Display various type of barcodes (Simple barcode or 2D barcodes like QR code or Aztec code)</p><p>--</p><p>Please see instruction here : https://github.com/macherel/Barcode-Wallet/wiki/Getting-started</p><p>--</p><p>You can use this app for storing loyalty cards, parkrun ID, COVID Certificate, vCard and much more</p><p>It can display most of the EU Digital COVID Certificates (Green pass), but it can fail to display for few users. Please contact me if this occurs.</p>
2.0.0</p><p> - Many changes to make the app compile with the latest SDK</p><p> - Add support for edge540, edge840, edgeexplore2, fr265, fr265s, fr965, gpsmap67, instinct2x, instinctcrossover, marq2, marq2aviator, venusq2, venusq2m</p><p>1.8.8</p><p> - add support of edge1040, forerunner 255 and 955</p><p> - change default value for displaying labels</p><p>1.8.7</p><p> - fix bugs</p><p>1.8.6</p><p> - add support of D2™ Mach 1 and Descent™ G1</p>
Aplikasi ini memerlukan akses ke:
Игорь
12 Maret 2022 |
Versi 1.8.5
Meister CCIE
9 Maret 2022 |
Versi 1.8.5
Bruno did a great job with this piece of software: I was able to include - my Covid certificate - a whole bunch of concert tickets with different code types into my Venu2 plus watch. Sometimes the scanner inside the App did not get all the barcodes, but using for example QR code Reader on my Android phone I was able to read the QR code and copy/paste the alphanumeric value of the QR code into the Barcode Wallet app. I tested especially the Covid QR code: The displayed QR code in my watch was corretlcy displayed and is readable, eventhough the watch only has a very small display! - Great!
Mariusz Stolarzewicz
28 Februari 2022 |
Versi 1.8.5
Jérôme TOARD
27 Februari 2022 |
Versi 1.8.4
Ne fonctionne que 7 jours sinon il faut payer...je préfère allez faire des widgets gratuits et tout aussi efficace. Only works for 7 days otherwise you have to pay...I prefer to go make free widgets and just as effective.
Balasan Pengembang
28 Februari 2022,
macherel
L'application continue de fonctionner après 7 jours, seule la synchronisation est bloqué et il faut créer un nouveau jeton pour modifier les codes déjà synchronisés. (ou effectivement faire un don pour soutenir mon travail et supprimer la limite de temps) -------- The application continues to work after 7 days, only synchronization is blocked and a new token must be created to modify the codes already synchronized. (or actually donate to support my work and remove the time limit)
Cortie
26 Februari 2022 |
Versi 1.8.4
I cannot get past the get started qr code screen. I have done all steps to get my qr code saved and my key but (and this is likely user error) I don't know how to get past the start screen on my watch.
Filippo
18 Februari 2022 |
Versi 1.8.4
On instict 2 it is showed bad, it goes 'under' the circle in the upper right part of the screen and it s partially covered. It should be a simple aspect to correct, just show the qr code a little bit below and it should be ok!
Clif
16 Februari 2022 |
Versi 1.8.4
Sébastien
15 Februari 2022 |
Versi 1.8.4
Marco Fantoni
4 Februari 2022 |
Versi 1.8.3
Mario
4 Februari 2022 |
Versi 1.8.3
E possibile inserire sullo smartwhatch il grenn pass ?
Balasan Pengembang
5 Februari 2022,
macherel
Yes, it is ! Do you have installed the app and follow instructions : https://github.com/macherel/Barcode-Wallet/wiki/Getting-started ? Next time, if you only have a question to ask, please prefer use sending an email by using the "contact developer" link -------- Sì ! Hai installato l'app e segui le istruzioni: https://github.com/macherel/Barcode-Wallet/wiki/Getting-started? La prossima volta, se hai solo una domanda da porre, preferisci inviare un'e-mail utilizzando il link "contatta lo sviluppatore".
Jürgen Kurrle
1 Februari 2022 |
Versi 1.8.3
der QR- Code wird nur angezeigt, wenn das Smartphone in Reichweite ist. Ohne Smartphone ist die App leider nutzlos.
