18 novembre 2019 | Versione 3.2.1
On premium version...
1. Unable to remove the walk option... I need only straight go to Hiking, no need Walk option.
2. In vivoactive 4, after started a hiking session, no way to quit the app with Discard & Exit, only Save & Exit works fine.
17 novembre 2019 | Versione 3.2.1
Only shows the activity as "Hiking", not walking, which is what I mainly do, it will therefore show under "other activities". There should be a switch in settings so I don't have to manually edit each activity.
18 novembre 2019, RH-SPORTS
Thank you very much for the bug report. This problem only occurs if the FREE version is active. I will fix this there in the next verison.
29 settembre 2019 | Versione 3.1.0
While hiking the app informed me that simultaneously my walking pace was faster than three miles a minute while my speed was slower than three miles a minute. There was no information I could not get in ordinary data fields. I deleted it.
9 settembre 2019 | Versione 3.0.0
I’ve been using the RH-Sports Cycling, MTB, Hiking and Skiing apps on my Garmin watch for years. They are highly customizable and easy to use. I’m a big fan.
23 agosto 2019 | Versione 3.0.0
Hello, after 3h of hiking I wanted to save and exit, vivoactive 3 music bugged, the app stopped, the watch needed to reboot in order to have all the iQ apps working, so need some work, but good app
18 agosto 2019 | Versione 3.0.0
I used this app for the first time today. Strava said the hike was 3.31mi and this app reported 2.82 when it finally transferred to my phone. Who's right?
18 luglio 2019 | Versione 2.9.0
It's not easy to customize.
I installed it for the map. But it shows only a portion of your hike. Do it's entirely useless for a loop.
19 luglio 2019, RH-SPORTS
If you are in the map view you can press the start button to enter the Zoom view. There you can select out of several zoom options to see the whole map.
30 giugno 2019 | Versione 2.8.1
Burns up your battery like crazy. And every few minutes it zaps your wrist to remind you that you have the free version. It’s incredibly annoying. And it doesn’t do anything that the built in hiking app does. Not for me.
5 luglio 2019, RH-SPORTS
A good development costs several hundred hours of work. As clearly documented, the Free version reminds to upgrade regularly. The Pemium version is not doing that anymore and also offers power modes to save battery.
28 maggio 2019 | Versione 2.7.0
Thanks for the app! Bought the whole kit and very satisfied! Please: 1) Add HRV everywhere, 2) Implement everywhere choosing the type of occupation from the watch menu! 3) Remember the choice of the last selected type of occupation! Andrew! 4) Make a field for this application! With all respect, Andrew!
9 maggio 2019 | Versione 2.6.0
I like this very much. However, it seems to have changed some functioning on its own. I am using it on fenix 5 Sapphire, paid version, deleted and reinstalled today. The new behavior appeared maybe a week ago, and persists after my update of today. What I don't like is that I now have to press more buttons than I used to. Here's what happens when I want to do a hike
A) Starting the hike:
1. Press the start/stop button to show apps, with favorites first.
2. Hiking app is first item in my favorites so I press start/stop again. It quickly shows the premium screen and then shows the list of activities, with Hiking shown first.
3. I press start/stop again. It looks for GPS and then when ready (about 20-30 secs often) it shows the main screen with various fields.
4. I press start/stop again to start it. It pulls up a menu of items that has Start Session as first item, then below it, Navigation, then below it Exit App.
5. I press start/stop again to start the session and it starts!
But that was 5 presses to get at what was my first favorite, and when I already had hiking as my default activity. That seems like too much. And I think it used to be fewer presses. I'm pretty sure press #4 wasn't required before.
B) Stopping the hike:
1. Press start/stop. It brings up menus with Pause Session as first item, then Navigation below it, then Save and Exit below it.
2. Press down once.
3. Press down again to be at Save and Exit.
4. Press start/stop to save and exit. Now it shows the apps list with favorites first, and the Hiking app therefore first.
5. Press back to get to the watch again.
So that's 5 presses. I'm pretty sure I didn't used to need to do both steps 2 and 3, so there is at least 1 more press before.
Is there any way I can change settings so that I don't have so many presses?
23 maggio 2019, RH-SPORTS
Thank you very much for your feedback. I significantly improved that in the last released version.
- T -
12 aprile 2019 | Versione 2.4.0
Ich habe die App jetzt schon einige Urlaube im Einsatz und bin vollkommen zufrieden!
17 marzo 2019 | Versione 2.4.0
Very good app, I've bought premium version. I like autopause feature.
12 gennaio 2019 | Versione 2.2.0
The app is good, but not for me. I tried to remouve it. I'm not able. My device crash every time.
