Now with Open Weather Map data!</p><p>NOTE: to access weather data, it MUST be a watch running CIQ 2 or 3, so won't work on things like the forerunner 23x,630, the fenix 3 devices, and similar, such as the D2 Bravo</p><p>You need an APIkey to use the OWM data. Please see https://openweathermap.org/appid</p><p></p><p>To set your APIkey for the app, you use App Settings. Here's a basic "How to" for that: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store</p>
0.21 - added Open Weather Map data, support for the va3 Music LTE (including an icon for when LTE is connected)</p><p>0.19 -added setting for leading zero in hours (disables AM/PM in 12hr mode)</p><p>0.17 - added icons for data fields. Set "ID used in DFs" to Icons if needed. Make sure the new version is installed or you won't see icons
Esta aplicación requiere acceso a:
Approach® S60
Approach® S62
Captain Marvel
D2™ Air
D2™ Charlie
D2™ Delta
D2™ Delta PX
D2™ Delta S
Darth Vader™
Descent™ Mk1
Descent™ MK2, Descent™MK2i
Descent™ Mk2S
First Avenger
Forerunner® 245
Forerunner® 245 Music
Forerunner® 645
Forerunner® 645 Music
Forerunner® 745
Forerunner® 935
Forerunner® 945
Forerunner® 945 LTE
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® 6
fēnix® 6 Dual Power
fēnix® 6 Pro, fēnix® 6 Sapphire
fēnix® 6 Pro Dual Power
fēnix® 6 Pro Solar
fēnix® 6 Solar
fēnix® 6S
fēnix® 6S Dual Power
fēnix® 6S Pro, fēnix® 6S Sapphire
fēnix® 6S Pro Dual Power
fēnix® 6S Pro Solar
fēnix® 6S Solar
fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
fēnix® Chronos
MARQ™ Adventurer
MARQ™ Athlete
MARQ™ Aviator
MARQ™ Captain, MARQ™ Captain: American Magic Edition
MARQ™ Commander
MARQ™ Driver
MARQ™ Expedition
MARQ™ Golfer
Mercedes-Benz Venu®
quatix® 6
quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
Rey™
Venu®
Venu® Sq.
Venu® Sq. Music
vívoactive® 3
vívoactive® 3 Mercedes-Benz® Collection
vívoactive® 3 Music
vívoactive® 4, GarminActive
vívoactive® 4S, GarminActive S
vívolife
William Ashworth
8 de marzo de 2021 | Versión 0.24
I would make this my standard watch if I could read the battery icon and per cent. They need to be at least twice as large to be legible. Too bad.
Michael Oliver
23 de febrero de 2021 | Versión 0.24
One of my favourite watch faces for the Venu Sq, all info clearly displayed and easy to read. My only request would be to be able to make the fonts larger in the fields.
Zoe Ali
30 de octubre de 2020 | Versión 0.24
all good so far except the temperature has stopped displaying. how do i get the temperature back?
Respuesta del desarrollador
30 de octubre de 2020, jim_m_58
If the field isn't being displayed, use https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store to set it to be displayed. If it's just showing "--", change a field to be OWM Status", and use contact developer to let me know what it says. -104 for example, means the phone isn't connected when the watch face is trying to get an update.
Anthony Turvey
25 de octubre de 2020 | Versión 0.24
This really is a great watch face. Extremely clear, useful and efficient. Thank you to the developer!! I especially love the OWM data fields. I had to do some searching to figure out what it was all about, but wow what a great feature. BTW, why does the OWM barometric pressure field always stay yellow? I assume green means valid data (?) and temperature does update to green. But pressure is always yellow. Does that have a different meaning? Also it seems some very basic documentation would add to the value. I had to read the reviews to figure out what the move bar was. Anyway, very nice WF, please continue to develop and maintain this one. Thank you!
martijn reinalda
20 de mayo de 2020 | Versión 0.23.2
My favorite sofar, wish there was an option to make the data and battery field a bit larger and the time a bit smaller. And I’m still unsure what the dotted line at the botttom indicates
Respuesta del desarrollador
20 de mayo de 2020, jim_m_58
The line at the bottom - a large segment and up to 4 smaller ones is your "move bar". The larger part displays after too few steps in an hour, and the smaller ones, for each additional 15 minutes. To clear them all, walk 200 steps without stopping.
Gordon
13 de febrero de 2020 | Versión 0.23.2
Michal
12 de febrero de 2020 | Versión 0.23.2
It is GREAT and very clear watch face! Any possibility to get dd-mm-yy date on info field? and then disable date below time to get it bigger?
Jack
25 de septiembre de 2019 | Versión 0.23.1
Very nice watch face. Simply enough information are shown. Very easy to configure. Thanks.
Mark Wade
22 de agosto de 2019 | Versión 0.22.2
This is awesome, love it, perfect combination of Easy-to-Read customizable and not too much going on!
Mike Adderley
12 de febrero de 2019 | Versión 0.21
OWM Widget works but when I use this watch face the temp and current conditions from the OWM do NOT work...
Robyn Kane-Berman
23 de julio de 2018 | Versión 0.18-upd1
Great watch face - thank-you. How do I get the colours on the face as in the photo, please? I only have black, white and the step counter in purple,
David Giraldo
26 de junio de 2018 | Versión 0.18-upd1
Minimal yet efficient. I love it. EXACTLY what I was looking for. The other version just had too many data points to look at. One thing though, what the heck is that purple bar above the battery icon????
Jayakumar R 🇮🇳
6 de junio de 2018 | Versión 0.18
Very simple configuration interface... Good use of real estate. Love it! The only thing I am not sure of is the exclamation mark next to the Bluetooth icon. Is there a way to make it work or remove it in vivoactive 3?
Noel SUP
14 de mayo de 2018 | Versión 0.17
Great watch! Looks great with lots of DFs clearly presented. Thanks!
Ungvári Gergő
23 de abril de 2018 | Versión 0.17
Pretty awesome watch face! The only thing, that I really miss is the seconds indication. Sometimes it shows up, sometimes it goes away. I would really appreciate, if you could fix it and make it available at all times. Other than that, highly recommended!
Respuesta del desarrollador
23 de abril de 2018, jim_m_58
Seconds are only displayed all the time on the newer watches, aand for example, on the Fenix3 and d2bravo, will only display for about 10 seconds after a gesture. It's a matter of the hardware itself, so nothing can be done in the code to change this.
sandra brunner
8 de abril de 2018 | Versión 0.17
i have 1 question.. if i set moonrise it shows Wan C. what does this mean? lovely regards sandra
Cairn
13 de marzo de 2018 | Versión 0.15.1-upd1
This is the best face, for me that I've tried (and I've tried all of them as of March 2018). One feature request would be to have the option of a character/graphic for some of the fields. E.g. a heart for pulse, little man walking for steps, etc.
Rick Mitchell
19 de enero de 2018 | Versión 0.15
Thanks for the 30 min option on time zones! Took this already awesome face to an even higher level.
Lo sentimos, aún no hay estadísticas disponibles.
Watch Face