Analog Switch Sports

Risposta sviluppatore
22 gennaio 2021, 2aCD

Hi, unfortunately the live heart rate on main view is not supported on a fr54. Only watches with a always on second hand have the needed refresh rate of 1 per second. Therefore the athlete have no HR on a fr45. That’s a hardware limitation. This Symbol is for Movebar, status of inactivity. After 60 min inactivity the indicator brin the first step. After 15 min the next and so on. The bar is full after 120 min of inactivity. After ca. five minutes of move the bar is reset. The watch track this values and I only translate this values from 0 to 5 to a graphical view.

Risposta sviluppatore
18 ottobre 2020, 2aCD

Hi, the Venu has an AMOLED display with full color palette and a lot of free memory for watch faces. Therefore I use full color pictures for this devices. Only the VA4 series have the same memory definitions as Venu to use big pictures, but only with 64 colors. Images don't look particularly good with it. I’ll try to use the images on VA4 series. We will see how it looks. Best regards 2aCD

Risposta sviluppatore
4 ottobre 2020, 2aCD

I think you have not completely understand what the athlet symbolize. The upper area show the battery percentage, not a separat symbol. This is not an issue, its a feature. Please press contact to developer, have you any questions. Best regards 2aCD

Risposta sviluppatore
1 settembre 2020, 2aCD

Thanks for five stars. Yes it is. Garmin doesn't actually support antialiasing for watch faces. Only the internal watch faces use antialiasing for hands. There is one exception, however, and that is the rendering of fonts. And therefore I have create the hands with customized fonts. The only device with standard hands is Venu. The display resolution is high enough to draw hands without this technology. If you need more technical details, press contact to developer. Best regards 2aCD

Risposta sviluppatore
19 agosto 2020, 2aCD

Hi, thanks for your 5 stars. The arrows around the date switch to red, when you have your phone connected and you have messages that has not yet been read. The color switch back after clear all messages. The night mode 1 and 2 start with activated DND mode (your defined sleep time) Mode 1 disabled some elements during this time to save energy, and Mode 2 in addition refresh the display every 5 minutes only. You. See then only little dots every minutes. This save a little bit more energy at sleep time. Best regards 2aCD

Risposta sviluppatore
14 luglio 2020, 2aCD

Hi thanks for your interest. Unfortunately the theme football is removed on some older watch types. I had some critical reviews that too much memory is required. And so I have removed some themes and other features on fenix 3 series and fr 230 series. Witch watch type are you use? Press Contact to Developer and give me a hint. I‘ll see if I can enable the football theme again. Best regards 2aCD

Risposta sviluppatore
26 gennaio 2020, 2aCD

Hi, thanks for five stars. To disable the switch between Main View and Activity View set the option ‘show Activity View’ to ‘off’. You find it on the lower area of settings. If you have disabled the Activity View, you can set the heart rate to ‘gesture’. Than the heart rate is show instead the Activity View. Have fun and best regards 2aCD

Risposta sviluppatore
19 gennaio 2020, 2aCD

Hi, thanks for your 5 stars. Unfortunately I can’t get values for active minutes and climbed floors from a fenix3. Therefore the activity view is removed on this device. Best regards 2aCD

Risposta sviluppatore
11 gennaio 2020, 2aCD

Hi, the correct GPS-position data are missing. To create this data start an outdoor activity with GPS and wait until GPS say ok. That’s all. When you change your position over 100 km/mi then it’s important to update this data to show the correct sunrise/sunset from your new place. Best regards and have fun 2aCD

Risposta sviluppatore
27 dicembre 2019, 2aCD

Danke für einen Stern. Das ist kein Problem dieses Watchfaces sondern Garmin-typisch. Man kann kein Design deinstallieren, welches in Gebrauch ist. Bitte vorher ein BuildIn-face auswählen und aktiv machen, dann erst deinstallieren. Unglaublich aber wahr. Select another watchface before you start a deinstallation.

Risposta sviluppatore
21 dicembre 2019, 2aCD

A little hint to save energy on older watch types - disable minute marks - if you don’t need live heart rate at gesture, disable it - use the digital second hand or disable it - set the half backgtound to unicolor this settings helps to use a bit lower energy consumption on older devices. Un petit indice pour économiser de l'énergie sur les anciens types de montres - désactiver les marques de minutes - si vous n'avez pas besoin de la fréquence cardiaque en direct au geste, désactivez-la - utilisez la seconde main numérique ou désactivez-la - définir le demi-fond sur unicolore ces paramètres permettent d'utiliser une consommation d'énergie légèrement inférieure sur les appareils plus anciens. Thanks and have fun 2aCD

Risposta sviluppatore
18 dicembre 2019, 2aCD

Hi, The gesture control works when the wrist is turned towards the body. If this is not work, enable the watch backlight at gesture (only by activity is enough) Best regards 2aCD

Risposta sviluppatore
6 dicembre 2019, 2aCD

Hi, thanks for your five stars. The graphical issue is fixed in version 3.7.1 Best regards 2aCD

Risposta sviluppatore
21 novembre 2019, 2aCD

With new version 3.6.2 energy consumption is optimized. You find settings, to save energy in the watch face description. Have you any questions, press contact to developer Best regards