7 gennaio 2022 | Versione 4.14.5a
Molto bello tante configurazioni,buona leggibilità( vivoactive 3)
18 novembre 2021 | Versione 4.11.1
Doesn't seem to be executing DST rules properly. My US Eastern time and CET displays are off by an hour
21 novembre 2021, Beeso27
Mark, I did a bit more testing and checked across a few devices I have. Everything works fine in the Garmin Simulator across different zones, however, on one of the devices I have it was incorrect. I think it must be due to firmware updates not being applied correctly since once I rebooted the device everything worked fine! I have seen this with Garmin devices before and it is very frustrating that a reboot of the device fixes the problem. The devices should be able to restart themselves after firmware updates are applied. Thanks for letting me know I will update the website and publish a notice on the facebook page.
11 novembre 2021 | Versione 4.11.1
4 novembre 2021 | Versione 4.11.1
Bonne application, seul bémol sur ma 245 , le bas de cadran n'est pas visible.
7 novembre 2021, Beeso27
Could you please contact me via the 'Contact Developer' link. I have tested again in the simulator and it appears OK. If you contact me we can work out what the problem is. Thanks
27 agosto 2021 | Versione 4.11.1
Nice watch face. Can you add more second hand style like add for the tip color. I also wonder how about the battery consumption?
Thank you for making it.
18 giugno 2021 | Versione 4.11.1
very nice watch face
21 ottobre 2020 | Versione 4.8.10
Sigue vaciando la batería en 2 días en mi Vívoactive 4. Tengo instaladas otras esferas y solo me ocurre con esta.
22 ottobre 2020, Beeso27
Eduardo, Check you have the latest Garmin firmware. The only time I have seen this happen on some device types it has been due to faults in the Garmin firmware. I will have a look on the forums to see if there are any reported issues for V4 devices. Thanks
12 ottobre 2020 | Versione 4.8.10
Muy completa pero excesivo consumo de batería en Vívoactive 4.
13 ottobre 2020, Beeso27
Thanks for the review. Check the website as there are a few options for saving power depending on the device. The 'always on' second hand does use additional power on larger devices however it should never go over 8% a day. The only time I have seen that is when there have been firmware faults. Thanks
11 giugno 2020 | Versione 4.8.8
Buon quadrante, personalizzabile in tutto, dai colori alle informazioni
13 ottobre 2020, Beeso27
Thanks! The website has a watch simulator built in so you can see what all the options do and use some of the predefined templates.
17 maggio 2020 | Versione 4.8.8
Customizable to the “nth” degree, which means a lot of options.
You can customize and schedule the face changes online which allows you to also visualize the faces. Support is excellent
3 maggio 2020 | Versione 4.8.8
Have been using this watch face for a little while now, it is very customisable - paid features are great (auto different themes in schedule etc) and developer responsive - you can fit a lot of info on the screen yet somehow it is very easy to read, love it
18 marzo 2020 | Versione 4.8.2
What is the refresh rate of weather data?
19 marzo 2020, Beeso27
Thanks for the review! The weather will update each hour. It should be within the first 5 minutes if you watch is connected to the internet via your phone. If you use the Power Saving mode then it will also stop checking for updates whilst Do Not Disturb is active.
24 gennaio 2020 | Versione 4.8.2
Is it possible to make the second hand work constantly? Thx! I have a FR 245
24 gennaio 2020, Beeso27
Yes, select the option on the settings page and make sure you are using no more than 4 different colours. Check the website for full documentation and FAQ help page. Thanks
21 gennaio 2020 | Versione 4.8.2
Je l’utilise depuis deux ans et n’arrive pas à en changer. Par depuis la mise à jour, le problème de police sur les chiffres des complications est toujours existant. Ils sont plus gros et gras.
22 gennaio 2020, Beeso27
I am not sure I understand the problem. If you contact me via the Contact Developer link I will help you. Thanks
3 gennaio 2020 | Versione 4.8.1
Love the watch face but second hand only stays on for short duration then stops (VA4). I only have 4 colours (black, red, white,dark grey)
3 gennaio 2020, Beeso27
Thanks for the review! Just check you don't have any other colours set for features not in use like Home hand, logo, etc. Send me some details via the Contact Developer link and I will help you out. I checked it again in the simulator for the VA4 and it should work.
24 ottobre 2019 | Versione 4.7.2
One of my favourite displays, good work! But why does the second hand disappear when more than 4 colors are used?
24 ottobre 2019, Beeso27
Check the website for details. You will have more than 4 colours defined in your colour palette. Check if the Home hand is set to a time zone then those colours also count. Thanks
10 agosto 2019 | Versione 4.7.2
Superbe application que j'utilise depuis plus de 18 mois sur F5x. Mais depuis la dernière mise à jour, impossible de sélectionner une autre couleur que le bleu.
Sinon Bravo pour le job
11 agosto 2019, Beeso27
Can you contact me via the Contact Developer link and I will check it out for you. I had that issue on FR735XT but has now been fixed. I will check again in the simulator. Thanks
29 luglio 2019 | Versione 4.5.6b
This version works perfectly on my Vivoactive HR. The other version of this did not as I wasn't able to change colours. Great watch face!
29 luglio 2019, Beeso27
Andy, Thanks for the feedback. I am about to release an update to all versions so I will do some more testing on the VAHR before I release it. That device is slightly more restricted on memory. If you contact me via the Contact Developer link I would be happy to investigate further with your help.
1 luglio 2019 | Versione 4.5.6b
This is just the watch face I was looking for. My only problem is that I can’t seem to figure out how to make the optional 3rd hand appear. It might be operator error. Any tips? Thank you.
2 luglio 2019, Beeso27
Matt, Check the web site it has full documentation on the settings as well as a simulator to see what each of them does. The short answer is that the ‘home’ hand appears whenever you are outside the time zone defined. So if you set your home time zone to be US Mountain time with US daylight savings rules then whenever you are in another time zone the extra hand will appear to show the time in Denver. When you are in Denver the extra hour hand is hidden. Ideal if you travel a lot.
8 giugno 2019 | Versione 4.5.6b
Best watch face on Garmin... period!
21 maggio 2019 | Versione 4.5.6b
First of all thank you very much for the wonderful watch face, then I wondered if it is possible to show or add a second hand for the sub dial when time zone is showed.
Thank you very much to make me happy for the above request.
Keep up the good work.
21 maggio 2019, Beeso27
Frank, it is possible but the hands on the sub dials become quite small and difficult to read. If you switch to display a 30 minute time zone , like India, you will see what I mean as that displays an hour and minute hand in the sub dial as the minutes is not the same as the zone your in. Thanks
3 aprile 2019 | Versione 4.5.6b
There is a ton of customization and it cool!
This is one of the best watch face for garmin.
27 marzo 2019 | Versione 4.5.6b
One of my top 2 favorite watch faces. This one is the best quality for the display and has a lot of configuration options. Unfortunately I like the dials that have 2 bits of data in them...e.g. Activity on the dial with HR inside but you can only set Activity as the outside dial info. Otherwise it is a 5*. Well done.
2 febbraio 2019 | Versione 4.5.5
Simply the best analogue watch face out there
18 gennaio 2019 | Versione 4.5.4
Very good looking watch face with a lot of options. Maybe I am missing something but not able to add weather to a dial. Other than that overall it is the best face I have found.