Jose Salvador
22 September 2018
Muy práctica y vistosa. A mí me encanta y tienes toda la información útil de un vistazo.Me encanta.
GAUTHIER
22 September 2018
Superbe interface, plusieurs possibilités pour paramétrer la montre.
Petite question, peut on laisser les secondes en permanence ?
Balasan Pengembang
22 September 2018, HermoT
Permanent seconds unfortunately are only supported on the newer generation of devices released since (and including) the Fenix 5 series. Anything before the F5 does not have the appropriate hardware to support it. This is by design on Garmin’s side and third party developers cannot do anything regarding that.
Richard Baker
21 September 2018
Fantastic watch face. This is the best one I have seen on the market. The layout is exactly what I would want and the customization capabilities really make it perfect.
Thanks for putting out such an awesome face.
Balasan Pengembang
21 September 2018, HermoT
You’re welcome! Thanks for the kind review!
Dave Roberts
20 September 2018
great watchface - very pleased however cant seem to access the settings for the watchface as per the video on my app?
Balasan Pengembang
20 September 2018, HermoT
Please email me through the “Contact Developer” and I’ll assist.
Ami Haberer
18 September 2018
Wow, This is by far the best watch face and it works perfectly on my 235 model.
Thanks for all of your hard work!!
One great addition might be to enable the move bar to be placed on the left side (like in default 235 face).
Balasan Pengembang
18 September 2018, HermoT
Thanks for your kind review, Ami. I will log your suggestion in my backlog for future consideration and evaluation.
Michelle
16 September 2018
This is by far the best watch face available!! Love it thank you.
Balasan Pengembang
17 September 2018, HermoT
You're welcome, enjoy it!
Rahan
16 September 2018
Rien à rajouter.
Attention les secondes s'affichent puis disparaissent souvent.
Vivoctive HR
Balasan Pengembang
16 September 2018, HermoT
There is nothing wrong and this is by design: the vivoactive HR is not capable to display seconds permanently (often referred to as always-on seconds) This is a hardware limitation, and therefor it can only be displayed in high power mode (when you lift your wrist up towards your face). It displays for 10 seconds before entering low power mode and then disappear.
Jon Pelfrey
15 September 2018
I come back to this watch face often. Looks great with the new anti-aliasing. Keep up the good work!
Balasan Pengembang
16 September 2018, HermoT
Glad you like it!!
Marie White
15 September 2018
Great face. Would have liked to see calories on there somewhere. Too much step counting for me.
Balasan Pengembang
15 September 2018, HermoT
Did you know you can configure NoFrills to show you exactly that? Please always read an app’s description before doing a review. ;-)
Lola
14 September 2018
Diseño genial pero hace que el reloj vaya más despacio al cambiar de pantalla.
Balasan Pengembang
14 September 2018, HermoT
NoFrills is actually one of a few better performing watch faces. The more complex the face, the slower the watch. Unfortunately you will find this to be a bigger problem in other complex watch faces. Try it out. Newer and faster devices are better suited to handle Connect IQ apps and transitioning is much smoother on the newer devices.
Wai
14 September 2018
My MK1 can't display traditional Chinese, just view garbled. Pls, try to solve this problem... Ths.
Balasan Pengembang
14 September 2018, HermoT
There is a known bug in the Descent firmware. It’s already been reported to the device team at Garmin. Unfortunately there is nothing more we as third party developers can do about this.
Shane
12 September 2018
This is by far the best watch face around, I recently reset my watch to factory setting due to an issue I had but since I reinstalled the watch face my steps and heart rate are not in real time and want to know if this is just my imagination or is there a setting I'm missing
Balasan Pengembang
13 September 2018, HermoT
Please contact me through the proper channels. The reviews is not intended for seeking support as there is no way I can follow up with you except for this reply. Please look in the app description for the Contact developer link, or use the other channels I added in the description.
Bob
12 September 2018
The best watch face. Love the simplicity and options. Been using it for a while. Thanks for fixing the steps miles to only display walking miles.
Balasan Pengembang
12 September 2018, HermoT
Thanks for your kind review. Actually I didn’t fix anything. As a third party developer I only report on the display what the firmware provides. This is something that Garmin changed in recent firmware upgrades. Not everybody like this change and some prefer the previous formula for the distance.
Just some useless information from me :)
Eric Simmons
09 September 2018
Love your watch face! Thanks for all the hard work that went into this. It’s my go to view for my vivoactive 3. If your looking for a new watch face then look no further and give this one a try. SO many ways to customize it to your liking and make it your own.
Balasan Pengembang
09 September 2018, HermoT
Thanks for the nice review, Eric, and enjoy your watch!!
Kaskurkada
08 September 2018
Would be really nice having an option to disable antialiasing... Would you see a problem for user to have a choice? I can’t get used to blurry numbers (clock).
Balasan Pengembang
10 September 2018, HermoT
Contact me through email. I need to see a sample of what you mean by “blurry”. The antialiased font for the clock is just as crisp and clear. All other numbers for displaying data uses the built-in Garmin fonts.
Robert Palmer
08 September 2018
This is the best face I've tried so far. Clean, simple and easy to read.
As a request, it would be nice to be able to add more data points. I have steps / distance set under the time. Would be nice to have option of adding floors climbed somewhere on the display in addition. Also possibly altitude and temperature.
Balasan Pengembang
08 September 2018, HermoT
NoFrills prides itself on great performance (fast with low battery consumption) and low memory usage across the full spectrum of Garmin CIQ compatible wearables. The decision to not add any further elements is based on both the aim to keep up its great performance as well as keeping the display clutter free with enough space to show the rest of the elements in a bigger font for easier readability.
Marlon Meese
06 September 2018
*Beim Datumsformat Wed, 31. Jan das Jahr hinzufügen: Wed, 31. Jan 2018
*Sekündliche Messung der Herzfrequenz
*Farbiges Herzsymbol:
-Dunkelgrün für eine sehr gute HR
-Grün für eine gute HR
-Gelb für eine schlechtere HR
-Orange für eine noch schlechtere HR
-Rot für eine sehr schlechtere HR
-Dunkelrot für eine sehr sehr schlechtere HR
- Strich & eine 0 für kein Pulsschlag
Balasan Pengembang
08 September 2018, HermoT
Unfortunately the year will make the date string too long and will be clipped on the edges. I have evaluated this in the past, but there just isn’t enough room for it.
Interesting request regarding heart rate. Unfortunately the per-second drawing of the heart icon in a different color won’t fit within Garmin’s allowed power budget that apps have to adhere to. This is in order to conserve battery power.
Watch Face 
