20 מאי 2020 | גרסה 0.22
Ok, very very Ok.
15 מאי 2020 | גרסה 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
11 מאי 2020 | גרסה 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
12 מאי 2020, jim_m_58
It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.
2 מאי 2020 | גרסה 0.22
It doesnt work in Forerunner 235, i dont know why, please help me!!
3 מאי 2020, jim_m_58
The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.
9 אפריל 2020 | גרסה 0.22
No salecen grados centigrados
9 אפריל 2020, jim_m_58
C or F is based on a standard setting on your watch.
Under Settings/System/Units, set Temperatature Units to C or F.
31 מרץ 2020 | גרסה 0.22
Installed on my Vivoactive HR and doesn't work.
31 מרץ 2020, jim_m_58
Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.
17 ינואר 2020 | גרסה 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
17 ינואר 2020, jim_m_58
The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.
21 דצמבר 2019 | גרסה 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
22 דצמבר 2019, jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor.
As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
31 יולי 2019 | גרסה 0.20.1
17 יולי 2019 | גרסה 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) :
Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause.
Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
9 מאי 2019 | גרסה 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe.
Работает отлично на garmin fenix 5X plus.
2 ינואר 2019 | גרסה 0.18
Great widget Jim! Keep up the good work
12 דצמבר 2018 | גרסה 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
13 דצמבר 2018, jim_m_58
Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.
4 דצמבר 2018 | גרסה 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
4 דצמבר 2018, jim_m_58
Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.
28 נובמבר 2018 | גרסה 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
30 אוקטובר 2018 | גרסה 0.18
Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???
31 אוקטובר 2018, jim_m_58
That's the version number of the app.
25 אוקטובר 2018 | גרסה 0.18
Excellent. Exactly what i was looking for. Totally 5 stars!
Enrique Del paso
30 יוני 2018 | גרסה 0.17-upd3
On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...
30 יוני 2018, jim_m_58
The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.
29 יוני 2018 | גרסה 0.17-upd3
Great and simple
25 יוני 2018 | גרסה 0.17-upd3
Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.
1 מאי 2018 | גרסה 0.17-upd1
Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max
2 מרץ 2018 | גרסה 0.17
13 פברואר 2018 | גרסה 0.17
Shows only Tempe temperature, Internal "Not Available", F3 HR.
13 פברואר 2018, jim_m_58
In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)
11 פברואר 2018 | גרסה 0.16.1
In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app
11 פברואר 2018, jim_m_58
The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.
2 פברואר 2018 | גרסה 0.16.1
Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.