2021/04/07 | バージョンv1.8
Works great, makes it easy to see what zone you’re running in
2021/03/21 | バージョンv1.8
Works as it should, provides good and relevant power data from the stryd pod which is definitely a great piece of hardware ! Only issue on my side, power zone is always displayed when used on a split screen, even though box is unchecked in settings.
Idea for improvement : add on/off toggle for data type storage on activity fit file (for those who do not care that much about leg spring stiffness, etc...)
2021/03/15 | バージョンv1.8
Ok to sync Stryd with my fenix 3 but that's all. It is a pity to use 1 connect iq on 2 just for that.
Display is really limited. I would prefer you forget the coloured scale (not useful like this) and display :
- averaged power
- power zone with 1 digit after the decimal point.
2021/02/11 | バージョンV1.5
Hi. Can’t sync my stryd power zones with my Garmin tactic solar. Help
2020/12/31 | バージョンV1.5
Works until it doesn't. Repeatedly crashes my garmin 935 randomly, requiring a hard reset.
Please contact me directly at [email protected] so that we can work on resolving this issue as quickly as possible. I apologize for this inconvenience.
2020/12/14 | バージョンV1.5
why not put an alarm for the power zones, we have to look at the watch every time.
thank you for your application
2020/11/04 | バージョンV1.5
As a basic datafield, it is OK, therefore 3 stars without any doubt.
At the same time Stryd as an excellent hardware would deserve more advanced datafield.
Although some people must be happy with the “visual zone bar” as an advanced feature, I feel a real pain in my back :-) that Stryd Zones cannot offer any other optional layout.
I mean there are multi-data datafields similar to Stryd Zones which offfer solutions to use them eg. as a half (upper or bottom) datafield of a “2 fields” layout of Garmin watches, but at the same time not one, but 2 or more data of the multi-data datafield are visible.
So imagine I would like to see eg. current power, avg power, HR and avg HR on the same screen. Stryd Zones should be able to show current power and avg power next to each other as a half screen datafield in the upper half of my watch, so in the bottom half I can use HR and avg HR in a “3 fields” layout.
I know there is Stryd Workout app, but it does not allow me
a) to choose avg HR or other precious Garmin datafield like aerobic training effect
b) to have more than 2 screens,
c) or to use any CIQ datafield like 80/20 Run Zones.
Thanks for listening to the users’ voice.
2020/10/27 | バージョンV1.5
It really works.
2020/10/20 | バージョンV1.5
Works really fine
2020/10/15 | バージョンV1.5
Would be profoundly useful to add power zone alerts (which is crude but works) the same way the 80/20 datafield does for pace/HR. A vibration every time a transition between zones occurs, how hard can it be? It’s frustrating enough to keep looking at your watch during the entire course of the run, which also takes away the joy/focus.
Run Power can do it, why can’t Stryd? Thanks.
2020/10/12 | バージョンV1.5
Can you please add a setting to disable vibration alert when stryd disconnects? Thanks.
2020/09/14 | バージョンv1.4
Stryd is great and this datafield has always worked reliably for me (Fenix 3 and now Fenix 6X). However, I don't look at it at all - I only use it to write Stryd metrics to the FIT file. I use a different datafield to display power.
In fullscreen mode, I would like this DF to display at least 3 metrics - instant power, lap power and lap time or distance. There's plenty of real estate on my Fenix display for that but this DF only shows 2 metrics.
2020/09/04 | バージョンv1.4
Lap power it's the same as the overall power. The connection between styrd and the watch sometimes transmit erroneous data.
