units to C or F.
2020년 3월 31일 (화) | 버전 0.22
Installed on my Vivoactive HR and doesn't work.
2020년 3월 31일 (화), jim_m_58
Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.
2020년 1월 17일 (금) | 버전 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
2020년 1월 17일 (금), jim_m_58
The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.
2019년 12월 21일 (토) | 버전 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
2019년 12월 22일 (일), jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor.
As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
2019년 7월 31일 (수) | 버전 0.20.1
2019년 7월 17일 (수) | 버전 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) :
Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause.
Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
2019년 5월 9일 (목) | 버전 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe.
Работает отлично на garmin fenix 5X plus.
2019년 1월 2일 (수) | 버전 0.18
Great widget Jim! Keep up the good work
2018년 12월 12일 (수) | 버전 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
2018년 12월 13일 (목), jim_m_58
Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.
2018년 12월 4일 (화) | 버전 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
2018년 12월 4일 (화), jim_m_58
Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.
2018년 11월 28일 (수) | 버전 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
2018년 10월 30일 (화) | 버전 0.18
Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???
2018년 10월 31일 (수), jim_m_58
That's the version number of the app.
2018년 10월 25일 (목) | 버전 0.18
Excellent. Exactly what i was looking for. Totally 5 stars!
Enrique Del paso
2018년 6월 30일 (토) | 버전 0.17-upd3
On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...
2018년 6월 30일 (토), jim_m_58
The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.
2018년 6월 29일 (금) | 버전 0.17-upd3
Great and simple
2018년 6월 25일 (월) | 버전 0.17-upd3
Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.
2018년 5월 1일 (화) | 버전 0.17-upd1
Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max
2018년 3월 2일 (금) | 버전 0.17
2018년 2월 13일 (화) | 버전 0.17
Shows only Tempe temperature, Internal "Not Available", F3 HR.
2018년 2월 13일 (화), jim_m_58
In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)
2018년 2월 11일 (일) | 버전 0.16.1
In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app
2018년 2월 11일 (일), jim_m_58
The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.