Balasan Pengembang
1 Februari 2022,
macherel
I assume you have enabled the debug mode. This mode is only there to provide details on the synchronization which cannot work if you don't have your phone nearby. I imagine that by disabling the debug mode that you put, you will no longer have an error. -------- Ich nehme an, Sie haben den Debug-Modus aktiviert. Dieser Modus dient nur dazu, Details zur Synchronisierung bereitzustellen, die nicht funktionieren kann, wenn Sie Ihr Telefon nicht in der Nähe haben. Ich stelle mir vor, dass Sie durch Deaktivieren des von Ihnen eingestellten Debug-Modus keinen Fehler mehr haben.
Thomas P
31 Januari 2022 |
Versi 1.8.3
bonjour, je n'arrive pas à installer le qr code
Balasan Pengembang
31 Januari 2022,
macherel
Pour des demandes de support, le mieux est de me contacter par mail en utilisant le bouton "contacter le dévelopeur". C'est difficile de t'aider avec le peu d'information que tu donnes. As tu suivi les instructions : https://github.com/macherel/Barcode-Wallet/wiki/Getting-started ?
Craig Boyle
30 Januari 2022 |
Versi 1.8.3
Jost Kosak
30 Januari 2022 |
Versi 1.8.3
This is freaking awesome. It works, setup is simple. Good job, mate.
Bruno Van Doren
29 Januari 2022 |
Versi 1.8.3
QR code is to small for correct scanning on Forerunner 55. Is IT possible tot make it bigger?
Balasan Pengembang
30 Januari 2022,
macherel
I know it can happen with some large QR code on some device. You can long press the "up" button (or long press the screen on some touche screen watch) to zoom the QR code. It hope the result will not be too large. Please write me by email using the "contact developer" link for better support.
Stefano
28 Januari 2022 |
Versi 1.8.3
Great app, very simple to use! Communication with developer also gets 5 stars, he was readily available to help me with my problem.
Tony
27 Januari 2022 |
Versi 1.8.3
Applicazione fatta bene, semplice da usare e funzionante su Fenix 6 Shapire
Balasan Pengembang
29 Januari 2022,
macherel
Thank you for your feedback! I do my best to make a great app. Do not hesitate to contact me by email to let me know of any ideas for improvement. -------- Grazie per il tuo feedback! Faccio del mio meglio per creare un'app fantastica. Non esitate a contattarmi via e-mail per farmi sapere eventuali idee di miglioramento.
Andrew Morris
27 Januari 2022 |
Versi 1.8.3
Ben
25 Januari 2022 |
Versi 1.8.3
ozboss (Oli)
25 Januari 2022 |
Versi 1.8.3
I love this app. Prime I use it for green pass and its works great. Thx for your work
Willy DeWien 🏃🏼♂️💨
24 Januari 2022 |
Versi 1.8.3
Hi, the app works perfect for the COVID „Green Pass“ in Austria with my Forerunner 945.
Rupert
23 Januari 2022 |
Versi 1.8.3
The barcode is bigger on my fenix6 than some other apps and so pleased with it. Worth buying developer a beer!
Cindy
23 Januari 2022 |
Versi 1.8.3
Bonjour Je n'arrive pas à l'installer sur ma vivoactive 3 musique. Comment faire ?
Balasan Pengembang
23 Januari 2022,
macherel
Il semblerait que certains utilisateurs aient du mal a installer des applications sur leur montre. C'est souvent résolu en redémarrant la montre. Afin de pouvoir échanger plus facilement, le mieux pour obtenir de l'aide est de m'envoyer un mail en utilisant le lien "contacter le dévelppeur" accessible sur la page d'accueil de l'application.
Tomáš Šišma
21 Januari 2022 |
Versi 1.8.3
Very good app. I use this for Covid pass, some shopping cards. So useful app and easy to use. Thank you
MaxBrown
21 Januari 2022 |
Versi 1.8.3
After Dial the photocamera picture it appears a empty screen without possibility to take a picture. I'm not able to upload qrcode...
Balasan Pengembang
22 Januari 2022,
macherel
This occurs if your browser don't have permission to access your camera. you can test it on https://webcamtests.com/ Please note that the camera option is a way to easily copy an existing QR code but you can also use an external QR code reader and manually copy the value in the "value" field. Please contact by email (using the "contact developer" link) if you need more informations.