Lap power will reset when the lap button is manually pressed or auto lap has been triggered. If you are executing a structured workout with a watch pre CIQ 3.0 you will have to manually press the lap button to get lap power to reset. This is due to garmin limitations. As for the erroneous data, please send a fit file, or the date of the run to me at [email protected] so I can investigate. I always urge people to do that first so we can figure out these types of issues. Thanks
2020/09/04 | バージョンv1.4
Over the last couple of months the connection between my Fenix 5 and Stryd has just randomly failed. Used to be a perfect connection but not any longer. Using by and any connection options (non wind stryd)
Can you please send a fit file of where you experienced these issuees to [email protected] , I always urge stryders to contact me directly first, as I cannot properly debug over this medium.
2020/09/03 | バージョンv1.4
I am prompted to install it again and again each time I try to access the data fields from Garmin Connect. I have set it up as instructed for Fenix 6 Pro.
"I am prompted to install it again and again each time" This is not something that we are in control of, this would be a Garmin issue. I urge all users who are experiencing issues to please reach out to me directly using the email in the `App Info` Description ([email protected]) before leaving a bad review. That way we can work together and find the issue, and in this case I could formulate a case and send it to Garmin. Please email me with pictures/ screenshots of the issue so we can get the ball rolling on solving this.
2020/08/29 | バージョンv1.4
Unreliable contrary to previous stryd power. Quite frustrating as the errors thst happen after a few seconds/minutes into the run render the whole activity data unusable by other systems.like trainingpeeaks that consider you did not move after the stryd error pops up (it bases stress score of activity on power data as such were given for few seconds and then no data means 0 power)
Seb I would you please contact me at [email protected] so we can figure out what is causing this error for you. I need to know your stryd username and what watch you are using. I have had not any other reports of this issue for this version, so I would like to find the bug you are experiencing! Looking forward to your email, we take these kinds of issues very seriously. Thanks for reporting it.
2020/08/27 | バージョンv1.4
Does what it needs to do. Would be nice if zone in a small field was like garmins HR gauge.
2020/08/26 | バージョンv1.4
The field works well and is reliable. The tiny zone number is not very readable in a field. Could you please add a linear or radial analog gauge? Like f6 radial HR gauge or HR Zones Chart CIQ field.
2020/08/18 | バージョンV1.3_
Ma fenix 6 pro n’affiche pas la Power zone, mais seulement la puissance ,
2020/08/06 | バージョンV1.3_
NO Zones on Fenix 6 Pro Solar
2020/07/26 | バージョンV1.2_
Good app but Can’t get the different colour zones to appear ?
2020/07/10 | バージョンV1.2_
Cannot get the data field onto my Garmin 6s
Deb I have my email above in the 'App Info' section for these support type issues. [email protected] , I can help walk you through installing the app.
Jose A. García Jiménez
2020/07/08 | バージョンV1.2_
El Stryd no para de desconectarse todo el tiempo.
Actualice a la última versión de este campo de datos para resolver este problema.
2020/07/08 | バージョンV1.3
Stryd have mostly done an admiral job at a job that they should not have to do at this point (running power is natively supported in every other major running watch brand at this point). It is stable and does what it says it will.
That said, the format of the field really leaves something to be desired. The "zones slider" on the left hand side just doesn't work as well as the standard zone gauge used by every other zones based field (Garmin native or CIQ). The graph/slider is difficult to see, which is presumably why they also used part of the field to print the zone number (you don't need to do that with the normal zone gauge). The other problem is that the zone slider only shows up if the Stryd Zones field is the only field shown on the watch. I have a heart rate zone field that shows me both my heart rate and the zone and it shares the screen with 5 other data fields...and it's actually easier to see at a glance.
If the zones were easier to see they could also replace the zone number on the full screen field with % of Critical Power, which is how most of the Stryd power based training plans indicate training intensity.
So, the general summary is that this data field does what it needs to well from a functional standpoint, but could really use a better display setup.
Jonathan, can you send me photos of the other zone data field you are referring to that has a visual indicator on smaller screens. I would love to investigate this potential feature improvement.
2020/06/23 | バージョンV1.2
The Stryd zones data field is great for always running with your auto cp zones. The ability to have a primary and secondary power metric is sweet!