Jose A. García Jiménez
8 יולי 2020 | גרסה V1.2_
El Stryd no para de desconectarse todo el tiempo.
8 יולי 2020, StrydTeam
Actualice a la última versión de este campo de datos para resolver este problema.
8 יולי 2020 | גרסה V1.3
Stryd have mostly done an admiral job at a job that they should not have to do at this point (running power is natively supported in every other major running watch brand at this point). It is stable and does what it says it will.
That said, the format of the field really leaves something to be desired. The "zones slider" on the left hand side just doesn't work as well as the standard zone gauge used by every other zones based field (Garmin native or CIQ). The graph/slider is difficult to see, which is presumably why they also used part of the field to print the zone number (you don't need to do that with the normal zone gauge). The other problem is that the zone slider only shows up if the Stryd Zones field is the only field shown on the watch. I have a heart rate zone field that shows me both my heart rate and the zone and it shares the screen with 5 other data fields...and it's actually easier to see at a glance.
If the zones were easier to see they could also replace the zone number on the full screen field with % of Critical Power, which is how most of the Stryd power based training plans indicate training intensity.
So, the general summary is that this data field does what it needs to well from a functional standpoint, but could really use a better display setup.
23 יוני 2020 | גרסה V1.2
The Stryd zones data field is great for always running with your auto cp zones. The ability to have a primary and secondary power metric is sweet!
19 יוני 2020 | גרסה Feb 19, 2020 - 2
For short runs it’s great and the graphs are very informative. However earlier this year I ran an Ultramarathon, and despite switching bluetooth off and removing the sensor from my Fenix 5, the watch still tried searching for the power meter and it drained the battery within 3/4 of the race.
11 יוני 2020 | גרסה Feb 19, 2020 - 2
Good, but would be great if you could include other fields (heart rate, distance, time etc) so that the zones graph at the left side could still be viewed on the same screen as power & distance (or other standard field). The other option is to use multiple fields on the watch itself, but the power zone graph on the left hand side only appears to be there when one a single field (i.e. the Stryd field) is used
16 מאי 2020 | גרסה Feb 19, 2020 - 2
Other than numerical zone switch not working on a small version of the power field (zone number still stays on the top, it's a shame, if you can't disable it at least move it to the side and make power numer bigger, it's hard to read on the run) and it having wrong description (select to display your real time zone?!) everything works as it should.
I'll give it a solid 5 and hope above-mentioned will get swiftly fixed ;)
10 מאי 2020 | גרסה Feb 19, 2020 - 2
Por favor ponerlo también en español, no se ingles y me pierdo con la información q me dan. Muchas gracias
19 אפריל 2020 | גרסה Feb 19, 2020 - 2
Usually logs the data (As long as the field is enabled on one of the screens on the watch and you dont forget about charging it).
However the screens don't display on a Venu watch. You get a tiny indication of the power meter on the left of the display and nothing else. This is setup as per the documentation with a single field layout and stryd configured for the field.
5 אפריל 2020 | גרסה Feb 19, 2020 - 2
Was working great until 2 updates ago. Now when I try to use this version, after running for 3 minutes the data field would show and an error and stop collecting stryd data into my watch
22 מרץ 2020 | גרסה Feb 19, 2020 - 2
fenix 6x pro
using zones. tried the new beta version of stryd but no luck with that :-)
zones works perfectly as is. set up easy.
21 פברואר 2020 | גרסה Feb 19, 2020 - 2
Pleas add the option for 1 and 2 minute average power for the secondary display.
17 פברואר 2020 | גרסה February 4, 2020
Looks nothing like the pictures. I have this on a page as the only data field. Despite this, my power zone is written in text so small it's impossible to read while running.
12 פברואר 2020 | גרסה February 4, 2020
Same watches and same problem as James_Kelley, i. e. no color and zones for FR935. The proposed solution didn't work (Android).
