2020. lipnja 11 | Verzija 2.15
Works greate. But is there a Option To Show it in the Garmin Connect App Like Garmin (smooths the vo2 all over runs). Since Garmin doesnt Show me the vo2 any more on my vivoactiv 4s i thought this App could Show me this insteat. But greate Job.thanks.
2020. lipnja 08 | Verzija 2.13
Works fine for me, thx.
2020. svibnja 24 | Verzija 2.05
Great data field, a must have and definitely one I'd recommend to anyone. Performing a Cooper Test now with a warm up delay makes it perfect for me. Great developer, very good work!
2020. travnja 28 | Verzija 2.02
Hi can anyone tell me how it works? I have forerunner 245 but I have no idea where on my watch it is!? Thanks
2020. travnja 28, Surfy66
Hello Matin. To install and use a datafield on a Garmin watch, go here: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store
2020. travnja 26 | Verzija 2.02
first of all thanks for this wonderful datafield.
Today I tried it on a long run, and everything was working fine, incl. writing into fit file.
But there is one thing I do not understand. At the end of the run my Garmin watch (Fenix 6s) said VO2max of 46. But your data says between 30 and 34 during the run.
This seems to me a little bit far off ... almost 50%.
Do you have any idea what happended or what I made wrong?
Do I have to do any settings?
2020. travnja 27, Surfy66
Hello Peter, and thanks for your review. The main difference between this datafield and the VO2 calculated by the firmware of your watch is that this datafield calculates your VO2 in real time, whereas Garmin smooths it all over your runs, which could explain the difference. The second thing to take in consideration is the reliability of the HR during the ride, as the datafield uses this datum to calculate the VO2. So, if your HR is not as accurate or reliable as it should be, the VO2 calculated in real time will not be accurate too and, as the datafield works fine for the whole majority of all the users (that it seems to be), this could also be the issue.
2020. travnja 02 | Verzija 2.02
A little confusing at first, but I now understand what this means and feel a little better knowing my VO2max can be calculated more accurately. Thanks so much for this app. Hope you can get a job soon
2020. travnja 02, Surfy66
Hello William, and thanks for your nice comment.
Lau Flemming Pedersen 🇩🇰
2020. veljače 17 | Verzija 2.02
Work perfect and without any problem!!
Best cooper test on the market..
2020. veljače 04 | Verzija 2.02
Works only with the white background. If I choose black, it does not show data but only records it.
2020. siječnja 31 | Verzija 2.02
What is coopers test timing. As watch is vibrating continue while running.
Jose Manuel Pérez Viaplana
2020. siječnja 11 | Verzija 2.02
He descargado la app y he sincronizado, pero no consign a accede a fella.
Podéis decirme como?
2020. siječnja 11, Surfy66
Hello Jose. First, to ask such a question, it would have been better to send me an email rather than posting a bad evaluation here which is not related to a malfunction of the datafield. If you can delete your comment after reading (or reassess the note), thank you. To install and use a datafield, go here: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store
2020. siječnja 08 | Verzija 2.02
Esta bien. Pero cuando pongo la pantalla se pone a vibrar.
2020. siječnja 08, Surfy66
Hello and thanks for your comment. It's probably normal as there are two reasons when this datafield may vibrate: 1- your current HR exceeds your max HR (check if your max HR is correctly set into your profile); 2- you set the Cooper test with a duration of 0 mn. So, check those two conditions and this should solve the issue.
2020. siječnja 07 | Verzija 2.02
Bonjour, pouvez vous m aider, j ai installé l appli mais ça ne fonctionne pas, j'en arrive a avoir aucune donnees de vo2 max, il y a t il quelque chose de spécifique à faire, j ai une vivoactive
2020. siječnja 07, Surfy66
Bonjour Lessire et merci pour votre commentaire. Ce datafield fonctionne parfaitement, mais pour cela, il faut qu'il ait été intégré à un profil d'activité sportive, en l'occurrence ici, le profil course à pied. Ouvrez le profil course, entrez dans le mode édition du profil, choisissez un écran de données et paramètrez-le sur 1 donnée puis, intégrez le champ IQ Running VO2 comme nouveau champ de données. Sauvegardez la modification et sortez du mode édition. En défilant maintenant les écrans du profil sportif, vous devriez voir apparaître mon datafield. Lorsque vous lancerez l'activité, tous les calculs s'effectueront automatiquement, résultats que vous pourrez alors consulter dans Garmin Connect une fois votre activité synchronisée avec Connect. N'hésitez pas à me contacter par mail si vous rencontrez toujours des difficultés.
