App Icon

Running Power

Descripción

This app displays your current running power. If you are new to training with running power, try this one first.</p><p></p><p>For years, elite cyclists have used power data as the most reliable way to measure the actual exercise loads of their rides. Now runners can train with power, too. Developed by Garmin Labs, the Running Power apps let you tap into metrics collected by your compatible Garm...

Novedades

Changes made from version 1.20 to 1.30:</p><p>- Support for the fenix5/5s/5x Plus series</p><p></p><p>Changes made from version 1.10 to 1.20:</p><p>- Support for the Forerunner 935 APAC and fenix5/5s/5x APAC</p><p></p><p>Changes made from version 1.00 to 1.10:</p><p>- Support for the Forerunner 645 and Forerunner 645 Music</p><p>- Support for display of power on 3rd party websites</p><p>- Fixed...

Información adicional

Permisos

Esta aplicación requiere acceso a:

  • Enviar/recibir datos mediante la radio ANT con sensores de terceros
  • Ejecutar en segundo plano cuando no está activa (podría afectar la autonomía de la batería)
  • Enviar/recibir información a/desde Internet
  • Registrar información adicional en archivos de actividad
  • Frecuencia cardiaca, barómetro, temperatura e historial de altitud
  • Tu perfil de fitness de Garmin Connect™
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
Calificación media: (38 calificaciones)

Pablo de las Heras
13 de diciembre de 2018

As Juan Maria Jiménez said on December 4th, I have de same problem with my Fenix 5. If you need it, I can send you pictures of this problem. I imagine this is a software mistake but if only it was solved as soon as possible. If it wasn't for this problem, I would give 6 stars without doubt.

Juan Maria Jimenez
4 de diciembre de 2018

Good morning, There is a problem with the Garmin Labs applications with the watts in Garmin and it is the following. when I do series, with LAPS, when I look at the summary, it does not take out the average watts of the LAP ... In the graph I'm going to 450 watts, but then the average of the series comes out at 380 watts. It would be fine, that this ruling will be solved. Understand the problem. If you leave me an email I would send the images.

Syam Tawakkal
4 de diciembre de 2018

Not working on fenix 5x plus. Disappointing..

Sotiris Diamantopoulos
2 de diciembre de 2018

Please provide an option to smooth values. In its current implementation, running power is only useful as a post-exercise tool. Trying to use it in real time, as I run, power values are fluctuating too much to be of any use. Essentially, I am trying to smooth the values myself, averaging the last 3 seconds, which is the last thing a runner needs to do while running or racing. An option to smooth values with a variable smoothing window (e.g. 3-10s) would render this datafield much more useful.

Ralph
30 de noviembre de 2018

I really do like to have the running with Power option on Garmin. Unfortunately very little is published and google only finds over and over the same reviews .... I read a lot about running on power on: https://thesecretofrunning.com/wp-content/uploads/2018/01/31-Second-test-of-Garmin.pdf and their theory is very solid. They can exactly calculate the power numbers and confirm stryd values. Your numbers seem to follow a different approach and the watts are approx 30% higher. I would appreciate if you can add a config option to select which power model to follow. This would allow to follow training plans designed for the power ranges displayed by stryd. Thanks for a brief answer and considering for an update release ! Would be nice to have for the spring training season ;)

Krzysiek
21 de noviembre de 2018

Good app! Just one question - need some guidance on setting the zones. Can anbody help? ☺

RafaelMonge
5 de noviembre de 2018

Hello good day I write to you in relation to the "app running power" I would like to train with the power parameter while I run, but currently it is not possible to set up training with power. I give an example done with trainingpeaks: Workout Details Warm up 2.00 km @ 277-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Active 3.00 km @ 415-454 W Zone 4 - Threshold-Zone 5 - High Intensity Recovery 1.50 km @ 296-336 W Zone 1 - Recovery / Walking-Zone 2 - Endurance Cool Down 1.00 km @ 198-237 W Zone 1 - Recovery / Walking Is there any way for fenix 5 to warn me that I am within the correct range of power at each step?

Mars
27 de octubre de 2018

I have a Fenix 5 plus and it works well. From my runs with both the RD Pod and Stryd the readings give different numbers, but the overall curves follow similar patterns. I don't understand why the RD Pod can't give pacing information like Stryd. My suggestion would be for this app to work with any power sensor. I'd use the power gauge data field instead of Stryd's Race Power which I really don't like.

Stephen Hagan
9 de octubre de 2018

Doesn't appear to be working with my Fenix 5x.

Mika Särkelä
7 de octubre de 2018

This could be useful with the wind compensation, but I have tried all the tricks and it remains disabled. I am based in Finland and I can't find the geographical coverage of wind stations anywhere, is that information provided somewhere?

Marc
1 de octubre de 2018

Don't do it! Training peaks will give crazy TSS scores instead of rTSS!

doh
21 de septiembre de 2018

Cada vez me sorprendo más con las posibilidades que ofrecen. Ésta es una de ellas. Con el hrm run y un fr 645 music, excelente.

yannlux
18 de agosto de 2018

Works perfectly. Don't believe people comparing to stryd, ratio with cycling is not making any sense (run must be more difficult as not carried by the bike) Multiple comments with plus are not making sense, is he only wearing a chest strap.

George Whitehouse
9 de agosto de 2018

Yep not working on 5x plus. Disappointing.

Fatty Boomboom
6 de agosto de 2018

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Fatty Boomboom
6 de agosto de 2018

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Fatty Boomboom
6 de agosto de 2018

Totally not working with plus series, despite the compatibility listing. I will update it again once it works.

Anders
23 de julio de 2018

Rd pod shows higher than hrm-strap and even more against stryd. Rd pod gives"better" results in everything it calculate.

Nick______H
2 de julio de 2018

When using hrm run this gives readings 20-30% higher than stryd. I believe the stryd values given they align to my cycling power. Give it a try but don’t trust the data with this version. Would be interesting to know how it works with the garmin rd foot pod (stryd is great but not waterproof)

Lo sentimos, aún no hay estadísticas disponibles.