Name: Graphic Cycling Dashboard with Power Meter
Rating: 4 (15 reviews)
Author: QQSTARS

[~ TIPS: Because one device only allow to connect to same device once, so if you want to configure PowerMeter Sensor ID manually, and show Balance/TE/PS, you need to disable Edge internal PowerMeter pairing ~]
-
Due to limitation of Memory size on Edge 520, I have create a Lite version.
Compared to FULL version:
1. Lite version does NOT support PowerBalance/TorqueEfficiency/Pedal Smoothness and Garmin Vector Phase graphic;
2. Lite version does NOT support configure detailed zone value (But still support set LTHR or FTP and automatically calculate zone). 
Get LITE version from:
https://apps.garmin.com/en-US/apps/94bee471-9e3b-45e6-bf2b-b41ea03b52a1
-
-
Functional Description:
1. Support colorful zone area for easier reading;
2. Support more meaningful Slope display;
3. Support configure zones with easy way (Just set LTHR or FTP) or configure zone detailed;
4. Support directly connect to ANT+ power sensor to retrieve Balance/Torque Effectiveness/Pedal Smoothness (ANT+ Code from Joel Cass);
    Also you can just remain Power Meter ID as 0 to share System Power Meter data. BUT NOTICE the Phase data comes from simulation calculation but NOT actual data!  (Simulation data shown as GREEN and actual data shown as BLUE)
[TIPS: Because one device only allow to connect to same device once, so if you want to use Balance/TE/PS, you need to disable Edge internal PowerMeter pairing]
5. Support DI2 gear information (Required CIQ 1.2.10 or newer);
6. Support Garmin Vector Phase graphic;
7. Support calculate NP. And will show NP and Average Power alternately.
-
Configuration Description:
Pre-Steps:
1. Connect your power meter with your Edge Device. And from Sensor - Info - ID, to get Power Meter Device ID, like 74256;
2. Measure your LTHR (Lactate Threshold Heart Rate) yourself;
3. Measure your FTP (Functional Threshold Power) yourself.
-
Configuration:
1. Use Connect Mobile App or Express software to configure parameters;
2. You MUST input Power Meter Sensor ID, otherwise Balance/TE/PS cannot be retrieved;
3. ONLY input LTHR and FTP value. Remaining ALL zones value as 0 to automatically generated;
4. Run and show the DateField once. And Zones value will be automatically calculated and updated;
5. If you want to manually configure your zone detailed, you can use App or Software to configure parameters again, and auto-calculated zone values will be there and can be modified.
-
Color and Zone Description:
Generally, Green Color means Competition Zone. And you can continually output around 1 hour.
If drop down into Blue or similar color, means your output lower than expected. Lighter means lower.
If raise to Yellow Color, means you enter Anaerobic Boundary Zone. So you can only continually output around 10 to 20 minutes.
If raise to Purple or Red color, means your output extremely high. And you can only continually output around 1 to 5 minutes.
-
Speed Meter / HR / Power:
1 - Bright Blue - 0 to 20km / HR Recovery / Power Recovery
2 - Light Blue - 20 to 30km / HR Endurance / Power Endurance
3 - Blue - 30 to 35km / HR Tempo / Power tempo
4 - GREEN - 35 to 40km / HR 4 zone Sub Threshold / Power Threshold (CP 20 to 60)
5 - Yellow - 40 to 45km / HR 5a zone Over Threshold / Power VO2Max (CP 12 to 20)
6 - Purple - 45 to 50km / HR 5b zone Anaerobic / Power Anaerobic (CP 6 to 12)
7 - Red - Over 50km / HR 5c zone Sprint Max / Power Sprint Max (CP 1 to 6)
-
Cadence Meter:
Light Blue - 0 to 50
Blue - 50 to 80
GREEN - 80 to 110
Yellow - 110 to 130
Red - Over 130
-
Slope Meter:
Light Blue - Negative slope
Green - 0% to 5%
Yellow - 6% to 10%
Pink - 11% to 15%
Red - Over 15%
(Beside color, at the bottom of Slope Rectangle border, contains actual Slope Graphic to make it easier to read)

