叫我機王
3 de octubre de 2018 | Versión 2.7.5
There is an another issue. When the notification is showed up in the watch, and then cleared the notification in the mobile phone, the notification icon is still existed there. You need to enter the notificating app in the watch, and then the icon finally disappear. Can you fix it, let the notification icon will disappear immediately when clear or read the notification in the mobile phone.
Respuesta del desarrollador
5 de octubre de 2018, Timb320
Unfortunately I'm getting the notification count from the system - not something I can control. I will double check if there is a better way but likely this is by design at present.
Allalin72
23 de agosto de 2018 | Versión 2.4
Still IQ error at fenix 5x
Respuesta del desarrollador
9 de septiembre de 2018, Timb320
Please send me your CIQ_LOG.yml file to [email protected] so I can debug and fix. Should be in your GarminAppsLOGS folder.
Allalin72
11 de agosto de 2018 | Versión 2.0
F5x IQ! Error after switching colors. Brand new watch. First installation of this watchface.
Dmitry
8 de julio de 2018 | Versión 1.9.43
Great face! A bit buggy layout on Fenix 5 Plus (overlapping labels) though
Respuesta del desarrollador
9 de julio de 2018, Timb320
I Just updated it to fix an out of memory issue with the 5/5x plus series
Mohamed Bel Haj Hassine
9 de junio de 2018 | Versión 1.7.2
Thanks, among the best faces
Mohamed Bel Haj Hassine
2 de junio de 2018 | Versión 1.6.14
switch between the widgets and the Watchface has become long, after the lasts updates.
Check the video
https://1drv.ms/v/s!Akr0jv41oBL2h9FeVqDiaCrro8UoGw
Respuesta del desarrollador
2 de junio de 2018, Timb320
Switch off advanced view is settings, should reduce the load time with a more basic view
Mohamed Bel Haj Hassine
27 de marzo de 2018 | Versión 1.5.18
switch between the widgets and the Watchface has become long, after the last three update
Allalin72
31 de enero de 2018 | Versión 1.1.25
Getting better. Thanks for updating pressure with sensor history. Works fine on f5x. IQ! error after switching color theme is still there. I will send error log when watch connected to mac.
Respuesta del desarrollador
12 de febrero de 2018, Timb320
NOTE: If you are experiencing a crash please delete your settings file as it may be outdated (as new features/settings were added)
in the folder on your watch GarminAppsSETTINGS, Delete file that ends in *.Set. named with a unique alphanumeric number,
If you have more then one, you will have to open it and compare - look for your darksky key e.g. DarkSkyApiKey: key
Then unplug watch and re-setup your settings. This has resolved it for others.
Allalin72
30 de enero de 2018 | Versión 1.1.23
As other reviewer getting IQ! error after switching to other color. Pressure wrong. Please get pressure from sensor history. Then it should show right value, like the garmin build in widget and all other iq watchfaces doing that.
Respuesta del desarrollador
31 de enero de 2018, Timb320
Pressure is from darksky.. Unless something changed in the sdk, watchfaces are not allowed to access the pressure sensor on the watch - I'll check again! Also send me your CIQ_Log.Text to [email protected]
Rico815
28 de enero de 2018 | Versión 1.1.21
Same as other reviewers on Fenix 5X..if you change colors it reverts back to stock watch face and shows iq? error
Respuesta del desarrollador
29 de enero de 2018, Timb320
Could you send me CIQ_Log.Text in your GarminAppsLogs folder? Send to [email protected] Thanks
Allalin72
28 de enero de 2018 | Versión 1.1.15
F5x: after switching to other color theme then default, getting IQ! error.
Respuesta del desarrollador
29 de enero de 2018, Timb320
I believe I have it fixed now. Color definitions were not consistent between languages
Mohamed Bel Haj Hassine
28 de enero de 2018 | Versión 1.1.15
The value of the temperature is displayed in Fahrenheit and not in degrees Celsius.
For the wind speed it seems ok thank you
Mohamed Bel Haj Hassine
27 de enero de 2018 | Versión 1.1.14
the wind speed still displayed in m/s and not in km/h. please can u fix it.
