AVERTISSEMENT: l'application ne doit pas être utilisée comme source d'informations principale et est uniquement à des fins récréatives. Toutes les informations, le contenu et le matériel de cette application sont à des fins récréatives uniquement et ne sont pas destinés à servir de substitut à la consultation, au diagnostic et / ou au traitement médical d'un médecin qualifié.</p><p>Remarque: Lisez à propos de HRV concernant le rhume et les virus (https://www.fbbbrown.com/heart-rate-variable-can-indicate-colds-and-viruses/)</p>
Développeur CIQ de l'année 2019</p><p>Pour acheter pour 3,00 $ + frais d'activation par courriel (activation fournie après le paiement, alors n'attendez pas!)</p><p>Achat: https://www.fbbbrown.com/garmin-connect-iq/</p><p>Plus d'aide HeartMonitor: https://www.fbbbrown.com/garmin-connect-iq/help_faq/#heart</p><p>Déverrouiller: https://www.fbbbrown.com/garmin-connect-iq/help_faq/</p><p>FAQ: https://www.fbbbrown.com/garmin-connect-iq/help_faq/#trouble</p>
Cette application nécessite l'accès aux éléments suivants :
Adam Birtok
10 janvier 2021 | Version 3.9
Great app. I use it with the OHR, Fenix 6x. Data seems reliable!
Kalin
2 janvier 2021 | Version 3.9
I could not work out how to use the app at all. It just would not show me the HRV, which was the main reason for downloading this app and subscribing. I now found a free app that is doing a great job (at least for me, as I am only interested in HRV) and would like to unsubscribe from this app. How do I do that? I do not want to be charged for something I do not find helpful and do not use. Kalin
Réponse du développeur
3 janvier 2021, f3b
Kalin, Sorry you are having an issue, if you are using an optical sensor movement will cause no readings, remain still during measurements. For HeartMonitor+ HRV (full Application), an external ANT+ Chest HRM strap is required for devices less than CIQ 3.0 or Edge. Only IQ 3.0+ watches support the advanced optical sensor. Only IQ 3.0 devices, support directly connected ANT+ and BLE external HRM’s. If CIQ is less than 3.0 or Edge, Make sure to Disconnect the ANT+ Chest HRM from your device, from device Settings,Sensors,HRM. Set the HRM status to OFF. The HeartMonitor+HRV app will make the ANT connection to the Chest HRM, since it needs all the information provided by the HRM. For best results: Set data recording to every second, this helps the entire system including GPS. Main menu,settings,system,data recording, set to every second
Carlos Martínez-Cano
19 décembre 2020 | Version 3.9
I tried out the 5 minute trial version and was interested in using it more. However, navigating to the purchase link one is offered a number of "subscription" options, which is distinct from making a purchase. Nowhere in the description is the word "subscription" used. This is disingenuous and unethical. Based solely on that fact, I wouldn't engage with this developer further.
Kris19
19 décembre 2020 | Version 3.9
Christian Stepke
11 décembre 2020 | Version 3.9
Ich nutze das Produkt zusammen mit dem Garmin edge 1000 und einem garmin pulsgurt. Es werden bei mir aber keine hrv Werte angezeigt. Benötige ich einen speziellen pulsgurt der die Funktionen unterstützt?
Réponse du développeur
11 décembre 2020, f3b
Vielen Dank für die Überprüfung. Für HeartMonitor (Datenfeld) ist für alle CIQ-Versionen ein externer ANT + Chest HRM-Gurt erforderlich. Stellen Sie sicher, dass Sie das ANT + Chest HRM von Ihrem Gerät unter Geräteeinstellungen, Sensoren, HRM trennen. Setzen Sie den HRM-Status auf AUS. Die HeartMonitor-Datenfeld-App stellt die ANT-Verbindung zum Brust-HRM her, da alle vom HRM bereitgestellten Informationen benötigt werden. Für HeartMonitor + HRV (vollständige Anwendung) ist für Geräte unter CIQ 3.0 oder Edge ein externer ANT + Chest HRM-Gurt erforderlich. Nur IQ 3.0+ Uhren unterstützen den fortschrittlichen optischen Sensor. Nur IQ 3.0-Geräte unterstützen direkt angeschlossene externe HRMs von ANT + und BLE. Wenn der CIQ kleiner als 3,0 oder Edge ist, stellen Sie sicher, dass Sie das ANT + Chest HRM von Ihrem Gerät unter Geräteeinstellungen, Sensoren, HRM trennen. Setzen Sie den HRM-Status auf AUS. Die HeartMonitor + HRV-App stellt die ANT-Verbindung zum Brust-HRM her, da alle vom HRM bereitgestellten Informationen benötigt werden. Für beste Ergebnisse: Stellen Sie die Datenaufzeichnung auf jede Sekunde ein, dies hilft dem gesamten System einschließlich GPS. Hauptmenü, Einstellungen, System, Datenaufzeichnung, auf jede Sekunde eingestellt
Adam Cunningham
24 novembre 2020 | Version 3.9
Works rarely. Lately not at all. Garmin Fenix 3 paired with garmin chest strap. Not worth the money.