8 פברואר 2020 | גרסה February 4, 2020
Great with Garmin Fenix 6s pro! Just ran my 4:th run today (got my CP auto-calculated after my 3:rd). Only issue is that the zone-number is very small on the 5-6 data field screens.
2 פברואר 2020 | גרסה January 10, 2020
GARMIN 935. No display colors...Only black and white. Does not display zones (always blank), even though I have Visual Zone Bar and Numerical Zone enabled on Connect IQ mobile app. Disappointing...
3 פברואר 2020, StrydTeam
This issue is caused by not getting your data successfully pulled in from the server. What I recommend doing is opening up Garmin Connect Mobile, ensuring that your what is connected and leaving the app open for roughly 5 minutes. Or if you have an IOS device, while connected toggle Bluetooth off and on and this should fix the issue (this is a bug in the mobile ios device). If you have any issue feel free to contact me at [email protected] and I can help you find a solution.
30 ינואר 2020 | גרסה January 10, 2020
How to turn off vibrating when stryd is detached? Stryd loses connection quite often and constant buzzing drives me nuts
29 ינואר 2020 | גרסה January 10, 2020
Nutze die Forerunner 735xt. Während dem Laufen zeigt die App mir korrekte Watt Werte an. Jedoch synchronisiert die Uhr mein Lauf nicht. Und es scheint so als würde die Lauf-Datei beschädigt zu sein. Ich kann mir die Details der letzten Aktivität nicht ansehen.
12 ינואר 2020 | גרסה January 10, 2020
When i want use power zone in run doesn't want to work It's been searching for all the time but It shows nothing can you fix that please?
12 ינואר 2020, StrydTeam
I would love to help you try to resolve this issue, you can email me at [email protected] and we can diagnose the issue. Do you have any other data fields presents at the same time as stryd-zones?
1 ינואר 2020 | גרסה December 31, 2019
After the last update, the power of each lap on Garmin Connect show zero :(.
The white line that use to show what zone that I am at is confusing because the space between each zone also white. I hope the line is black.
2 ינואר 2020, StrydTeam
Thank for quickly reporting this, we got the fix up as soon as we could! make sure to update to the latest version!
29 דצמבר 2019 | גרסה November 25, 2019
Just got Stryd and followed the instructions, so far the details are helpful. With 2 runs in looking forward to seeing more. However, I am puzzled as I do not see a field to enter my username in the app. I just see the ANT field. I have the Nov 25 update. Checked the support and no documentation, othwise it would be a 5 star.
30 דצמבר 2019, StrydTeam
Hi Jonathan, thanks for your feedback and review. The reason you do not see a place for your username is because you must have either a ;235/630/635/920/vivoactive or Fenix. Due to restrictions of these devices you will not be able to input your username. I do have a question though, do you see a place to input your ‘cp’ ?
24 דצמבר 2019 | גרסה November 25, 2019
On Fenix 6, the digits in the power field are not centered correctly. In smaller data fields, like the six in one display this causes the digits to be pushed outside the border of the field.
19 דצמבר 2019 | גרסה November 25, 2019
As we can only have one iq app access to Stryd and Stryd Zone can have a secondary display, would it be possible to have Stryd pace shown as the secondary one? The stryd pace doesnot store power info…
17 דצמבר 2019 | גרסה November 25, 2019
Same issue as Albert below. I'm training with power zones on training peaks and the workouts synced with garmin very well.. I can start the running activity with the workout and stryd but...I cannot see the power inside the planned workout field :( It's a problem in order to follow the planned workout because I can't see if I'm running inside the zone.. Can this be fixed? can stryd show the power on the power 3s field on garmin?
18 דצמבר 2019, StrydTeam
At the moment we do not have supported native support or the ability to send data to the structured workout application. This is something we are pushing hard for, but not possible at the moment.
16 דצמבר 2019 | גרסה November 25, 2019
Works 100% with my 6x as it should, the only thing you need with your Stryd. The FB team are amazing as well
🤙🏼 Carlos SabaS 🇪🇸
12 דצמבר 2019 | גרסה November 25, 2019