11 maggio 2020 | Versione 0.15.1
temperature in Farenheit degrees. I have not found a way to convert to celsius
13 maggio 2020, jim_m_58
That's based on the temperature units set on your watch. It's under settings-system-units on the watch itself.
31 dicembre 2018 | Versione 0.15
Great app! I use it all the time. I wish it could support more hours of data (ie up to 48 hrs) for the barometer, but my guess is that's a limitation of the watch firmware, not the app (at least on my Vivoactive HR). If anyone is looking for the optimal colour schemes (the app is customizable), I find black background, light grey temperature and white air pressure offers a good amount of contrast between the three, so you can easily read the text and see the two graphs... it's not perfect but so far it's the best I've found.
If the developer would like a couple suggestions: 1) Could there be a timeline at the bottom of the graph (to remind users that it's 4 hrs of data, and to help determine when temp/pres changes occurred)? At the very least 4 bars or dots to indicate each hour would really help. 2) The way the barometer data is displayed makes it appear as though the air pressure is very unstable. In other words, even if the pressure increases/decreases just a little over the 4 hrs, the graph is drawn to show a massive climb/drop, using the entire "y axis". Would it be possible to have an option for the y axis to remain constant (eg from 940 to 1060 mbar)? That way if the pressure is only changing a little, it will show a mostly straight line.. or if I see the pressure dropping, I know it's a significant change. Thanks!!
31 dicembre 2018, jim_m_58
Yes, in this, I only use the data as saved by the firmware. I do have a widget for the internal temperature that will do up to 24 hours:
For other things, I'll consider them!
4 giugno 2018 | Versione 0.15
Il mio vivoactive hr non indica i dati della pressione, mostra solo la temperatura
4 giugno 2018, jim_m_58
There is a bug in the current vahr firmware where the pressure data isn't available. The app will work when the firmware is fixed.
2 marzo 2018 | Versione 0.15
The app works fine on VA3. Even though the colors are configurable, the units aren't (I'd need the pressure to be in mmHg). The pressure at the sea level does not seem to be adequate if you live far from a sea coast.
2 marzo 2018, jim_m_58
The units switch from inches to millibars bast on the testing on your watch. MSL is all that was available directly when this was written, and is what's used in weather reports, etc.
16 febbraio 2018 | Versione 0.15
The app could be ok but it doesn't work on vivoactive 3
17 febbraio 2018, jim_m_58
How doesn't it work? Please use Contact developer, and provide a few details, FW version, etc.
Note, the temperature is from the internal sensor and won't be the ambient temperature.
6 febbraio 2018 | Versione 0.15
You should inform people, who wish to download your app, that the temp measurement is "body" temp not outdoor temp unless, of course, you leave your watch outside un-attached to one's wrist.
7 febbraio 2018, jim_m_58
That sounds like a suggestion (I thought I did say it was internal). Might not be the reason for a poor review though.... See my "Temps" widget that shows both internal and a Tempe if one is connected.
28 gennaio 2018 | Versione 0.15
Hi, the widget is nice, but a I have a question. Is the pressure at sea level? Always dial 1034-1037 Mb regardless of whether I am 800 meters altitude or 2000 meters.
29 gennaio 2018, jim_m_58
Yes, it's Sea Level Adjusted
15 gennaio 2018 | Versione 0.14.1-upd
hello great App but cant u make it for longer periods of time
i would love to see a weekly , monthly or even yearly or more temp scale!
26 dicembre 2017 | Versione 0.14.1-upd
No display of pressure with software 4.30 for me. Shows 0.30 - 0.40, nothing relayed to hPa.
26 dicembre 2017, jim_m_58
There is a bug in the 4.30 firmware on the va-hr where the pressure graph isn't available.
5 dicembre 2017 | Versione 0.14.1-upd
Не показывает давление после последнего обновления. Vivoactiv hr.
5 dicembre 2017, jim_m_58
Latest update to the app or to your firmware? Please use Contact Developer.
11 ottobre 2017 | Versione 0.14.1
Hi, simple, effective widget, thank you. Only query is how come there is no scale for the temperature. Any chance you could add a scale or annotate the high/low temperatures? Thanks
3 ottobre 2017 | Versione 0.14.1
The temp is way off on my Vivoactive 3. 30 Degrees off. Pressure seems right. Am I missing a setting for location?
3 ottobre 2017, jim_m_58
The internal temperature is impacted by body heat. It's the same on all watches with an internal temperature sensor. I only report the data I see from the firmware.
1 aprile 2017 | Versione 0.10a
I agree with the comments regarding doing only 3 lines to increase font size. Perhaps temp on the left, pressure on the right, top to bottom showing high, now and low, with now being highlighted.
Also agree that being able to fix the scales in settings would be very useful.
Finally, would love to be able to apply a fixed altitude compensator so the pressure becomes more useful, being that at sea level. I live 960m above sea level so a reading of 910mb (actual) is not as useful as 1011mb (the compensated reading).
Otherwise, great widget and very useful. Thanks for developing it.
25 marzo 2017 | Versione 0.10a
Thanks for providing app. This worked great, however currently the pressure part shows "nan". What does this mean? Something wrong?
19 marzo 2017 | Versione 0.10a
can you make the font size customizable? it a little small to see clearly...
20 marzo 2017, jim_m_58
I'm using native fonts, and if they were larger, they either wouldn't fit due to width, or would take much of the space for the graphs.
20 gennaio 2017 | Versione 0.10a
The displayed current pressure is lower than real barometric pressure compared to WU PWS and the other barometer widget. The differences is about 18 mbars.
6 febbraio 2017, jim_m_58
That sounds like something with your device, as the widget only reports what it's recorded by the firmware.
13 gennaio 2017 | Versione 0.10a
1) A nag screen with an icon and the name of the widget??? c'mon please remove that.
2) about scales: The dynamic Y axe from minimum to maximum would be a good approach for a secondary (zoom in) screen; I think the main screen should include a fixed Y scale i.e. from -10 C to +40 C ( 14F to 104F) the same for pressure.
3) Read outs:
a) please remove the line with the name and version of the widget.
b) remove "lo:" and "hi": just write the 3 values vertically like
and their unit C or F, etc.
This way you just use 3 lines of text instead of 5; that means more room for a bigger/more readable font.
c) A bigger/more readable font is a must.
For the rest very good widget.
6 febbraio 2017, jim_m_58
the "nag screen and icon" is a function of the firmware, and isn't done by the widget itself. It's the same for all CIQ widgets on the va-hr.
The scale for both graphs is from lowest value to highest.
20 novembre 2016 | Versione 0.10a
On my Garmin vivoactive hr the temperature is not correct neither if I consider the data as celsius, neither if I consider it as farenheit. How should I read the temperature?
7 dicembre 2016, jim_m_58
The temperature units are based on the setting on your watch (Settings-System-Units-temperature)
As this widget displays the data from the internal temperature sensor, it can be a bit off as it's impacted by things like your body warming the watch, and if you are wearing long sleeves or a jacket.
16 settembre 2016 | Versione 0.10a
Work great! Just what I was looking for.
If you could add some small scale of temp and time similar to the default heart rate widget and with bigger numbers, it would be perfect
13 settembre 2016 | Versione 0.10a
Love it! Keep it one swipe from my simple heart or graph sometimes watch face!
10 settembre 2016 | Versione 0.10a
What i missed from my casio, you gave it to me. Thank you for the super widget. If you can add a forecast icon like sun - clouds - rain it will be awesome