App Icon

Xert Workout Player

Deskripsi

Discover, Improve, Perform with Xert Breakthrough Training - Two Time Winner Best Connect IQ App Award!</p><p></p><p>The Xert Workout Player offers athletes the most advanced workout capabilities available on the market today. Xert's SMART workouts are the only system calculated, dynamically adjusting workouts. The system and players can determine your unique interval targets based on your fitness as of today and can also adjust across a variety of dimensions such as target power and interval duration *as you perform the workout* to improve the overall training you receive. Paired with Garmin Connect Mobile, the Xert Player logs in to Xert Online (www.xertonline.com), obtains your latest Fitness Signature, downloads your selected workout, configures the exact workout interval intensities and durations specific to you and then plays the workout using your power meter and/or smart trainer. With your smart trainer, it will do trainer control. If you have both a power meter and smart trainer, it will do powermatch and trainer calibration on-the-fly. The app also sends telemetry back to Xert Online so you can view your data online via the Xert Remote Player (https://www.xertonline.com/remote) and follow your workout progress. </p>

Yang Baru

Version 3.3 brings exciting new features that enable greater variety in your workouts including ramps, slope-mode (mixed-mode) and smart, dynamic power intervals based on target MPA that adjust their target power based on your fatigue at the moment. </p><p>Version 3.5 Workaround that addresses 3rd Party ConnectIQ datafields with Background Service conflicts.</p><p>Version 3.6 Improves access to more workouts using more Garmin Edge devices.

Informasi Tambahan

Izin

Aplikasi ini memerlukan akses ke:

  • Kirim/terima data lewat ANT Radio ke/dari sensor pihak ketiga
  • Kirim/terima informasi ke/dari internet
  • File FIT (rekaman aktivitas)
  • Catat informasi tambahan ke file aktivitas
  • Lokasi GPS
  • Data sensor (contoh, ANT+, detak jantung, kompas)
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Peringkat Rata-rata: (51 Peringkat)

Todd Manley
15 September 2021 | Versi 3.6

Did a SMART workout tonight and liked how it function but I'd make improvements to make it easier to read on the Garmin 830 layout. Data fields were very small. Biggest concern was that after my workout was done and saved, I had to reconnect my sensors (both for the Assioma power meter pedals and my Wahoo HR monitor). Not sure why this happened?!?

Balasan Pengembang
16 September 2021, Xert-BaronBiosystems

Thanks Todd. There is an oustandng firmware issue with the x30 series units that will cause sensor disconnections in any CIQ app that's running when a text message, call or other event on the unit is received. We're working with Garmin to get that resolved but you may want to submit the issue to Garmin support too to help expedite a fix for it. In the meantime, you can try changing the Activity Profile before entering our app (WORKOUT to RACE, for example) and ensure the Activity Profile has no customizations.

Lok Chai
14 September 2021 | Versi 3.6

Best workout companion. Something to distract me during LSD outside.

Randall Galisky
01 Agustus 2021 | Versi 3.6

Used for the first time today on an Outside ride - very cool. The App functions as intended - kudos to the developers!. My complaint is the graphics are too small (Garmin 1030) for me to see in a glance so it takes my focus off the road, traffic, other cyclists etc... to focus on the small print/graphics on the screen. Adding a second screen that just has big numbers that change color would easily work. (Blue Under target range , green target range, red over target range) Fields to Display: MPA Power Target Pwr,, Time remaining Work out Time, Timer Stage ()i.e. 4/36)

James Arthur
21 Mei 2021 | Versi 3.3

I run both this and the Android version on occasion. I use this version mostly for outdoor intervals. I'd like to see both the target and length of the upcoming interval displayed on the screen somewhere since its hard to focus on the screen for short intervals when out on the road.

David Higgins
12 April 2021 | Versi 3.3

Randomly disables sensors in the 1030 (go check your sensors). When playing via the Garmin 1030 indoors on a Wahoo Core - the app simply cannot keep up (ERG mode) with it's own workout power levels.

