App Icon

Temps

説明

A simple widget to display the newest reading from the internal temperature sensor, as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>

新着情報

0.16.1 - 645/645M support</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

詳細情報

権限

このアプリは次の情報にアクセスする必要があります：

  • センサーデータ（ANT+、心拍数、コンパスなど）
  • 心拍数、気圧、温度、および高度の履歴
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • Oregon® 7 Series Oregon® 7 Series
  • Rino® 7 Series Rino® 7 Series
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
平均評価： （35評価）
レビューを書く

Murray Keogh
2019/01/02 | バージョン0.18

Great widget Jim! Keep up the good work

Dušan Jurkovič
2018/12/12 | バージョン0.18

Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?

開発者の返信
2018/12/13, jim_m_58

Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.

Christopher Lawley
2018/12/04 | バージョン0.18

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended

開発者の返信
2018/12/04, jim_m_58

Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.

Emanuel Chiculita
2018/11/28 | バージョン0.18

Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!

barry
2018/10/30 | バージョン0.18

Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???

開発者の返信
2018/10/31, jim_m_58

That's the version number of the app.

Alan Formstone
2018/10/25 | バージョン0.18

Excellent. Exactly what i was looking for. Totally 5 stars!

Enrique Del paso
2018/06/30 | バージョン0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

開発者の返信
2018/06/30, jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
2018/06/29 | バージョン0.17-upd3

Great and simple

jsanchezi
2018/06/25 | バージョン0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
2018/05/01 | バージョン0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Simon
2018/03/02 | バージョン0.17

Top

Jája 🇨🇿
2018/02/13 | バージョン0.17

Shows only Tempe temperature, Internal "Not Available", F3 HR.

開発者の返信
2018/02/13, jim_m_58

In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)

Natxo Baile
2018/02/11 | バージョン0.16.1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

開発者の返信
2018/02/11, jim_m_58

The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.

DzoLoMartelet
2018/02/02 | バージョン0.16.1

Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.

Christian
2018/01/28 | バージョン0.16.1

Works beautifully on the Fenix 5X.

Nicole van den Heuvel-Voskuil
2018/01/24 | バージョン0.16.1

I have a vivo active 3 and the tempe sensore bt it won't show the temperate of the tempe sensor. Every thing is connected but it won't show :-( what i am doing wrong?

開発者の返信
2018/01/24, jim_m_58

Widgets time out very quickly on the va3, and the Tempe can take a minute to connect. Try again, but tap the screen every 15 seconds or so, as that resets the widget timeout.

andrej-svk
2018/01/12 | バージョン0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
2018/01/12 | バージョン0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
2018/01/12 | バージョン0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

Labrie JS 🇨🇦
2018/01/02 | バージョン0.15-upd

Great app, since you can't make the tempe graph, can you show the Alt tempe reading in the last 2-3 hrs. Any thing to have spme king of history. If not can you show the max and low internal and external temperature for the last 24 hrs.

Bernardo1985
2017/11/06 | バージョン0.15-upd

Muy buena aplicación. Funciona bien sobre el Garmin Fenix 5X. Como punto a mejorar, realizar una representación del gráfico más visual y legible. Recomiendo

Mark Elbogen
2017/10/08 | バージョン0.15

Great app. One question: is there a way to have a second graph which shows the graph of Tempe temperature as opposed to internal?

開発者の返信
2017/10/09, jim_m_58

Since the widget only runs for a short time, it really can't collect the info to draw a graph for the Tempe. The internal data is collect by the Fimware, so that's easy to display.

JoseNG2
2017/10/01 | バージョン0.15

Very good widget. Could you create one like this but only with pressure?

Andrew Cotter
2017/09/28 | バージョン0.15

Installed it on my Fenix 3 and internal temp showing not available. Any suggestions?

開発者の返信
2017/09/28, jim_m_58

See the first few lines in the app description: "NOTE: On watches that have Connect IQ 1.x (like the fenix3), the internal temperature will not be available"

Nathan Kofahl
2017/09/27 | バージョン0.15

Well done. This solves the problem of having a Tempe paired but not connected which makes the standard temperature widget useless.

まだ利用可能な統計はありません。