Jim Parks
22 de enero de 2018 | Versión 1.1.12
Decent watch face... sunrise / sunset doesn’t appear to work properly. Shows a standard 1am/1pm window for UTC-5:00. Other than that, seems pretty solid.
Respuesta del desarrollador
23 de enero de 2018, Timb320
Make sure you set your UTC time in settings so sunrise/sunset are accurate along with your long/lat
Mohamed Bel Haj Hassine
17 de diciembre de 2017 | Versión 1.1.9
the wind speed is displayed in m/s and not in km/h.
Mohamed Bel Haj Hassine
6 de diciembre de 2017 | Versión 1.1.2
the wind speed still incorrect. for example now the speed is 1.6kmh on the watchface and it is 6.1kmh on darksky. and it is 6.1kmh on the others apps that uses darksky.
Allalin72
5 de diciembre de 2017 | Versión 1.1.1
Getting better, but pressure value is wrong. And it must be mb (milli Bar) not ml. Cant understand why change from hPa to ml (mb) because its the same.
Respuesta del desarrollador
5 de diciembre de 2017, Timb320
I will change it back, thanks for the feedback. FYI I retrieve pressure from darksky https://darksky.net/dev/docs now and if cant connect it will then be calculated based on altitude which will only be accurate when outside in natural environment. It was another feedback that prompted the change. Thanks again
Mohamed Bel Haj Hassine
4 de diciembre de 2017 | Versión 1.1.1
By far the best watchface. The only problem is that the wind speed is wrong and that was also the problem of previous versions.
Respuesta del desarrollador
5 de diciembre de 2017, Timb320
Windspeed converted to km/h verified to be correct i.e. 1 mph = 1.6 km/h per http://www.weather.gov/epz/wxcalc_windconvert , I retrieve wind speed from darksky based on your location set in settings so make sure its correct. default returned in mph which I convert for metric based settings if set on watch.
Darec
1 de diciembre de 2017 | Versión 1.1.0
It stops working after 2 days of installation :(
Respuesta del desarrollador
2 de diciembre de 2017, Timb320
please send me the GarminAppsLOGS ICQ log so I can debug it.
Thanks much
Mohamed Bel Haj Hassine
22 de noviembre de 2017 | Versión 1.0.20
Best watchface, thanks
Thursday in french is Jeudi not Geudi.
and it will be very good if wind speed in kmh
Piero Piccioni
20 de noviembre de 2017 | Versión 1.0.18
You are achieving perfection. For us Europeans can you put the wind speed unit in km/h and the atmospheric pressure in millibars? Thank you very much.
Piero Piccioni
10 de noviembre de 2017 | Versión 1.0.13
Make your watch better. Thanks for the extraordinary work. Can UMTWRFS change the Italian or international language?
Respuesta del desarrollador
12 de noviembre de 2017, Timb320
Got the code working for this, may need to also add it for the date, does the date show in your language currently on your watch?
Pavel Shatsman
10 de noviembre de 2017 | Versión 1.0.12
Love this watchface after latest updates everything works fine !
Thank you for hard work !
Allalin72
8 de noviembre de 2017 | Versión 1.0.7
Sorry, update doesnt work. All data are wrong at f5x. 2574 steps and 251.7 km. Wow! Baro always 1008. batt is 42%, but face shows 81% all time.
Respuesta del desarrollador
9 de noviembre de 2017, Timb320
Still working on the others. Note Barometric pressure is based on altitude reading and will not truly reflect accurate pressure unless your outside. Its not from the barometer sensor as we are not allowed access to the sensor on watch faces, Battery is at the top and confirmed to be accurate. The % reading you are seeing on the lower left is memory usage, that should be stagnet.
Allalin72
7 de noviembre de 2017 | Versión 1.0.6
Nice Design, but direct after install crazy wrong data at fenix 5x. Sunrise shows 08:44 but must be 07:17; sunset 18:04 must be 16:26; 1008 hPa must be 1020; 254,6km must be 1,6 !!!
Respuesta del desarrollador
8 de noviembre de 2017, Timb320
Thanks for your feedback. Got the metric issue fixed, working on the others. Will release and update once I get the others done. Thanks again..
Watch Face 
