9 agosto 2022 | Versione 1.2.3
The heart data field is perfect, but the power one is terrible.
Before zone 1 and after zone 7 there are 2 big zones that use almost half of the total bar so each zone become very small!! I can’t use it like this!
9 agosto 2022, ronnywinkler
It depends on your zone settings. Just go to app settings and set lower and upper bound of your zones to a value that looks good on the screen. If you want to add your time outside these zones (lower than 1 and higher that 7), deactivate the option "count only inside zones". In addition you can set at lowest value to prevent counting time below this value (traffic light stops...). For further questions please use the "contact developer" form.
Mindas, O Bardina
16 febbraio 2022 | Versione 1.2.2
Works great! Actually, both the Power and HR zones fields from the same developer are a must-have for me.
Thank you very much for your work!
19 gennaio 2022 | Versione 1.2.1
Is it possible to have the data written to the. fit file, so that we can read in Garmin connect after the session? That would be great. Thanks. A very good app.
19 gennaio 2022, ronnywinkler
No, that's not possible. The data is written by the activity (in most cases default Garmin activities like cycling). The datafield only displays the current activity data and is calculating temporary some values tu show the chart. A datafield has no write access to the fit data.
14 gennaio 2022 | Versione 1.2.1
Very nice data. Would be nice if there was an option to hide the ‘time spent in zone’ bars that stack on the zone. Also option to color them based on zone maybe
6 dicembre 2021 | Versione 1.2.1
Great. What value should I put in the power zone 1 if my zone 1 goes to 175w? I don't know if I should insert 0 or 175.
7 dicembre 2021, ronnywinkler
Hi Igor, You can set it to a value which makes the chart looking good on the screen, for example the same size like 2nd zone. In addition you can unset the option "count only inside zones". This way, all power values lower than your low border of zone 1 are added to this zone.
In addition, use the option "min. PWR-value“ to ignore power values below this value. So you can stop counting if your are waiting at a traffic light.
1 novembre 2021 | Versione 1.2.1
Very good app, but I would need the 30s average power value and also the 60s average power value too in the settings options.
I would like this choose because when I don't wear the heart rate band, I like thinking my power like my heart rate. So if the the average value is too short (for example 10s), the power value changes too fast and this is not like how the heart does. I hope you can understand.. Thank you very much if you do it.
24 agosto 2020 | Versione 1.2.1
Danke für die beiden (Power, Puls) klasse Datenfelder. Sie sind auf meinem 1030 nicht mehr wegzudenken! Ich hätte einen kleinen Verbesserungsvorschlag/Wunsch: Ist es möglich die "normalized power" noch reinzubasteln? Danke, mach weiter so ...
13 maggio 2020 | Versione 1.2.1
It's quite good, but as someone said before, could you make an option to have all zones with the same width? Otherwise zones 1 and 7 take most of the space and zone 4 is almost invisible... Thanks for the great work!
14 maggio 2020, ronnywinkler
The datafield is designed to show the columns in zones width. The line below with the arrow gives you a linear view of your zones and your current power. Just define the zone 1 and 7 smaller (zone 1 low value, zone 7 high value) to put the focus on the inner zones and unset the option "count only inside zones". So you can arrange the zones much better in the chart without loosing the counting of power outside these zones.
8 aprile 2020 | Versione 1.1.1
the app should have the ability to set zones automatically based on profile data such as the heart rate app
8 aprile 2020, ronnywinkler
It's not possible to read these zones from user profile. The Garmin API doesn't provide this functionality for apps/datafields.
3 marzo 2020 | Versione 1.1.1
All fantastic. But the Power bar Is unbalanced to z7. I tried to modify like in the previous comment but no effect
3 marzo 2020, ronnywinkler
Please use the "contact developer form" to send me your zone definition (values list). Add your email address, so I can answer by mail. Thanks.
29 dicembre 2019 | Versione 1.0.10
Fantastic datafield. Thank you. Very usefull in any ride. May I ask you to add a little title? Just to quickly identify it from your HR zones datafield which is awsome itself.
And another idea might be something that indicates balance between left and right, even just a percentage or a slide in bigger fields.
Nice job indeed.
3 febbraio 2020, ronnywinkler
A caption is added now for this field.
Balance (left/right foot?) is not possible to read for a datafield.
I added average power instead (as value setable in app options and as pointer in the chart). I hope that is useful, too.
21 luglio 2019 | Versione 1.0.8
Great Datafield. I've been using it for years. Just a little suggestion: Is it possible to spread the bars more evenly? I mean, zone 7 is a very big range (hundreds of watt). I takes most of the space of the datafield. But I hardly ride in Zone 7, but 2-4 instead. Please make all bars the same width!
23 luglio 2019, ronnywinkler
It's already possible. Just change the low value your zones 1 and high value of your zone 7 to a value you want - so the bars get a wished width (e.g. same range like the zones 2 and 6. Then set the app option "Count only inside zones" to "off". The zones 1 and 7 are displayed smaller and all PWR values lower zone 1 will be added zu zone 1 and all PWR values higher that zone 7 will be added to zone 7.
Please set the separate option for PWR-max ist you want to display the PWR-% based on PWR-max. It's calculated with this option and not with the high value of zone 7.
Manuel Antonio Gomez Mate
18 maggio 2019 | Versione 1.0.4-upd1
For me it is great. This is what I was looking for.
Just a suggestion. It would be great if you can set the average time for Power instead fixed 3s to selectable between 1, 3, 5, and 10. More than 10 it is not very usefull.
27 giugno 2019, ronnywinkler
Thanks for your suggestion. The new version offers you the possibility to select the range in seconds (1..10) for calulation of mean power. Please select it in the app options. The default is 3 seconds.
11 maggio 2019 | Versione 1.0.4-upd1
Merci pour avoir ajouter le digit de zone.
26 ottobre 2018 | Versione 1.0.4-upd1
Si se pudiese elegir el tiempo de la media además de 3s.que tuviese 10s. etc, estaría muy bien.
Y si sólo indicando el FTP ya calculase las zonas.... sería perfecto.
19 ottobre 2018 | Versione 1.0.4-upd1
Sehr gute Visualisierung meiner Leistungsdaten und auf dem 1030er permanenter Begleiter auf dem Rennrad.
Vielen Dank an den Entwickler für die Mühe!!
21 dicembre 2017 | Versione 1.0.1-upd
Fatta molto bene, FC e % perfetto. Grazie mille.
6 settembre 2016 | Versione 0.1.5-e82
24 luglio 2016 | Versione 0.1.5-e8
This is just what I needed. Thank you so much! Works perfectly for me.
13 luglio 2016 | Versione 0.1.5
Great! 3 sec Power is a good decision! Works perfect!
28 giugno 2016 | Versione 0.1.3
I used the 0.1.1 version
I had quite a problem. However, the 0.1.3 version seems to have resolved the problem.
I do not speak English well, but I'm not as stupid as you think.
28 giugno 2016 | Versione 0.1.3
This app works as it's supposed to!
No problems with Ant+ sensors! (here: Stages Powermeter and Wahoo HRsensor).
(...and it's hard to believe that it might cause problems with sensor reception, because - I suppose - it establishes no connection to any sensor - just reads out data from your Edge)
28 giugno 2016 | Versione 0.1.1
Use heart senser togerter, this power datafield make error...