Widget shows current temperature in Celsuis, Fahrengeit, Kelvin degrees. Press START button or tap the screen to change units. Large font used.</p><p></p><p>It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental tempearature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. For some devices you need to have Tempe external sensor connected to the watch (i.e. Forerunner 245, Gpsmap 66/86).</p>
1.9.1 - SDK 3.2.2, glances added</p><p>1.7.1 - SDK 3.1.9, new devices added</p><p>1.6.7 - SDK 3.1.7</p><p>1.6.6 - SDK 3.1.6, new devices added, exit widget issue fixed</p><p>1.6.2 - SDK 3.1.3 (fix)</p><p>1.3.1 - SDK 3.1.3, venu, vivoactive 4, fenix 6 series, GPSMAP 86 series</p><p>1.2.4 - SDK 3.0.12, forerunner 245, minor fix applied</p><p>1.2.3 - SDK 3.0.11, Edge 530/830, Forerunner 945</p><p>1.2.2 - SDK 3.0.10, MARQ series, vivoactive 3 Mercedes</p>
Cette application nécessite l'accès aux éléments suivants :
Captain Marvel
D2™ Air
D2™ Charlie
D2™ Delta
D2™ Delta PX
D2™ Delta S
Darth Vader™
Descent™ Mk1
Descent™ MK2, Descent™MK2i
Edge® 1000
Edge® 1030
Edge® 1030 Plus
Edge® 1030, Bontrager
Edge® 520
Edge® 520 Plus
Edge® 530
Edge® 820
Edge® 830
Edge® Explore
Edge® Explore 1000
Edge® Explore 820
First Avenger
Forerunner® 245
Forerunner® 245 Music
Forerunner® 645
Forerunner® 645 Music
Forerunner® 745
Forerunner® 920XT
Forerunner® 935
Forerunner® 945
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® 6
fēnix® 6 Dual Power
fēnix® 6 Pro, fēnix® 6 Sapphire
fēnix® 6 Pro Dual Power
fēnix® 6 Pro Solar
fēnix® 6 Solar
fēnix® 6S
fēnix® 6S Dual Power
fēnix® 6S Pro, fēnix® 6S Sapphire
fēnix® 6S Pro Dual Power
fēnix® 6S Pro Solar
fēnix® 6S Solar
fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
fēnix® Chronos
GPSMAP® 66i
GPSMAP® 66s / 66st
GPSMAP® 66sr
GPSMAP® 86i
GPSMAP® 86s
GPSMAP® 86sc
GPSMAP® 86sci
MARQ™ Adventurer
MARQ™ Athlete
MARQ™ Aviator
MARQ™ Captain, MARQ™ Captain: American Magic Edition
MARQ™ Commander
MARQ™ Driver
MARQ™ Expedition
MARQ™ Golfer
Mercedes-Benz Venu®
Oregon® 7 Series
quatix® 6
quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
Rey™
Rino® 7 Series
Venu®
vívoactive® 3
vívoactive® 3 Mercedes-Benz® Collection
vívoactive® 3 Music
vívoactive® 4, GarminActive
vívoactive® 4S, GarminActive S
vívoactive® HR
Samantha Jones
16 octobre 2020 | Version 1.9.1
This doesn’t work for me there is no measurement displayed just a min empty red bar. I have the Garmin Fenix 5s
Naomi Tullos
6 octobre 2020 | Version 1.9.1
Its always in the 70°s, thermometer says im 98.7 , definitely not accurate
Réponse du développeur
7 octobre 2020, Navicom
Variants: 1) Internal sensor is faulty. You need to replace your device. 2) SW obsolete. Update it via Garmin Express 3) Usage scenario does not fit the hardware capabilities. It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental tempearature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. Device cannot measure your body temperature precisely as medical thermometer (please do not expect 36.6 / 98.0). It is hardware limitations and device was designed for such usage. Developers cannot do anything with that, sorry.
Mikel Sasieta
10 septembre 2020 | Version 1.9.1
garmin explorer, como a funcionado durante 2 años que tengo el gps? y ahora me venis con el cuento(You device does not have internal temperature sensor.) sospecho que sera marketing, pero no penseis que voy a cambiar el gps por eso.
Réponse du développeur
11 septembre 2020, Navicom
Please follow the Garmin support, not the 3rd party developers that use SDK provided by Garmin. We do not know why they removed functions from your device. Support for your device will be deleted from our app, we do not want more one-star ratings due to that, sorry.
Алексей
9 septembre 2020 | Version 1.9.1
Pablo Vallés Urriza
3 septembre 2020 | Version 1.7.1
Ya no funciona, podrian volver a poner la primera versión?, es la q funciona, muchísimas gracias
Réponse du développeur
4 septembre 2020, Navicom
Nothing was changed in the code since last update. Only Garmin software engineers can disable or enable features in your device. Why did they do that - we do not know. May be it is an issue, and you need to contact Garmin Support and assign new ticket to investigate. Also you can contact us and provide more details, like what is the device, sw installed on it. We will try to explain issue to Garmin.
