POWER BIKE WIND is a Zones Based Data Field for Running, Treking, Hiking and XC Sky with Estimated Power Calculations with an 20 variable algorithm making an equivalent calores form cycling to running using GPS, Cadence and Speed Sensor, Wind speed and Air Density, Terrain type and Air Drag Coefficients, With 10% Margin Error tested with a Garmin Vector, compatible with Strava, WKO5, Training Peaks and Golden Cheetah, for extended info visit web site https://sites.google.com/view/powerbikepro/home</p>
1.0.0 Initial Release</p><p>1.2.0 Expert Configurations Settings Add</p><p>1.3.5 Display modes add</p><p>2.1.4 Zones Add</p><p>2.2.6 Normalized Power Add</p><p>2.3.5 SDK 3.1.9 update</p><p>2.4.8 Dial Color Zones Display</p><p>2.7.3 Vo2Max Add</p><p>2.8.3 VI, IF, TSS Add</p><p>2.9.0 Power Calculations with wind on 3.2 devices Add</p><p>3.6.0 Kilojoules Calculations on Screen an GC</p><p>3.7.3 WKO5 Compatible.</p>
Az alkalmazás hozzáférést kér a következőhöz:
Piotr Piechaczyk
2022. március 19. | Verziószám: 4.5.6
super aplikacja dla tych co nie mają miernika mocy.brawo dobra robota.!!!! popieram też opinie Karl Sternau
Karl Sternau
2022. március 3. | Verziószám: 4.1.0
Absolutely perfect !!! But can you provide a second version of this field (like your other fields), for different bikes? I prefered define the parameters with numbers like this field... Great Work Peter
Alessandro
2021. november 13. | Verziószám: 3.9.7
to improve the detection of power in the downhill sections. Even if I pedal and push on the pedals, the power remains at zero watts Excellent graphics
Cesar Gonzalez 🇻🇪
2021. október 13. | Verziószám: 3.9.6
This app does not work correctly on my Edge 520 So do I have to use another app?
ABILLEREY
2021. október 9. | Verziószám: 3.9.6
This data field is great. I will give 5 stars when it will be possible to have the display option with only « A Power ».
Meurisse Bertrand
2021. augusztus 31. | Verziószám: 3.8.8
Hi, I would like to thank you for this wonderful data field. I have had an issue with it for a few days. The data field worked perfectly but now it just shows the Connect Iq Logo on my screen (Edge 530). I have no other data field installed and have tried turning off and on the device. Can you help me ? Thank you very much.
Dra Katy
2021. június 19. | Verziószám: 3.7.3
Massimo
2021. május 14. | Verziószám: 3.5.3
I can't configure it. When I try to enter coefficients from air drag and rolling resistance it doesn't accept the coma (,). It says the number isn't a valid entry (out of range). If I try to use the point (.) keyboard press isn't registered and I can't enter the point at all
Francisco Torres < Tarex >
2021. március 22. | Verziószám: 3.5.1
I have problems with the data field, when I start the activity at the same time I get the Connect IQ logo and it does not show the data at the end of the activity
Carsten cmndrb
2021. március 12. | Verziószám: 3.5.1
Top, App zeigt viele verschiedene Werte an. Mir fehlt lediglich eine genaue Dokumentation der verschiedenen Werte und Einstellungen, ist es möglich , die irgendwo zu downloaden?
Даниил
2021. március 3. | Verziószám: 3.4.9
записывает только график, статистику не подводит
A fejlesztő válasza
2021. március 3., xuxumatu
Sorry for the inconvenience, on fenix3 this is a garmin issue has not been solved, many developers are hoping garmin fix this in the future. https://forums.garmin.com/developer/connect-iq/f/discussion/3913/fit-contributor-datafield-not-working-on-fenix3
ManuS5
2021. február 19. | Verziószám: 3.4.8
The app works very well, data are very accurate related a true PM.. If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation! for instance, instead of C Power A, just Power and Avg. Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen? I'm looking for a mode 2 without colors
ManuS5
2021. január 20. | Verziószám: 3.3.1
The app works very well, data are very accurate related a true PM.. If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation! for instance, instead of C Power A, just Power and Avg. Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen?
Felipe Castañeda
2020. augusztus 20. | Verziószám: 2.6.9
Tengo una pregunta, en garmin conect después de terminar de entrenar cuando tomo vueltas con el garmin en una subida o algo me aparecen campos de potencia de power bike pro vacíos, ¿como puedo hacer para que salgan los datos de potencia de cada vuelta? de resto perfecta
A fejlesztő válasza
2020. augusztus 20., xuxumatu
A ver si entiendo: terminas de entrenar y pones stop y salvas entrenamiento y luego reinicias un nuevo entrenamiento y sale vacío? manda un correo a [email protected]
François-Nicolas
2020. augusztus 11. | Verziószám: 2.5.8
I truly enjoy this datafield, was searching for such fantastic feature! However, I don't understand how I can select the particular computed value I want to display as datafield. How can I choose to only display "Average Power" ? To make it more refined, would you consider : 1 - Synchronise the changes / look & feel of all your "PowerBike" datafields? 2 - Make the parameter both definable via presets (such as VéloTopsEndurance) and manual value (using the links you provide, such as Air Drag Coefficient)? 3 - Add Michelin tyres rolling resistance? 4 - Use live ambient temperature from the integrated sensor (avoiding the hassle to manualy define it before each ride)? 5 - Take decimals in account for Bike weight? 6 - Take tires pressures in account?
bertazzon
2020. augusztus 1. | Verziószám: 2.5.5
Hi, why limit it to 20 kg. This prevent the use with the most of e-bikes. Hope you widen this range.