2019. prosinca 26 | Verzija 2.02
Nice data field! Lots of useful info-almost too much while running, but once I get used to it, I’m sure this will help me in my training! Good job!
Kristen le nouy
2019. prosinca 17 | Verzija 2.02
Very happy fromnthis datafield
2019. studenoga 10 | Verzija 2.02
Bonjour j'ai effectué un test Cooper de 12min et un footing de 1h et à la fin je voulais synchroniser ma montre avec mon tel. Et la aucune activité et détecté et rien sur le test, besoin d'aide
2019. studenoga 10, Surfy66
Bonjour Izgaghan. Pourquoi écrire un commentaire ici alors que nous communiquions déjà par mail... Je ne vois pas ce que je pourrais apporter de plus ici comme réponse...
2019. rujna 08 | Verzija 1.47
Did a test: Cycling app showed 5 ml/kg/min more than the running app at maximum (nearly same conditions, same pace etc). Is it possible to add watts (via Stryd for instance) to the running formula?
2019. rujna 07 | Verzija 1.47
Why would you allow for setting up weight, elevation and other variables, inside the cycling VO2 app, but not this one? It was working ok for some time, but right now, the data is wrong. Does it consider age and body size? My VO2 max is not 35.
2019. rujna 07, Surfy66
Hello Marcel. This is just because the calculation method for both different VO2 max is different, and does not require the same infos.
2019. kolovoza 09 | Verzija 1.47
I can only give three stars now because I have been unable to even find it on my watch!
I have a Forerunner 735 XT and was really looking forward to getting an ongoing assessment of my VO2 max. I downloaded the app, and according to Garmin Express, it has been installed on my watch - but - where is it?
Suspect I have done something wrong and would appreciate any help offered!
2019. kolovoza 25, Surfy66
Hello Nick. As explained on the description, this is a data field not an application and needs to be added to a single data screen within a sport activity.
1- go to settings, apps, sport activity, data screen, screen 1
2- set layout to 1 field
3- set field 1 to ConnectIQ Fields, JMGDTFRunningVO2
2019. srpnja 20 | Verzija 1.47
Great data field and very useful. Though I don't get the same score in the Garmin watch I think the watch score is the wrong one. Thankyou!!!
2019. srpnja 07 | Verzija 1.47
Une l’application chargée et installée sur la montre, comment fait-on pour la lancer svp ???
2019. svibnja 30 | Verzija 1.47
Garmin told me VO2max at 50 and this app at 46,5
I've done a interval training to go at the max to obtain this result.
What is the difference in term of computation algorithm ? Which one is the "good one" ?
Many thanks for your answer.
PS : suggestion : instead of 1 data field written in small on my VivoActive3, why not 2 data field, to allow bigger figures (easier to read ... :-)) thanks !
2019. svibnja 26 | Verzija 1.47
Great data field! It is pretty much what I was looking for to have on my vivoactive 3. Just a minor point: Could you maybe also add the export of the calculated training effect, so that it can be checked as well in the saved activity in the app. Right now it can only be read during the activity on the watch. That would be great! Thank you in advance.
2019. svibnja 27, Surfy66
Hello Flo and thanks for your comment. Actually, the Training Effect value is already saved by default by Garmin, you can find it in the summary of the activity.
2019. travnja 19 | Verzija 1.46
This feature is great, thank you! Using it from treadmill running. It would be great if it could integrate with Garmin Graphs for historic. Is there a way at least to extract data build a graph on the computer?
2019. svibnja 27, Surfy66
Hello Marco and thanks for your comment. In fact, when you synchronize your device with Garmin Connect, the activity is transferred to your Garmin profile then, you can see it in the list of all your activities, with all the data and graphs displayed.
Hans ter Horst
2019. travnja 14 | Verzija 1.46
I'm using your VO2 apps for both running and cycling; Garmin missed the boat on this feature on my fenix watch and I'm really happy you're filling the gap. Thanks!
2019. veljače 26 | Verzija 1.46
I worked on a running simulator and in the report, the Vi2max classes is 41, and in the Garmin Conect program, the VO2max indicator did not change the indicator and remained equal to 39, why?
2019. veljače 26, Surfy66
Hello and thanks for your comment. Unfortunately, it's not possible to modify the VO2 calculated by Garmin with third party calculated data. That's the reason the Garmin VO2 did not changed by this datafield.