Michael
17 août 2020 | Version 1.7.1
Reads and displays the data of the internal temperature sensor. No more, no less. Perfect. Thank you.
Sergio
6 août 2020 | Version 1.7.1
Durand Caroline
3 août 2020 | Version 1.7.1
Any tips to make it work with a forunner 245 music ? (Not supported, invalid sensor data)
RENOTREK
7 juillet 2020 | Version 1.7.1
The year I used this app it worked properly, after updating Edge Explore version 5.20 '' not supported invalid sensor data ''
Krzysztof Grzywacz
6 juillet 2020 | Version 1.7.1
How can i connect tempe to Edge Explore ? I install this widget and Explore still didnt see tempe.
Réponse du développeur
8 juillet 2020, Navicom
It is not possible to use tempe with Edge Explore. Only internal sensor probably is available. If the widget writes no data, then the readings from internal sensor are not available and you should contact Garmin and ask them why do they limit your device.
Nicole Stoker
30 juin 2020 | Version 1.6.7
after latest update the Widget doesn`t work on Garmin explore. Any advice to resolve?
Miro
20 juin 2020 | Version 1.6.7
Zašto uopće postoji ta aplikacija za Temperaturu?? Stvarno ne razumijem.
Alex
30 mai 2020 | Version 1.6.7
It's a very convenient easy to use widget, and it's too sad that I gotta take my watch off for several minutes to get correct temperature measurement, however, at least it shows real time temperature, not like within last 4 hours like original manufacture one.
Kevin Harper
29 mai 2020 | Version 1.6.7
You can't change it from American Fahrenheit to the Rest of the World Celsius. Consequently, of no real use. Uninstalled.
Xavier Caballé 🎗️
9 mai 2020 | Version 1.6.7
It shows the internal temperature of the device, which means nothing... I don't see any reason to have this widget installed.
Réponse du développeur
10 mai 2020, Navicom
We are pleased to say it measures internal temperature of the device. Take device off your wrist and wait - you will get environmental temperature. It is not the medical device, so do not expect precise body temperature measurements. It works as designed. You have a tool and only from you depends how do you use it. If you don't need this, please do not use this widget. Other people use it and have reasons to do it. Thanks for review. Two sad cats are crying.
Natalia Carolina Suárez
26 avril 2020 | Version 1.6.7
Is not accurate is arroud 3 or 4 degrees under normal temperature I just checked and I'm 31.9 Celsius
Réponse du développeur
26 avril 2020, Navicom
Garmin is not a medical device. Internal sensor measures the temperature inside the case. Of course it not placed directly on your skin, so the external tempearture and internal tempearture balance is found. It is hardware design and not the software issue. Please refer to the Garmin with the ideas how to improve the sensor readings. garmin.com/ideas Thanks for review. Stay healthy! Be happy!
Cristian Mezei Valentin
7 avril 2020 | Version 1.6.7
it's measures body temperature? or outside? thanks!
Réponse du développeur
9 avril 2020, Navicom
It reads the internal sensor data. Sensor is affected by the body heat. Take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. Your body heat affects internal sensor. It is by Garmin design, not the Connect IQ developers. Thanks for review!
Michał
19 mars 2020 | Version 1.6.7
On my VA4 work slowly. Please add set default unit in settings.
Réponse du développeur
19 mars 2020, Navicom
It depends on Garmin Developers and you should contact support to improve speed of the device. It is not our fault, widget did not change, and it worked fast. Since some updates it works not so fast. Please descript the second request regarding settings via Contact Developer form, include your email for the feedback.
G.R.
15 mars 2020 | Version 1.6.7
FC. JAVIER DE LA FUENTE GONZALEZ
6 mars 2020 | Version 1.6.7
It gives temperatures of 33º when there are 15 in my Garmin Venu
HJLANGER
12 février 2020 | Version 1.6.7
wird nicht auf dem GPSMAP angezeigt. Sollte eigentlich kompatibel sein.
Meg Schlachter
25 janvier 2020 | Version 1.6.6
Can’t report bug to contact developer section, keeps saying “error.” The issue I’m having is on my Garmin FR 920xt. Get error message “Not supported. Invalid sensor data”.
Réponse du développeur
26 janvier 2020, Navicom
Sorry about that. Link https://apps.garmin.com/en-US/apps/7a18ba6f-15ea-443c-a5a1-d74266e63c5e/contactdeveloper should work when you signed in your Garmin Connect Account. Unfortunately, FR920 does not have internal temperature sensor available to SDK, so for your device the Tempe sensor will work only. Pair it and launch widget.
Henry Lazarus
11 janvier 2020 | Version 1.6.6
Doesn't give accurate temperature for the edge explore. I waited a half hour for the sensor to reach local temperature and it was off at least 10 degrees.
Chris Higham
29 décembre 2019 | Version 1.6.6
Doesn't seem to support forerunner 245 - invalid sensor data...
Désolé, aucune statistique n'est disponible pour le moment.
Widget