05 Agustus 2019 | Versi 0.18.1
Awesome! works ok on vivoactive 3! Thank you!
03 Agustus 2019 | Versi 0.18.1
Nice widget. However, it is not possible to calibrate the pressure. Could you please add this feature?
03 Agustus 2019, jim_m_58
That calibration is done in the firmware itself. I just report what the FW says.
26 Juli 2019 | Versi 0.18.1
Why am i negative altitude??
26 Juli 2019, jim_m_58
I simply display what the firmware reports. When was the last time you calibrated the altitude?
25 Juni 2019 | Versi 0.18.1
The app is very good, but how can I change the unit of measuring altitude into meters
26 Juni 2019, jim_m_58
That's based elevation units set on your watch.
Settings,System,Units,Elevation on many devices
27 Mei 2019 | Versi 0.18.1
vivoactive3: it shows wrong direction, (opposite direction...).
27 Mei 2019, jim_m_58
The native heading field will also show what the widget shows if you've switched sides for the button and not calibrated the compass.
The watch is "upside down" unless you calibrate the Compass.
10 Mei 2019 | Versi 0.18.1
This is exactly what I was looking for. In the description it says to calibrate the compass where do I find this option. My compass is backwards.
10 Mei 2019, jim_m_58
You have a va3/m and the instructions are the owners manual. Go to Settings,Sensors&accessories, Compass, Calibrate. Not doing so also impacts things like the heading data field, and isn't specific to this app.
08 Mei 2019 | Versi 0.18.1
23 Februari 2019 | Versi 0.17
forerunner 645 I also have north turned. What with this? several times calibrated.
23 Februari 2019, jim_m_58
I don't see this on a 645M. What FW version are you using? What does the native heading data field show? Please use Contact developer on the right for assistance
17 Februari 2019 | Versi 0.17
Der eingebauter Kompass passt überhaupt nicht!!! Der zeigt genau in die entgegengesetzte Richtung wie ein Handelsüblicher Kompass. Wer weiß wie zuverlässig der Barometer funktioniert!!!
Unbrauchbar und daher deinstalliert!
17 Februari 2019, jim_m_58
If you have a va3, and switched the sides for the button, you must re-calibrate the compass. You'll see the same with the native heading field if you don't re-calibrate the compass.
06 Februari 2019 | Versi 0.17
Would be more useful to have some sort of time-scale for the alt and baro. Otherwise the graph is fairly useless.
06 Februari 2019, jim_m_58
Both graphs are about 160 minutes
19 Desember 2018 | Versi 0.17
Baro shows OK but looks that I am under the ground 93 meters.
19 Desember 2018, jim_m_58
I display what the firmware reports. Start a GPS activity and it should calibrate base on which watch you have.
08 September 2018 | Versi 0.16
Perfect. Simple yet exactly what i wanted.
27 Agustus 2018 | Versi 0.16
Thank you very much. This ABC widget is an excellent choice to my 645.
23 Juli 2018 | Versi 0.16
I love this widget, it's simple and super useful. It works fine (N points north) on my vivomove3 and I keep my button on the left. The only thing that doesn't work: the widget will not advance to the next if I try to use the sensor bar on the side of my watch, it advances to the next widget if I swipe the screen.
21 Juni 2018 | Versi 0.16
Works great for me on vivoactive 3. I would give it 5 stars if the compass would flip directions when you flip the button on the watch to the left on the settings. For now I just have to remember that south is north and east is west.
21 Juni 2018, jim_m_58
I have no control of that. It's a FW problem when the buttons are flipped and you also see it in the FW's "Heading" data field.. I reported it soon after people got the device last fall and let e know. When the firmware gets the fix, the widget should work fine. Until then, keep the button on the right side....
13 Juni 2018 | Versi 0.15
Vivoactive HR - FW 4.40 doesn't solve the baro - graph problem
13 Juni 2018, jim_m_58
Yes. 4.40 has been out for a couple months and doesn't fix it. I reported to garman even before that, and all that can be done is to just wait for a fix. I can't display data I don't have.
07 Mei 2018 | Versi 0.15
the compass is great but the Alt is totally out of wack.
08 Mei 2018, jim_m_58
I just report what the firmware sats for the altitude. Have you calibrated it on your watch? Used GPS within a few hours, etc?
26 April 2018 | Versi 0.15
Useful barometer and altitude additions to the compass. Works well on FR645.
18 April 2018 | Versi 0.15
do you know when the new FW that will allowed the pressure graph to be displaied will be released?
17 Maret 2018 | Versi 0.15
Non viene visualizzato il grafico della pressione barometrica
17 Maret 2018, jim_m_58
If you are using the vahr, there is a bug in the firmware where that information isn't available. Hopefully, the next version of FW will fix that bug.
19 Februari 2018 | Versi 0.15
Good, reliable app!
However, I'm having same problem as mentioned by users befor me. On vivoactive 3, wearing on my left hand and the button on the inside, is showing wrong position of the cardinal points (the other way around).
Please fix this problem!
19 Februari 2018, jim_m_58
It's a FW bug, and the native heading field is the same with the button on the left.
22 Januari 2018 | Versi 0.14
Great app but pressure not good.
22 Januari 2018, jim_m_58
Please use "Contact Developer" to let me know which watch, firmware, etc
05 Januari 2018 | Versi 0.12
Good idea to have all in one screen, but I can suggest two improvements: ability to calibrate barometer (altitude and sea level pressure) by start button and the other one is about displaying pressure not just in Mars, but according to system settings or at list widget additional preference, I prefer mmHG.
03 Januari 2018 | Versi 0.12
Vivoactive HR - Seit dem letzten Update V0.12 vom 26. Dez. 2017 ist die Barometeranzeige (mit Bezug auf Meereshöhe) sehr ungenau geworden!!! Sie zeigte vorher im Vergleich mit dem DWD (Deutschen Wetterdienst) fast um 0,5 hPa genau an. Jetzt sind die Werte nach der Höhen-Kalibrierung um 5 hPa = 500 Pascal viel zu hoch!!!
Aber wie auch schon vorher wird die Höhe nach der Kalibrierung auch jetzt noch nicht genau übernommen. Wenn ich die Höhe auf 105 m einstelle, werden nur 104 m angezeigt! Dieses Problem mit diesem Phönomen scheinen aber mehrere App-Programmierer zu haben!?
04 Januari 2018, jim_m_58
There is a bug in the 4.30 FW for the vahr, where the Baro data that I normally use isn't available, and I'm using a second source on the watch. That also means there won't be a graph for the baro. When the bug in the firmware is fixed (it will be another firmware update), the widget should start working as it should.
30 Desember 2017 | Versi 0.12
it is working again thanks