App Icon

Temps

Descrizione

A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>

Novità

0.19 - removed support fo vivoactive 3 devices, as the Tempe is no longer available to widgets on it.</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

Ulteriori informazioni

Autorizzazioni

Questa app richiede l'accesso a:

  • Dati del sensore (es., ANT+, frequenza cardiaca, bussola)
  • Cronologia frequenza cardiaca, barometro, temperatura e quota
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66i GPSMAP® 66i
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Oregon® 7 Series Oregon® 7 Series
  • Rino® 7 Series Rino® 7 Series
  • vívoactive® HR vívoactive® HR
Valutazione media: (38 valutazioni)

Yarik
9 maggio 2019 | Versione 0.20.1

Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.

John Paul Istre
30 aprile 2019 | Versione 0.20

Does not work on the Forerunner 235, and if it was not created to work on this device, then why would you create this widget to support it?

Risposta sviluppatore
30 aprile 2019, jim_m_58

The 23x doesn't have an internal temperature sensor, but as the description says, you have to have a Tempe for it to work with that, and I guess you don't..

Murray Keogh
2 gennaio 2019 | Versione 0.18

Great widget Jim! Keep up the good work

Dušan Jurkovič
12 dicembre 2018 | Versione 0.18

Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?

Risposta sviluppatore
13 dicembre 2018, jim_m_58

Only the current temperature for the Tempe is displayed. There is no history available for the Tempe.

Christopher Lawley
4 dicembre 2018 | Versione 0.18

Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended

Risposta sviluppatore
4 dicembre 2018, jim_m_58

Which device? The Tempe can take up to a minute to connect, and on some watches, the widget can time out before then if you don't interact with the widget.

Emanuel Chiculita
28 novembre 2018 | Versione 0.18

Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!

barry
30 ottobre 2018 | Versione 0.18

Just what I was looking for. I have just 1 question: WHAT IS THE 0.10 MEAN IN THE Temps 0.10???

Risposta sviluppatore
31 ottobre 2018, jim_m_58

That's the version number of the app.

Alan Formstone
25 ottobre 2018 | Versione 0.18

Excellent. Exactly what i was looking for. Totally 5 stars!

Enrique Del paso
30 giugno 2018 | Versione 0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

Risposta sviluppatore
30 giugno 2018, jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
29 giugno 2018 | Versione 0.17-upd3

Great and simple

jsanchezi
25 giugno 2018 | Versione 0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
1 maggio 2018 | Versione 0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Simon
2 marzo 2018 | Versione 0.17

Top

Jája 🇨🇿
13 febbraio 2018 | Versione 0.17

Shows only Tempe temperature, Internal "Not Available", F3 HR.

Risposta sviluppatore
13 febbraio 2018, jim_m_58

In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)

Natxo Baile
11 febbraio 2018 | Versione 0.16.1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

Risposta sviluppatore
11 febbraio 2018, jim_m_58

The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.

DzoLoMartelet
2 febbraio 2018 | Versione 0.16.1

Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.

Christian
28 gennaio 2018 | Versione 0.16.1

Works beautifully on the Fenix 5X.

Nicole van den Heuvel-Voskuil
24 gennaio 2018 | Versione 0.16.1

I have a vivo active 3 and the tempe sensore bt it won't show the temperate of the tempe sensor. Every thing is connected but it won't show :-( what i am doing wrong?

Risposta sviluppatore
24 gennaio 2018, jim_m_58

Widgets time out very quickly on the va3, and the Tempe can take a minute to connect. Try again, but tap the screen every 15 seconds or so, as that resets the widget timeout.

andrej-svk
12 gennaio 2018 | Versione 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
12 gennaio 2018 | Versione 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
12 gennaio 2018 | Versione 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

Labrie JS 🇨🇦
2 gennaio 2018 | Versione 0.15-upd

Great app, since you can't make the tempe graph, can you show the Alt tempe reading in the last 2-3 hrs. Any thing to have spme king of history. If not can you show the max and low internal and external temperature for the last 24 hrs.

Bernardo1985
6 novembre 2017 | Versione 0.15-upd

Muy buena aplicación. Funciona bien sobre el Garmin Fenix 5X. Como punto a mejorar, realizar una representación del gráfico más visual y legible. Recomiendo

Mark Elbogen
8 ottobre 2017 | Versione 0.15

Great app. One question: is there a way to have a second graph which shows the graph of Tempe temperature as opposed to internal?

Risposta sviluppatore
9 ottobre 2017, jim_m_58

Since the widget only runs for a short time, it really can't collect the info to draw a graph for the Tempe. The internal data is collect by the Fimware, so that's easy to display.

JoseNG2
1 ottobre 2017 | Versione 0.15

Very good widget. Could you create one like this but only with pressure?

Spiacenti, nessuna statistica disponibile al momento.