James Shanahan
2020. július 30. | Verziószám: 2.5.2
This App worked great a few days ago. However went for a cycle today and the average watt over the cycle was "1"..? Can this be fixed please..? Once fixed I will update the review as I believe it works.
Markus W
2020. július 28. | Verziószám: 2.5.1
Just installed and looks fine, but got the same problem as already noted by Marcus, 7.July 2020. The field for 'Rolling Resistance Coefficient' accepts no other value than 0. Garmin Express/Connect are actual and the problem occurs with PC based or mobile app. Other fields like 'Air Drag Coefficient' are ok. Maybe there is no upper range limit set for RRC or the field is handled as integer instead of floating point value!?
Paula Urzua
2020. július 20. | Verziószám: 2.5.0
I have a problem with the data. It shows me always 0. I have modified the coefficients and nothing, the problem still goes. I have the FR245m with speed and cadence sensor Please help :(
A fejlesztő válasza
2020. július 22., xuxumatu
thanks for witting you need a cadence sensor for this to work if you have de sensor detected but it´s not working i gives you zeros, coefficients it´s garmin express problem, update to the latest versión. or ir you are using on a trainer mode better use power bike field 4, its algo free.
Antony VP
2020. július 19. | Verziószám: 2.4.7
Bonne application. J'ai un capteur de cadence, mais pas de capteur de vitesse. Ça semble fonctionner. C'est assez complexe a paramétrer et je n'arrive pas a utiliser "." ou "," pour paramétrer le poids, le coefficient de résistance ou toutes autres données.
A fejlesztő válasza
2020. július 20., xuxumatu
Merci pour la revue, l'application peut être utilisée sans capteurs mais perd en précision, et pour saisir les données de coefficient en décimales, vous devez mettre à jour votre garmin express et / ou garmin connect à la dernière version, si vous avez un garmin qui le prend également en charge vous pouvez utiliser Power Bike Field ou Power Edge Field, plus faciles à configurer.
Aaron Herrera
2020. július 13. | Verziószám: 2.3.7
I'm pretty much with a review down there. The values doesn't make sense to me when using it with a Fenix 6, cadence and speed sensor: Recorded values of AVG power and NP are 2 W and 10 W while Strava the average power is 174 W (Ride with 90 km in 3h, I guess you need to put some Watts for that). Recording is set to 1 s, GPS + Glonass and autostop. Any idea of what could be wrong?
Marcus
2020. július 7. | Verziószám: 2.3.6
This is the best datafield. Exact what I originally expected from Garmin to provide as I learned that Strava has calculated power displayed. Instead of GPS using the Speedsensor additionally on my bike seems to fix issues with unrealistic peak values. I guess ascents are considered by gps signal, wind impacts cannot be considered because no data available at time of recording How does avg power and np power differ in calculation? One configuration issue I found. It is not possible to change rolling coefficient value in setting. As soon as I change the Warning pops up that value cannot be bigger 0 and not smaller 0. Even reentering initial value is not possible. Please fix this and the datafield is perfect for everyone who cannot or dont want to spend lots of money for powermeter
A fejlesztő válasza
2020. július 8., xuxumatu
Thanks for the review the algorithm considers air density depending of the altitude and temperature and yes it uses gps and I recommended to change GPS to Glonass or Galileo on 1 second recording for better precision, the decimal input format it’s a garmin express problem update to fix it, np calculations depend of at least 30 min ride above your ftp to be shown
Guy BELLOT
2020. június 20. | Verziószám: 2.2.7
I used your Data Field Toaday for the first time. I need to analyze the figures but summary figures are quite strange. AVG Power: 21W (versus 210 by Strava) Max power: 1,957W (versus 1,081 by Strava) NP: 19W FTP Power: 210W AVG Power and NP are not relevant (do they include 0?). I know for sure that I am not able to push 2,000W.
A fejlesztő válasza
2020. június 20., xuxumatu
Power Bike Pro uses 20 variables algorithm and Strava has only 16, Strava for example calculates power when you are not pedaling, for better results we recommend you yo use cadence and speed sensor, GPS on 1 Sec, on galileo or glonass, calibrate the altimeter and enable auto pause thanks for the review
Juanjo Delgado
2020. június 19. | Verziószám: 2.2.7
La aplicacion funciona aparentemente bastante bien, pero NO permite modificar el "coeficiente de resistencia a la rodadura", que por defecto indica 0,0045. Si se intenta modificar, indica que el Valor debe estar comprendido entre 0 y 0 (Pienso que se trata de un error que deberia solventarse). Dicho error, tambien provoca que el resto de valores (Como peso de la bici, temperatura, FTP, etc.) no puedan modificarse si dicho coeficiente no se deja a 0. En mi caso, lo quiero usar en Bicicleta de Montaña, y seria interesante poder modificar dicho parametro, y por supuesto tambien el resto de valores. Por lo demas, la aplicacion parece genial. El Dispositivo usado es un Edge 530.