Patrick Mix
11 novembre 2020 | Version 3.9
Hallo, ich nutze eine Forerunner 735XT aber, trotz Eingabe meiner E-Mail Adresse zur Bezahlung ändert sich nichts auf der Uhr? Soll die E-Mail Adresse die Verknüpfung mit dem Google Konto sein? Oder mache ich sonst iwas falsch? LG Patrick
Sam Logan
9 novembre 2020 | Version 3.9
It won't pick up my HR. My watch is tight and my watch itself is picking up my HR
Réponse du développeur
10 novembre 2020, f3b
Sam, Sorry you are having a problem, but there are minimum requirements for this app. For HeartMonitor+ HRV (full Application), an external ANT+ Chest HRM strap is required for devices less than CIQ 3.0 or all Edge. Only IQ 3.0+ watches support the advanced optical sensor for HRV. Only IQ 3.0 devices, support directly connected ANT+ and BLE external HRM’s. If CIQ is less than 3.0 or Edge, Make sure to Disconnect the ANT+ Chest HRM from your device, from device Settings, Sensors, HRM. Set the HRM status to OFF. The HeartMonitor+HRV app will make the ANT connection to the Chest HRM, since it needs all the information provided by the HRM. If you still need help please contact me and update this review when you receive the HRV data.
Bruno
3 novembre 2020 | Version 3.9
Bonjour. Je n'arrive pas à comprendre comment fonctionne l'application. J'ai une Garmin F235 cardio poignet. Il faut une ceinture cardio ? J'ai le test de 5 minutes, je télécharge l'activité, il n'y a pas de données particulières qui s'affichent dans Garmin Connect. Cette application est bien censée mesurer la variabilité cardiaque ? Merci
Réponse du développeur
10 novembre 2020, f3b
Merci d'avoir donné votre avis, Oui avec le FR235 CIQ1.3 un HRM thoracique est nécessaire. Pour HeartMonitor + HRV (application complète), une sangle externe ANT + Chest HRM est requise pour les appareils inférieurs à CIQ 3.0 ou tous les appareils Edge. Seules les montres IQ 3.0+ prennent en charge le capteur optique avancé pour HRV. Seuls les appareils IQ 3.0 prennent en charge les HRM externes ANT + et BLE directement connectés. Si CIQ est inférieur à 3,0 ou Edge, assurez-vous de déconnecter l'ANT + Chest HRM de votre appareil, des paramètres de l'appareil, des capteurs, de la HRM. Réglez le statut HRM sur OFF. L'application HeartMonitor + HRV établira la connexion ANT au Chest HRM, car elle a besoin de toutes les informations fournies par le HRM. Si vous avez encore besoin d'aide, veuillez me contacter et mettre à jour cet avis lorsque vous recevrez les données HRV.
David O'Neill
1 novembre 2020 | Version 3.9
Love this app, BUT Any known issues with is app and other watch faces? I use both Fusion and Actiface watchface, and the stopped working after downloading this app.
Drez
30 octobre 2020 | Version 3.9
I have the tactix delta solar...do I need a strap to work with your widget?
Sean Brown
29 octobre 2020 | Version 3.8.1
juan jose jimenez Rilo
25 octobre 2020 | Version 3.8.1
Compré la aplicación pensando que valdría cómo ayuda para mis entrenos y no sirve para nada. Los datos que me da ni se como interpretarlos, salvo seas médico. La desinstale
Joel
24 octobre 2020 | Version 3.8.1
At first I thought this app didn’t show anything in the free version. It linked to pay for the paid app at the end of the 5-minute test. But some of the information showed up in Garmin Connect like an activity would including some graphs. Being recorded into Garmin Connect as an activity, it also synced to Strava with my HR data but without the HRV info (good for me since I don’t want all my followers to see every HRV test I do). Worth it to test out and see if you want to pay for the full version.
IGOR
17 octobre 2020 | Version 3.7
В приложеии НЕТ IS - индекса стресса, в Garmin Connect нет графиков гистограммы и скаттерограммы. Самому считать? The APP doesn't have an IS stress index, and Garmin Connect doesn't have histogram or scatterogram graphs. To take?
