Barcode Wallet

Svetoslav Bonev
19 gennaio 2020 | Versione 0.9.2

Stopped working with ean 8 - always get checksum is wrong!

Bourke Vaughan
5 gennaio 2020 | Versione 0.9.2

It works well. Minus a star for missing help or quick reference code type key. i.e. input format: [yourLabel];[codeTypeKey];[theCodeToDisplay] when examples are erased what are valid codeTypeKeys?

Jonathan Rollheiser
1 gennaio 2020 | Versione 0.9.2

I tried to put some codes in and they aren’t working on my arch. Every time I select it on my watch it comes up with unknown wrong format. I don’t know what is wrong.

Mauro B.
1 gennaio 2020 | Versione 0.9.2

difficult to understand which [type] to use. It would also be a good thing that if a code is selected, you can go to the next Code - without having to select one in the main menu.

Johan F
22 dicembre 2019 | Versione 0.9.2

Works fine on Vivoactive 4S (tested EAN13 + CODE128). Presents a new problem though: what about the situation where you used to give the loyalty card to the cashier... Should I now give my watch instead? :-)

David Ceremuga
9 dicembre 2019 | Versione 0.9.2

If you have an iphone, you can quickly get the type of barcode with a free app called Qrafter. This works great, though code39 barcodes are pretty condensed on the screen. They will scan though. To the Author. THANKS!!

Krebs
5 dicembre 2019 | Versione 0.9.2

Is it just me or has somebody made the same expierience? If I try to set my client cards, it always shows me that its incorrect. Sure the most cards have 19 numbers maybe that's the problem..

Albert Wen
3 dicembre 2019 | Versione 0.9.2

Very good tool。I don’t need to carry many cards.

Anton
27 novembre 2019 | Versione 0.9.2

Would be nice to be able to name and diffrenciate between codes

Thomas Fox
19 novembre 2019 | Versione 0.9.2

Works on first try. Nice and simple.

Jason R
18 novembre 2019 | Versione 0.9.2

Works great. One minor note the aspect ratio seems a bit off on fenix 6x. Barcode teller than need be and it's not using full width of screen.

Thomas Jones
17 novembre 2019 | Versione 0.9.2

Great, only took me a little while to work out what “type” was and took a while to figure it out if you can’t figure it out I would suggest this website https://www.barcodefaq.com/barcode-matc helped

Steve Clark
15 novembre 2019 | Versione 0.9.2

Excellent! Once I understood the input format it's very easy to set up and use.

--
14 novembre 2019 | Versione 0.9.2

Appreciate the effort, but entering codes highly unintuitive. 2D/QR codes can't be entered. Most importantly on Vivoactive 3 going into and exiting widget causes watch face to disappear/must restart.

Jeff Huget
11 novembre 2019 | Versione 0.9.2

Worked the first time on my gym barcode pass and the staff was excited. Sweet widget - thank you!

Carly Hibberd
1 novembre 2019 | Versione 0.9.1

Hello does this app support the parkrun barcode?

Davide Belletti 🇮🇹
25 ottobre 2019 | Versione 0.9.1

I like the app but I found a bug: you can't delete the first seven demo code, you can only change them with another

Remi
15 ottobre 2019 | Versione 0.9.0

Nice !

Dorwin
10 ottobre 2019 | Versione 0.9.0

maybe good, but I would like to enter longer EAN codes. tesco has 18 digits

Evelyn Phang
7 ottobre 2019 | Versione 0.9.0

The code does not fill the whole watch face.. so its too small for the bar code reader to read. How can i make the code .. longer ? This is for a CODE39 code - S1234567B

Bill-Chatto
5 ottobre 2019 | Versione 0.9.0

This app works perfectly once you figure out the correct format to use for each code. You don't have to twist your arm for any reader to scan code. It even reads them upside down!

André Zeiger
2 ottobre 2019 | Versione 0.9.0

Nutze es auf einer Fenix 6x Saphire. Funktioniert super. Gibt es eine Empfehlung, wie man erkennt, welcher Barcode-Typ verwendet werden muss?

Vanessa Meier
30 settembre 2019 | Versione 0.9.0

Ich habe es geliebt! Aber es funktioniert nicht mehr. Man kann ; nicht mehr benutzen wie in den beispielen vorgegeben. Es steht nur zahlen und ziffern. Aber das geht auch nicht

Joshua Paulsen
28 settembre 2019 | Versione 0.9.0

Running a fenix 6 pro. Tried installing barcodes but getting “no spaces or ;” as others mentioned. Followed the developer’s recommendation & uninstalled garmin connect (pain, btw); still be the error.

Matt
28 settembre 2019 | Versione 0.9.0

Removed previous review.Needed to fire up my desktop to add parkrun barcode, loaded up lovely thanks. Not yet tested at parkrun