Stryd Zones | Data Field

Mihai Stanciu
27 אוגוסט 2020 | גרסה v1.4

Does what it needs to do. Would be nice if zone in a small field was like garmins HR gauge.

Brian Reiter
26 אוגוסט 2020 | גרסה v1.4

The field works well and is reliable. The tiny zone number is not very readable in a field. Could you please add a linear or radial analog gauge? Like f6 radial HR gauge or HR Zones Chart CIQ field.

michelrebetez
18 אוגוסט 2020 | גרסה V1.3_

Ma fenix 6 pro n’affiche pas la Power zone, mais seulement la puissance ,

Laufsau77
6 אוגוסט 2020 | גרסה V1.3_

NO Zones on Fenix 6 Pro Solar

George Hellyer
26 יולי 2020 | גרסה V1.2_

Good app but Can’t get the different colour zones to appear ?

Deb Lucas
10 יולי 2020 | גרסה V1.2_

Cannot get the data field onto my Garmin 6s

Jose A. García Jiménez
8 יולי 2020 | גרסה V1.2_

El Stryd no para de desconectarse todo el tiempo.

Jonathan
8 יולי 2020 | גרסה V1.3

Stryd have mostly done an admiral job at a job that they should not have to do at this point (running power is natively supported in every other major running watch brand at this point). It is stable and does what it says it will. That said, the format of the field really leaves something to be desired. The "zones slider" on the left hand side just doesn't work as well as the standard zone gauge used by every other zones based field (Garmin native or CIQ). The graph/slider is difficult to see, which is presumably why they also used part of the field to print the zone number (you don't need to do that with the normal zone gauge). The other problem is that the zone slider only shows up if the Stryd Zones field is the only field shown on the watch. I have a heart rate zone field that shows me both my heart rate and the zone and it shares the screen with 5 other data fields...and it's actually easier to see at a glance. If the zones were easier to see they could also replace the zone number on the full screen field with % of Critical Power, which is how most of the Stryd power based training plans indicate training intensity. So, the general summary is that this data field does what it needs to well from a functional standpoint, but could really use a better display setup.

Nick
23 יוני 2020 | גרסה V1.2

The Stryd zones data field is great for always running with your auto cp zones. The ability to have a primary and secondary power metric is sweet!

Jamie Stuart
19 יוני 2020 | גרסה Feb 19, 2020 - 2

For short runs it’s great and the graphs are very informative. However earlier this year I ran an Ultramarathon, and despite switching bluetooth off and removing the sensor from my Fenix 5, the watch still tried searching for the power meter and it drained the battery within 3/4 of the race.

Stuart
11 יוני 2020 | גרסה Feb 19, 2020 - 2

Good, but would be great if you could include other fields (heart rate, distance, time etc) so that the zones graph at the left side could still be viewed on the same screen as power & distance (or other standard field). The other option is to use multiple fields on the watch itself, but the power zone graph on the left hand side only appears to be there when one a single field (i.e. the Stryd field) is used

Gene
16 מאי 2020 | גרסה Feb 19, 2020 - 2

Other than numerical zone switch not working on a small version of the power field (zone number still stays on the top, it's a shame, if you can't disable it at least move it to the side and make power numer bigger, it's hard to read on the run) and it having wrong description (select to display your real time zone?!) everything works as it should. I'll give it a solid 5 and hope above-mentioned will get swiftly fixed ;)

olimpodelsol
10 מאי 2020 | גרסה Feb 19, 2020 - 2

Por favor ponerlo también en español, no se ingles y me pierdo con la información q me dan. Muchas gracias

Craig
19 אפריל 2020 | גרסה Feb 19, 2020 - 2

Usually logs the data (As long as the field is enabled on one of the screens on the watch and you dont forget about charging it). However the screens don't display on a Venu watch. You get a tiny indication of the power meter on the left of the display and nothing else. This is setup as per the documentation with a single field layout and stryd configured for the field.

Paul Vinh
5 אפריל 2020 | גרסה Feb 19, 2020 - 2

Was working great until 2 updates ago. Now when I try to use this version, after running for 3 minutes the data field would show and an error and stop collecting stryd data into my watch

bowlsie
22 מרץ 2020 | גרסה Feb 19, 2020 - 2

fenix 6x pro using zones. tried the new beta version of stryd but no luck with that :-) zones works perfectly as is. set up easy. thx

Diki
21 פברואר 2020 | גרסה Feb 19, 2020 - 2

Pleas add the option for 1 and 2 minute average power for the secondary display.

Aleksander Helgaker
17 פברואר 2020 | גרסה February 4, 2020

Looks nothing like the pictures. I have this on a page as the only data field. Despite this, my power zone is written in text so small it's impossible to read while running.

Daniel Svozil
12 פברואר 2020 | גרסה February 4, 2020

Same watches and same problem as James_Kelley, i. e. no color and zones for FR935. The proposed solution didn't work (Android).

Tobias Lind
8 פברואר 2020 | גרסה February 4, 2020

Great with Garmin Fenix 6s pro! Just ran my 4:th run today (got my CP auto-calculated after my 3:rd). Only issue is that the zone-number is very small on the 5-6 data field screens.

James_Kelley
2 פברואר 2020 | גרסה January 10, 2020

GARMIN 935. No display colors...Only black and white. Does not display zones (always blank), even though I have Visual Zone Bar and Numerical Zone enabled on Connect IQ mobile app. Disappointing...

Artjom Skljarov
30 ינואר 2020 | גרסה January 10, 2020

How to turn off vibrating when stryd is detached? Stryd loses connection quite often and constant buzzing drives me nuts

Patrick Hammer
29 ינואר 2020 | גרסה January 10, 2020

Nutze die Forerunner 735xt. Während dem Laufen zeigt die App mir korrekte Watt Werte an. Jedoch synchronisiert die Uhr mein Lauf nicht. Und es scheint so als würde die Lauf-Datei beschädigt zu sein. Ich kann mir die Details der letzten Aktivität nicht ansehen.

Dani
12 ינואר 2020 | גרסה January 10, 2020

When i want use power zone in run doesn't want to work It's been searching for all the time but It shows nothing can you fix that please?

Diki
1 ינואר 2020 | גרסה December 31, 2019

After the last update, the power of each lap on Garmin Connect show zero :(. The white line that use to show what zone that I am at is confusing because the space between each zone also white. I hope the line is black.