Andreas
4 octobre 2020 | Version 3.7
Kevin Montany
2 octobre 2020 | Version 3.7
>habe App für ein Jahr gekauft ... ich verwende vivoactive 3 ... wenn App über Nacht den Schlafmodus aufzeichnen soll, funktioniert es nicht mehr ... (lediglich einmal hat es funktioniert ) ... was mache ich falsch=?<
David
2 octobre 2020 | Version 3.7
I think I have this app working - but I’m not sure and that’s why I’m writing (and why a 3 rating - at this point). I have a Garmin 645 and a Garmin Run HRM strap, which both work fine. When I run this app (which I can only do from the watch), it runs and produces “results” / output stats on my watch (very hard to read as the phone interface is relatively small). When I sync my watch to my Garmin app on my iPhone it registers as an activity on the main screen (without useful info), and when I click on that I can see lots of metrics. However - I don’t understand the metrics, how to interpret them on your app etc - and I cannot find anything on your web site that helps in this regard. For example - I have a HRV avg of ~80 (per your app, if I’m reading it correctly ??). Is that out of 100 max, or is the max higher than that? Is 80 low or high in your measurement? Is it a standard measurement such that I can compare it to studies about HRV etc.
Réponse du développeur
2 octobre 2020, f3b
David thanks for reviewing, the full version provides 20+ additions data values and Graphs. The Limited version only provides several metrics to Connect for viewing and provides all data at the watch. HRV information is widely available on the internet and I provides several links on my website to references. Viewing is best on the website connect.garmin.com. For best results set Data Recording to ‘Every Second’. All devices the default is ‘Smart Recording’, which means the Fit file is not being written every second and will miss important heart events. From the watch main menu go to Settings, System, Data Recording.
Frank.Hogan
28 septembre 2020 | Version 3.5
Waste of time for Vivoactive HR without a chest strap. If you have a chest strap then it may be useful. The Garmin blurb says it is compatible but you only find out you need a separate chest strap monitor when trying to work out why it doesn't give any useful information.
Ciaran O'Connor
28 septembre 2020 | Version 3.5
Réponse du développeur
2 octobre 2020, f3b
Sorry you are having a problem, for HeartMonitor+ HRV (full Application), an external ANT+ Chest HRM strap is required for devices less than CIQ 3.0 as in the FR 735xt. Only IQ 3.0+ watches support the advanced optical sensor. Only IQ 3.0 devices, support directly connected ANT+ and BLE external HRM’s. If CIQ is less than 3.0, Make sure to Disconnect the ANT+ Chest HRM from your device, from device Settings,Sensors,HRM. Set the HRM status to OFF. The HeartMonitor+HRV app will make the ANT connection to the Chest HRM, since it needs all the information provided by the HRM.
Andreas
28 septembre 2020 | Version 3.5
the app doesn't work at for Forerunner 735xt and Polar H10 YES the unlocking is quite simple just copy purchase email. but the app doesn't work
Réponse du développeur
28 septembre 2020, f3b
Andreas, sorry your are having a problem. With the FR 735 (CIQ 2.0 watch) the HeartMonitor+ HRV (full Application), an external ANT+ Chest HRM strap is required for all devices less than CIQ 3.0. Only IQ 3.0+ watches support the advanced optical sensor and support directly connected ANT+ and BLE external HRM’s. If CIQ is less than 3.0, Make sure to Disconnect the ANT+ Chest HRM from your device, from device Settings,Sensors,HRM. Set the HRM status to OFF. Polar H10 is compatible, with HeartMonitor+ HRV. if you still need help please contact me and considering revising this review when it works for you.
Kevin Carter
23 septembre 2020 | Version 3.5
Installation is very confusing. I would like refund.
Réponse du développeur
23 septembre 2020, f3b
Sorry, you are having a problem. I will refund, but perhaps I can help! I replied to your email and the most common mistakes are not using Connect Mobile App, using the wrong email or a typo during purchase or unlocking. The unlocking is a simple copy and paste of your purchase email.
Suraj Lama
20 septembre 2020 | Version 3.4
Emilio
16 septembre 2020 | Version 3.4
He instalado la aplicación y no me aparece en el reloj, he pagado por paypal y aún no tengo el código de desbloqueo
Réponse du développeur
21 septembre 2020, f3b
Para las primeras instalaciones, es posible que sea necesario reiniciar para instalar la aplicación. Por favor contácteme para obtener su información. ... .For first installs a reboot may be required to install the app. Please contact me to get your information.
Désolé, aucune statistique n'est disponible pour le moment.