App Icon

CRTTempeField

Descripción

This datafield connects to an external Tempe sensor, displays the current temperature, saves a temperature graph and the average temperature during the session to the activity FIT. The graph and the average temperature can be seen on Garmin Connect. </p><p></p><p>Preferred temperature format can be selected and recordings can also be enabled/disabled in the datafield settings. </p><p></p><p>The main purpose of the datafield is providing Tempe connectivity which is not supported natively on the Edge series.

Novedades

v0.1.1 - Initial release

Información adicional

Permisos

Esta aplicación requiere acceso a:

  • Enviar/recibir datos mediante la radio ANT con sensores de terceros
  • Registrar información adicional en archivos de actividad
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030 Plus Edge® 1030 Plus
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 130 Edge® 130
  • Edge® 130 Plus Edge® 130 Plus
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 530 Edge® 530
  • Edge® 820 Edge® 820
  • Edge® 830 Edge® 830
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • Forerunner® 945 Forerunner® 945
  • Forerunner® 945 LTE Forerunner® 945 LTE
  • MARQ™ Adventurer MARQ™ Adventurer
Calificación media: (15 calificaciones)

Christian Hildebrand
3 de julio de 2021 | Versión 0.1.1

Super.... Der externe Temperatursensor funktioniert jetzt auf dem Edge 830

Sir5
14 de junio de 2021 | Versión 0.1.1

Works great for my 1030 Plus. Even when using structured workouts (with automatic 'laps'), the fields keeps working throughout the sessions. Tempe fixed under saddle, temperature readings are now much much better than with the internal sensor.

Michael Schwarze
23 de mayo de 2021 | Versión 0.1.1

As others mentioned already... Has a bug when lap counts are used (automatic or manual). If you don't use this feature, it seems to work fine.

schemoul
19 de marzo de 2021 | Versión 0.1.1

Simplement parfait! 29° avec la température edge 1030+, 20.2° with datafied.....:-)

franco fanti
7 de enero de 2021 | Versión 0.1.1

fa cagare con garmin edge 1030 lo riconosce quando gli pare e se la temperatura va in negativo è sempre in searching cosi scarica veloce la batteria dell edge fa schifo!

Pete
11 de diciembre de 2020 | Versión 0.1.1

Crashes whenever the Edge unit laps, but if you don't press the lap button and disable auto-lap then it's great!

Dupuis Gilbert
4 de noviembre de 2020 | Versión 0.1.1

Bonjour, dommage que la taille des caractères est un peu trop petite sur l'Edge 130

vojta66
28 de octubre de 2020 | Versión 0.1.1

To keep it working not only 5 mins you have to delete lap count!!

Bob Baumeister
16 de octubre de 2020 | Versión 0.1.1

I want to use the Tempe Sensor with Garmin 130. Installation has worked. At each start the "Tempe Datafield" must be selected again, so that the temperature is unfortunately only transmitted for a certain time. Then only the IQ symbol is displayed. Unfortunately it does not work on the Garmin 130. Too bad, because the Tempe sensor would give me a more accurate temperature in winter.

John Ratsey
2 de octubre de 2020 | Versión 0.1.1

Excellent idea but version 0.1.1 stops receiving data from the Tempe after working for about 5 minutes. Same behaviour on both an Edge 520 and Edge 1030.

Elcio Antonio Cruciol Junior
1 de octubre de 2020 | Versión 0.1.1

Datafield stops working after about 12 minutes.

Paul Terpstra
27 de septiembre de 2020 | Versión 0.1.1

What a great idea! It was on my wish list to see the Tempe on my Edge Explore. What Garmin refuses to make available, you succeeded with this app.

PeterKlaassen
5 de septiembre de 2020 | Versión 0.1.1

The only thing that was missing on my Edge Explore! You're a hero.

Stefan
31 de agosto de 2020 | Versión 0.1.1

A very cool data field - thank you crt_hun for that! Also works great with multiple Tempe-Sensors on the Edge 830 (V6.00) and Edge 130. I have a sensor installed on every bike and don't have to switch each time like on the fenix3. The edge temperature can also be seen on the home screen if necessary.

Olivier Raggi
31 de agosto de 2020 | Versión 0.1.1

Thanks crt_hun for this useful datafield! It works with my Edge 130 Plus (v2.60). Enhancement Idea: display min and max temperatures like on legacy/native widgets.

Lo sentimos, aún no hay estadísticas disponibles.