Easily turn off and on your ANT+ tail light while riding.</p><p></p><p>With the Edge devices the tail light is always on or controlled automatically, but sometimes it would be handy to be able to turn it off manually (for example when we have riders behind us or to save battery when biking off road) and then back on when it is necessary (when back on the asphalt for example).</p><p>Even with the Varia RTL Radar Tail Light sometimes it is desirable to turn the rear light off, leaving the radar fully operational.</p>
Version 1.6</p><p>- Added support for Edge 1030 Plus</p><p>Version 1.5</p><p>- Added support for Edge 830, EdgeExplore and Edge 1030 Bontrager</p><p>Version 1.4</p><p>- Ever lost your rear light? The field now stores the status of the light in the activity .fit file and it's viewable on Garmin Connect. Three values are stored: 2 (light is on), 1 (light is off) and 0 (light is not present). In case you discover your light is lost, review the ride on Garmin Connect to determine the exact position it has been lost (consider the light will be 20/30 meters far from the point it has been registered as missing).</p>
このアプリは次の情報にアクセスする必要があります:
그냥38
2020/08/24
The Tail light field is good for Garmin Edge 830 and RTL510. However when the tail light field is touched for on, light and filed is gone to off mode after 2 second on.
Neal Uhlich
2020/08/10
This data field appears to not work with firmware version 9.50 on a Edge 1030. Installs as a data field and acknowledges the light network but pressing the field causes the Varia to flash twice and that's it. It does show the battery status.
Steffen Bornemann
2020/08/05
Great help for my varia 510! Would it be possible to add the current mode in the data field? like „Blink“ or „on 40%“?
Ruud Woudstra
2020/07/09
Hi, I installed this app on my Edge 1030Plus, but I cannot find the app in my Edge. So I still cannot swith the lamp off and leave the Radar on. Can some help me to get it working on my Edge?? Thanks. Regards, Ruud.
schorscg
2020/07/06
Very helpful. I only use my RTL510 with the flashing function. And with this data field (Tail Light Field) I can switch off the blinking very simply whenever when it's not needed. E.g. on separate bike paths. Approaching vehicles are still displayed on the Edge 1030 Plus Diplay even without blinking.
まだ利用可能な統計はありません。