1 febbraio 2019, RH-SPORTS
The complete installation and de-installation process is handled by Garmin without any influence of 3rd party apps
27 ottobre 2018 | Versione 2.2.0
It offers the possibility to customize numbers of 4 or 7 data field pages which can be fully free configured by yourself (in premium version).
My opinion: 5€ worth
21 ottobre 2018 | Versione 2.2.0
I love the app...
I use it on a forerunner 235.
Easy setup, enough data...
1 question: It's set on "walking" because most of the time I walk on the road and offroad.
When I put it on walking, garmin connect gives me a "green" window (good walk) but no periodic data (after each km), just the total of the walk.
When I put it on Hiking, I get a "red" (bad walk) window, but I see the data of each km...
What can I do?
3 ottobre 2018 | Versione 2.1.1
I can't believe I donated to this disappointing app. I used this app on a hike from Tres Cime in the Dolomites. It recorded a 4.5 mile hike(mostly all descent) as 1.87 miles. Fortunately I had Gaim GPS running on my phone to record the actual descent.
14 ottobre 2018, RH-SPORTS
I took a look at the results. For me it looks that the Auto-Pause mode is active. This is indicated by a yellow pause signal. During Auto-Pause no session recording is done. This has impact to several data fields like distance, ascending, descending, session time, etc. Please disable the feature in the app settings by setting Auto Start/Stop limit to 0.
16 settembre 2018 | Versione 2.1.1
7 giugno 2018 | Versione 1.8.0
Habe Hiking, Swimming und Running Premium gekauft und finde die Apps super und das alles für kleines Geld Die Swimming App habe ich jetzt 7 Wochen lang täglich im Meer mit der Garmin Vivoactiv HR getestet. Einfach für mich perfekt. Großes Kompliment an den Entwickler. Zur Running App eine Frage: gibt es eine Lösung GPS wie bei der Hiking App auf Ultratrac umstellen um Akku zu sparen?
14 maggio 2018 | Versione 1.8.0
Great, but what GPS power option is closest to "smart" for the default app?
11 maggio 2018 | Versione 1.8.0
I love the app, got the paid version. Is there an autolap function? I can't see one anywhere
13 febbraio 2018 | Versione 1.7.0
This app is really great. Just a quick glance and all the information you need is there. No need to dig out your phone and unlock it. The fields are easily customizable with lots of choices. And a quick response when I had a question.
9 gennaio 2018 | Versione 1.7.0
Ich nutze die Cycling-, die Cross-Country- und die Hiking-App. Alle drei Apps sind richtig toll. Bei der Hiking-App fehlt mir lediglich der Lap-Mode. Wäre sehr schön, wenn dieser in der nächsten Version enthalten wäre. In den anderen Apss ist er ja auch drin. Weiter so, vielen Dank.
6 gennaio 2018 | Versione 1.7.0
Although the application says that the data field changes have been successfully updated, they never are. The data fields stay with the default values
15 ottobre 2017 | Versione 1.5.0
Erstmal Super App. Habe mir Premium für alle Apps gekauft um die Entwicklung voranzutreiben. Habe vivoactive3 und viele Apps sind noch nicht kompatibel.
Bei dieser App fehlen im Vergleich zu anderen Apps: 1. Waypoints erstellen. 2. Die App kurzzeitig zu verlassen um andere Widgets einzusehen (mit Swype nach rechts). 3. Eigene Datenfelder einbinden oder zumindest eine Kartendarstellung der Route. Zumindest konnte ich diese Einstellungen nicht finden.
Ansonsten sehr übersichtlich und gut lesbar.
Volle Punkte, wenn die fehlenden Funktionen ergänzt wurden (gibt es ja bei anderen, kostenlosen Apps auch)
26 settembre 2017 | Versione 1.5.0
Diese App ist einfach super.
Ich benutze auf meiner Garmin fenix 3 HR die Cycling und die Hiking App in der Premium Verision (Early Bird) und eigentlich meist nur die 7 Field View.
Diese kann ich so konfigurieren, dass ich wirklich alle für mich relevanten Informationen immer direkt sehe. - PERFEKT !!!
Das Einzige was ich schade finde ist dass ich die heruntergeladenen Apps offenbar nicht in die Garmin-Interne Multisport App integrieren kann. Sie werden dort einfach nicht angeboten, sondern nur die Garmin Standard Apps. Ich fahre oft mit dem Rad zum Berg, steige dann rauf und runter und dann mit dem Rad wieder nach Hause. Dazu bietet Garmin eigentlich die Multisport-App an, mit der ich zwischen versch. Apps hin- und herswitchen kann, und ich schlussendlich aber nur 1 Activity habe.
Wenn ich die Hiking und Cycling App verwenden will, muss ich dazu jetzt 3 Actitivies verwenden (2x Cycling und 1x Hiking).
Geht das wirklich nicht, oder mache ich was falsch ?