Balasan Pengembang
13 Juli 2021, Xert-BaronBiosystems

Hi David. We just posted and update (3.5) that does some code ninja to handle the conflicting Connect IQ datafields. Can you check it out and let us know if the problem persists? Thanks.

Simon Pugh
05 Februari 2021 | Versi 3.3

I think the app as designed by Xert is very good and will support doing outdoor sessions very well if you have a power meter, although for indoors sessions ai find the mobile app version running on phone or iPad much better. I have two bugbears with the Connect IG version on my Edge 1030: 1. While in a workout the app takes complete control of my Edge meaning I cannot swipe to another screen - eg to check if BLTE is on etc or use the power button to lock the screen 2. After the workout all my sensors are disabled and so I have to go into every one and re-enable them ready for my next use of the Edge. Conclusion: the integration of this well-designed app into the Garmin environment could do with some improvement.

Balasan Pengembang
05 Februari 2021, Xert-BaronBiosystems

Hi Simon. Connect IQ apps are by design apps that take over the unit. It's not like an Android or iPhone where you can run multiple apps at the same time. The issue with ending an app and have all the sensors disabled is an issue with the system firmware that we hope to see Garmin address in a future firmware release. The ConnectIQ system does not allow apps to enable or disable Garmin sensors you have configured.

Daniel Wiebke
19 Januari 2021 | Versi 3.3

This app crashes every now and then, very ugly interface, extraordinary bad handling. Just like the mobile app this is a very poor app but you have to use either the mobile app or this one to sync your trainer with Xert. This is real garbage.

Balasan Pengembang
19 Januari 2021, Xert-BaronBiosystems

Hey Daniel. Reach out to [email protected] for help with this. Other ConnectIQ datafields can cause this to happen unfortunately. It's a problem with the underlying handling of background services that our app doesn't control unfortunately. There are solutions we can help you with though.

Robert Corry
23 Desember 2020 | Versi 3.3

I installed the App on an Edge 1030 Plus. Couldn’t initiate the App, kept getting an Unknown Error when Authorising it. Contacted Support, they were very helpful, they advised to try logging in with WiFi disabled on the Edge. The App then logged in correctly. Haven’t tried using it yet, wanted to post the above for the benefit of others trying to get the App installed.

Bart Bloomquist
26 Juni 2020 | Versi 3.2

How come its not available for the Edge 1030 plus?

Balasan Pengembang
13 Juli 2021, Xert-BaronBiosystems

Latest version should support the 1030 plus. Thanks.

Yiannis
26 Juni 2020 | Versi 3.2

Flawless for me on my 530. Indoors use. This a very high quality, feature packed app in par with the built in Garmin software. Beautiful, functional, useful, can even do powermatch and broadcast to the remote player! I can now free my phone and get rid of the ant+ dongles. Nice touch, it adds extra information on the fit file that goes to garmin connect. Excellent!

Alexander Liffers
20 Juni 2020 | Versi 3.2

The player works a treat, although I always struggle to keep the power in the green zone while cycling outdoors, but hey I'm new to this. The problem, however, is after using the workout player, the next time I turn on 530 to just use the normal built-in activities I find that all the sensors I have registered are disabled and I need to individually enable them all again. Not just power/speed/hrm, but all the others like lights. Somewhat related, is Xert at looking to integrate with Garmins workout API to push workouts that way, rather than a dedicated app, or possibly making the workout player a field? At least for users that are using it outdoors and don't need it to control trainers.

Alessandro Busetto
02 Mei 2020 | Versi 3.1

Hi, I have installed version 3.1 on a Garmin Edge 820 and there are various issues. 1. Cannot access the app menu 2. Cannot exit the app once opened 3. App freezes when discarding an activity Pairing with trainer is ok, but given the above issues the app is unsable. Please help! Thank you

Balasan Pengembang
02 Mei 2020, Xert-BaronBiosystems

Hi, Kindly send support requests to our support group: [email protected] Thank you.