Graphic Cycling Dashboard with Power Meter

[~ 说明：由于单一设备仅能创建单个连接到另一个指定设备，因此如果手动设置了功率传感器ID，来显示平衡/效率/平滑数值，则需要临时禁止Edge设备内部功率计的配对 ~]
-
由于Edge 520的内存限制问题，因此独立制作了Lite版本。
相较完整版本，区别在于：
1. Lite版本不支持功率平衡/扭矩效率/踩踏平滑以及Vector功率踩踏相位图形数据；
2. Lite版本不支持自定义每个区间的细化设定（但是仍然支持设置LTHR和FTP并自动计算各个区间）。
Lite版本地址为：
https://apps.garmin.com/zh-CN/apps/94bee471-9e3b-45e6-bf2b-b41ea03b52a1
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
功能说明：
1. 支持彩色化显示各个区间以提高数据可读性；
2. 支持图形化的坡度显示；
3. 支持简易配置区间（只设置LTHR和FTP）也支持精细设置各个区间；
4. 支持直接连接ANT+功率计读取功率平衡/扭矩效率/踩踏平滑数值（ANT+代码源自Joel Cass）；
    如果不对APP配置传感器ID，则和系统共享功率计数据，但踩踏相位数据为模拟计算获得！（模拟计算显示为绿色，真实传感器数据显示为蓝色）
[说明：由于单一设备仅能创建单个连接到另一个指定设备，因此如果想显示平衡/效率/平滑数值，则需要临时禁止Edge设备内部功率计的配对]
5. 支持DI2齿比数据（需要CIQ 1.2.10以后版本支持）；
6. 支持Garmin Vector功率计踩踏相位图形化数据。
7. 支持计算NP，并且NP和平均功率会交替显示。
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
配置说明：
前置步骤：
1. 用Edge设备连接功率计。并且通过传感器 - 信息 - ID取得对应的设备ID（诸如74256）；
2. 自己测量你的LTHR（乳酸阈值心率 Lactate Threshold Heart Rate）；
3. 自己测量你的FTP（阈值功率 Functional Threshold Power）。
--------------------------------------------------------------------------
配置方法：
1. 用Connect手机APP或者Express软件配置参数；
2. 必须输入Power Meter Sensor ID，否则无法取得功率平衡/扭矩效率/踩踏平衡数据！
3. 仅需输入LTHR和FTP值。其他Zone的数值保持为0，才能使此数据字段自动生成各个区间数值！
4. 使用此数据字段，心率和功率区间会自动计算生成并写入到配置参数中；
5. 如果你需要手动精确调整各个区间数值，再次使用Connect手机APP或者Express软件配置参数，此时各区间数值已经填充到参数中，可以根据自己实际需要进行修改。
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
颜色和区间定义：
整体来说，绿色表示合适的竞技区域。你可以在此区域维持1小时持续输出。
如果降到显示蓝色或者近似颜色，意味着你的输出低于预期输出。越浅输出越低。
如果升到黄色，意味着你已经进入无氧区域。通常你只能在此区间持续输出10到20分钟。
如果升到红色，意味着你已经进入极高的区间。通常你只能在此区间持续输出1到5分钟。
--------------------------------------------------------------------------
速度 / 心率HR / 功率Power：
1 - 亮蓝 - 0 to 20km / HR 恢复 / Power 恢复
2 - 浅蓝 - 20 to 30km / HR 耐力 / Power 耐力
3 - 蓝 - 30 to 35km / HR 巡航 / Power 巡航
4 - 绿 - 35 to 40km / HR 4 zone 次阈值区 / Power 阈值区 (CP 20 to 60)
5 - 黄 - 40 to 45km / HR 5a zone 超阈值区 / Power VO2Max (CP 12 to 20)
6 - 紫 - 45 to 50km / HR 5b zone 无氧进攻区 / Power 无氧进攻区 (CP 6 to 12)
7 - 红 - 50km以上 / HR 5c zone 冲刺极值区 / Power 冲刺极值区 (CP 1 to 6)
--------------------------------------------------------------------------
踏频：
浅蓝 - 0 to 50
蓝 - 50 to 80
绿 - 80 to 110
黄 - 110 to 130
红 - 130以上
--------------------------------------------------------------------------
坡度：
浅蓝 - 下坡
绿 - 0% to 5%
黄 - 6% to 10%
粉 - 11% to 15%
红 - Over 15%
（除了颜色，在坡度边框下端，会绘制实际的坡度图形，以更容易辨识）