The vPower data field app has been developed for those who are not fortunate enough to own an expensive power meter. Firstly, this is not 100% accurate. As you can imagine, there is a lot of variables at play to calculate power on the pedals accurately. This is my best attempt to take all these variables into consideration and developed the app with the following key features:</p><p></p><p>Version History</p>
Update for new Edge 830, 530, Forerunner 945 and MARQ.
このアプリは次の情報にアクセスする必要があります:
Henrik Kliebhan
2018/01/31 | バージョン1.80
A few weeks ago. VPower only collect peaks of data while cycling. I replace the sensor but nothing happend. All other sensor on different bikes show the same result. What has happend ??
the_hard_law
2018/01/21 | バージョン1.80
Is ok in the flat route. During the climb it don't work beacuse don't read the % of slope and set wrong power ( normally from 10 to 70 watt max) . To calcolate the power the reading of the slope is necessary. I hope to use it with the next upgrade .
Itay Rousso
2017/12/27 | バージョン1.80
Hi, I wonder if other have experienced it, but since the last update I am getting very low values - avg of 25W with a max of 65W... Before the last update it was all working properly - the only difference is that I changed the average value to 10 seconds, I changed it back to 3 in the middle of the ride but it had no effect... Before this update it was working really nice.. any idea? Itay
Iñigo
2017/12/09 | バージョン1.80
It doesn't work on my edge 1030. I obtain amazing high power values descending, while power is close to 0 climbing. It seems that calculation is not taking into account my weight and/or bike's, although they are correctly set in my profile (me) and in the data field configuration (bike)
ManuK
2017/11/28 | バージョン1.80
awesome, I use it since the day one, always improving.. the only problem, the beginning of the ride is very often a peak about 1000 watt or more, so the power graph on the website becomes less visible.. sometime I press the start button while moving on a flat road not pushing on pedals and it helps, but not always..
xuxumatu
2017/11/24 | バージョン1.80
Great update now it works and i think it´s very accurate a little bit overestimated on aceleration but when i see the fit in connect i see a peaks with 65500 watts i hope you can fix this thanks https://connect.garmin.com/modern/activity/2348323931
Hairil_Karim
2017/11/21 | バージョン1.80
tq for providing the update. now successfully installed at my edge 520. contacted garmin supported previously they said might due to mine is taiwan version...
Hairil_Karim
2017/11/17 | バージョン1.7.1-upd1
why it say apps not compatible when im trying to install at my edge 520 devices? pls help.
Paolo Porro
2017/11/04 | バージョン1.7.1-upd1
Fantastic app... Can you upgrade also for Garmin 1030... Thanks
GerryGranatowski
2017/08/10 | バージョン1.7.1-upd1
Been using the app for several weeks and recommend it for anyone who wishes they could afford a power meter. I would prefer to use the watt/kg option but found the display does not show a decimal value only whole numbers like 1.0, 2.0... I'd like to see values like 1.6, 1.7, 1.8....
Itay Rousso
2017/06/03 | バージョン1.7.1-upd1
Overall it seems to work quite nice. The values are also seem to make sense. There is one problem that I've noticed - often (I could not find any repeatable conditions when it occurs) the power will drop to zero and then after few seconds will climb back. This happens at a time when there is no change in the slope, my cadence and speed. These frequent drops, have dramatic effect on average value which appears to be too low (compared to the values I am getting during the ride). It feels as if there is a memory issue or calculation limit on the garmin device. I am using the edge 1000. Did anyone else noticed this behaviour?
Juanjo Mayo 🔻
2017/05/03 | バージョン1.7.1-upd1
Muy buena! Lo de la gráfica integrada en connect es un punto a favor pero creo que debería hacer una estimacion de 3 o 5 segundos porque al ser instantanea fluctua mucho y, aunque seguirá siendo estimada, será algo más fiable. Todas las salidas me ha marcado bien pero hoy me marcaba al revés, es decir, subiendo me daba 5 wattios y bajando se ponía a 200 o más, es como si los cálculos con la pendiente los hiciera al revés.
David
2017/04/11 | バージョン1.7.1-upd1
La aplicacion marca siempre la potencia instantánea y varía mucho. Deberíamos poder ponerla a 3 segundos o 5 segundos. Donde puede que la estimación sea más acertada sería en puertos. Pero aun así es un estimador. Seguiré utilizandola. En Garmin conect aparece una gráfica y la media y máxima potencia. Un saludo. Y espero que sigan desarrollandola.
LeoNasc
2017/04/02 | バージョン1.7.1-upd1
Great job! Only one thing: I don't know if it's possible to detect if GPS is off or if a trainer is connected and then turn on the trainer mode, and switch if off as you detect GPS is ON.
GeoGama
2017/03/17 | バージョン1.7.1-upd1
great app. would love to see option to set average 3s/5s/10s/30s
Abel Evelio
2017/02/16 | バージョン1.7.1-upd1
This is great and I think it is accurate. I really like to see the graph in Garmin Connect, but should show the average and maximum power in numbers. But it's great, Congratulations and very good work. En Español, -Está genial y creo que es certera. Me gusta mucho poder ver la grafica en Garmin Connect, pero debería mostrar la media y maxima de potencia en numeros. Pero está genial, Felicidades y muy buen trabajo.
Christoph Becker
2017/01/25 | バージョン1.7.1-upd1
Great app. I'm using it for dedicated intervals on a trainer. Since I use a Cycleops Super Magneto Pro, I would love to see its power curves added to the app for the fifths star.
Joey Campbell
2017/01/14 | バージョン1.7.1-upd1
I've been using it for a week and think it's great. I don't know how accurate it is, but I like to see the trends of the numbers and"chase" down certain wattage during the high intensity parts of my ride. Thanks for developing the app!
Lafayette33🇫🇷
2016/12/31 | バージョン1.7.1-upd1
Fonctionne bien Une légère latence à l'affichage mais cela reste une estimation de la puissance
cjmadew
2016/12/18 | バージョン1.7.1-upd1
Only just installed but looks great so far. Any chance of adding a power curve for a magnetic trainer?
Joao Almeida
2016/11/07 | バージョン1.7.1-upd1
Great app. A suggestion: should be optional in app config the time average of result display. in fit file real values, but in data field, 2, 3, 5, 10 sec average. A second option could be named fine tuning and user select the increment of the result, from -50% to +50%. To obtain the same values that strava calculation I reduce de weight of bike, in this moment I indicate 2kg and must be less. Vpower is still 10% higher that strava.
まだ利用可能な統計はありません。