Michał Szaliński
28 Maret 2020 | Versi 2.08

All is good and really improvig, however it does not save GPS data when doing workout outdoors. Garmin Edge 530

Balasan Pengembang
06 April 2020, Xert-BaronBiosystems

You can enable GPS in the app!

runnerXXX
07 Maret 2020 | Versi 2.08

I installed it and set as instructed, but when I went to discard workout, Edge 1030 froze on on this page and nothing else helped, than holding power button to perform hard reset. This happened 4 out 5 cases when. Set up for powermatch with pedals as instructed. I dont have any other installed apps and no datafield, that could cause conflict

Graham Turner
04 Maret 2020 | Versi 2.08

Installed and signed up but after authentication and returning to device there is just a small error picture and so doesn't work, not sure what's going wrong.

Balasan Pengembang
05 Maret 2020, Xert-BaronBiosystems

Hi Graham. You can try and disable wifi. There are known issues with Garmin devices. If that doesn't work, get help with our support team at [email protected]

Mårten Larsson
06 Januari 2020 | Versi 2.08

Great app EXCEPT Evert other time I try to start the app on my Edge 1030 the app refuses to login. Most of the time it works after a reboot but sometimes it takes 10-15 minutes just to get going.

Balasan Pengembang
06 Januari 2020, Xert-BaronBiosystems

The app relies on connectivity to the Xert server through your Garmin Connect Mobile interface. If the Garmin isn't connected to Garmin Connect Mobile, the app is not able to login. Ensure your Garmin is connected to Garmin Connect Mobile and your phone is connected to the Internet prior to starting the app. It will work 100% of the time if there is proper communication to the server.

CardioJunky
02 Januari 2020 | Versi 2.08

Excellent, there is a learning curve in to it but it is wonderful app once you figure it out.

Mohammad Faisal Bin Abdul Ghani
11 November 2019 | Versi 2.08

Love it!

JESUSPGO
31 Oktober 2019 | Versi 2.08

Tengo continuas desconexiones con el teléfono desde mi edge 520 plus cuando quiero usar el remote player en el pc. He probado a reinstalar la aplicación y connect mobile pero sigue igual.

Balasan Pengembang
06 Januari 2020, Xert-BaronBiosystems

You should remove all datafields (except for Xert datafields) on your Garmin since some interfere with running apps.

Henry Tambor
28 September 2019 | Versi 2.08

The Xert workout player is innovative software. There is a learning curve to the Xert approach to power metrics, so don't expect to use this software intuitively. Spend some time getting to know their system and you will find that this is great software.

Lok Chai
26 Agustus 2019 | Versi 2.08

Xert is adaptive. Just follow the Advisor whenever you want to workout. This app is great for indoor and outdoor rides. The premium monthly plan is 9.99 so... just cost you a few beers to try and you get the added benefits of weight loss.

Steven
25 Juli 2019 | Versi 2.08

Top! Just invest some time to figure out Xert.

dimitu
02 Juli 2019 | Versi 2.08

...geht überhaupt nicht, lässt sich nicht synchronisieren, immer dieser Ärger mit den unvollkommenen Apps :(

Balasan Pengembang
02 Juli 2019, Xert-BaronBiosystems

It works perfectly when configured properly. Contact support and we can help you.

DONNAY Jean Francois
21 Februari 2019 | Versi 2.07

Well’really great, when Work , (1 Time by month )

Balasan Pengembang
21 Februari 2019, Xert-BaronBiosystems

Hi Jean Francois. Contact support at email address [email protected] for help in using the software. It works every time when you follow the correct steps. Thank you.

DONNAY Jean Francois
29 Januari 2019 | Versi 2.05

Really great but....why so small characters? impossible to read on the bike. What a pity :-(

  • 1 dari 2

Maaf, statistik belum tersedia.