08 Juni 2020 | Versi 1.9.3
Je n’arrive pas à trouver le champ sur ma Fenix5X.
J’utilise déjà déjà deux camps de données. Est ce que c’est pour cette raison?
11 Juni 2020, Shane.Coetser
Veuillez vous assurer que le champ de données est installé sur votre appareil. Il devrait apparaître sous la liste "Installé" dans les paramètres de l'appareil sur votre téléphone. Sur votre montre, ce sera sous les champs ConnectIQ.
29 Mei 2020 | Versi 1.9.3
I have an old Elite Super Crono Fluid, i've seletcted Qubo Fluid ad i have 9% lower vPower vs the official Elite My E-training App (ex. 112W vs 122W). But i like it!
20 Mei 2020 | Versi 1.9.3
I can't change the tire rolling resistence coefficient. The field expects a long while the value is a decimal. Entering numbers doesn't work, neither does copy/paste.
20 Mei 2020, Shane.Coetser
I just re-installed the application to simulate your issue. After installation I was able to change the value in the settings page on my iOS device. Can you confirm that you have a proper install and what phone you are using?
03 Mei 2020 | Versi 1.9.3
Just downloaded this yesterday and went for a short indoor spin today. I don’t have a power meter but the spin class I go to does and I have a decent idea of the kind of numbers I’m cranking. I’d say this tracks nicely and is maybe within 10% accuracy.
Of course, trainer selection is crucial. I’m using rollers and selected the Peak Performance Omnium as the base and tweaked my bike weight upwards 50% from actual since my rollers have 1 more roller (3) vs the Omnium’s 2.
I’ll probably have more to say after a couple more months with this.
29 Februari 2020 | Versi 1.9.2
Tocino & velocidad..
12 November 2019 | Versi 1.9.2
Very good data field. Can you please get the Elite Crono Fluid added? I have the following Speed and Virtual Power rating from Elite. Speed(KMH) Power 10,35 20,88 30,190 40,325 50,505
06 September 2019 | Versi 1.9.2
I am getting very low power readings when going uphill (3-10%). I expect 150-180W based on Strava readings, but I am getting 10W or less. It looks like (bike+rider) weight (or grade) are being ignored altogether. I am using an Edge 520 plus (has barometer, not sure it uses it), and I have speed and cadence sensors.
Any ideas? Could it be that it does not work if I am using feet/miles/pounds instead of metric units?
11 Juli 2019 | Versi 1.9.1
great app, it would be perfect if the watt data from the app can generate an estimated IF or can be integrated in garmin connect like for who has a power meter. these data will complete the statistic graphs with a lot of useful data!
14 Juni 2019 | Versi 1.9.1
Hey Shane, keep up the good job! Excellent app you have developed!!! All the best, Mike
08 Juni 2019 | Versi 1.9.1
Sometimes data is erratic, and spiky a lot. I did'nt understand the reason, better the developer make a simpler version, calculating using the weight, speed, slope real-time.
07 Mei 2019 | Versi 1.9.1
Nice app: it let’s me know instantly about my power and stores them in the Garmin Connect that I can analyze later!! It may be not perfect but it solves all my necessities!! Good job!!
14 April 2019 | Versi 1.9.1
I had a lot of expectations, but it looks as if the (default) settings are incorrect. I have peaks of more than 1900W and a average of almost 400W. My FTP is not even 200W, so this is far from realistic. Is there something with the (default) settings that needs to be adjusted to get more realistic values?
Because I still hope it will work, I will rate it as "OK", but for now it does not work.
09 April 2019 | Versi 1.9.1
Great app..So..only a question...it's necessary imposted FTP value on device ?(Garmin Edge 520)..
29 Januari 2019 | Versi 1.9-upd3
Great app. i want to know if there is a chance to get the 20m value too.
23 Oktober 2018 | Versi 1.9-upd3
Best estimated power, is there a way to print on garmin connect best 20 min power??
13 Oktober 2018 | Versi 1.9-upd3
resultats correct jusqu a la derniere mise a jour. depuis en montée resultats tres bas et proche de zero. que se passe t il?
Jose Moreno 🇪🇸🇮🇨
08 Oktober 2018 | Versi 1.9-upd3
This application is useless.
26 Agustus 2018 | Versi 1.9-upd3
I thought at least this will be a good "live" estimate, especially going uphill but there must be some serious problems with the maths involved (or how data is provided by garmin). I would have liked the numbers displayed but strumbling around with 300 W on a recovery ride, pretty unrealistic...
I have a feeling that aerodynamic drag/rolling resistance is massively overestimated in standard configuration, e.g. going a bit downhill with no preassure on the pedals generated watt numbers around 250 W
To summarize: Better display hm/h and the gradient on your garmin to give you a feeling on how hard you are pressing the pedals, or get a powermeter...
22 Agustus 2018 | Versi 1.9-upd3
there ara some strange peaks on descents
11 Juli 2018 | Versi 1.9-upd3
app doesn't work on climb or anytime that the gradient change...on climb goes to zero on descent calculate too much watt...works better till some months ago...but now unuseful
07 Mei 2018 | Versi 1.9-upd
Warning MTB fans, this app is based on speed, so for guys like me, is not useful, I had a power of 280 watts descending and 15 watts in a steep climbing. No make sense for MTB.
Is clear that the programmer did an excellent job for other kind of bikes,Road, Triathlon etc.
05 Mei 2018 | Versi 1.9-upd
pas de resultats coherents sur fenix 3hr ,meme au dessus de 40 TOURS MINUTES RESTE A 0
17 April 2018 | Versi 1.9-upd
I use this with a fixed gear bike and Garmin 520. It seems like the app doesn't recognize the grade of hills: going uphill (low cadence, slower speed) I get pretty low power estimates. Going downhill (sometimes 140+ cadence and 30+ mph) vPower is 450w+. That's the opposite of the power meter readings on my other bike. The app seems pretty accurate on flats and low grades. Any thoughts?
13 April 2018 | Versi 1.9
Thanks for a great app, great service from developer. Data very accurate. Thanks.!!
01 April 2018 | Versi 1.8.3
Works just perfekt. Very nice app. Thanks!