Temperature and Pressure

Clive Webber
31 de diciembre de 2018 | Versión 0.15

Great app! I use it all the time. I wish it could support more hours of data (ie up to 48 hrs) for the barometer, but my guess is that's a limitation of the watch firmware, not the app (at least on my Vivoactive HR). If anyone is looking for the optimal colour schemes (the app is customizable), I find black background, light grey temperature and white air pressure offers a good amount of contrast between the three, so you can easily read the text and see the two graphs... it's not perfect but so far it's the best I've found. If the developer would like a couple suggestions: 1) Could there be a timeline at the bottom of the graph (to remind users that it's 4 hrs of data, and to help determine when temp/pres changes occurred)? At the very least 4 bars or dots to indicate each hour would really help. 2) The way the barometer data is displayed makes it appear as though the air pressure is very unstable. In other words, even if the pressure increases/decreases just a little over the 4 hrs, the graph is drawn to show a massive climb/drop, using the entire "y axis". Would it be possible to have an option for the y axis to remain constant (eg from 940 to 1060 mbar)? That way if the pressure is only changing a little, it will show a mostly straight line.. or if I see the pressure dropping, I know it's a significant change. Thanks!!

Alessandro
4 de junio de 2018 | Versión 0.15

Il mio vivoactive hr non indica i dati della pressione, mostra solo la temperatura

A
2 de marzo de 2018 | Versión 0.15

The app works fine on VA3. Even though the colors are configurable, the units aren't (I'd need the pressure to be in mmHg). The pressure at the sea level does not seem to be adequate if you live far from a sea coast.

Stefano Cornia
16 de febrero de 2018 | Versión 0.15

The app could be ok but it doesn't work on vivoactive 3

RMS
6 de febrero de 2018 | Versión 0.15

You should inform people, who wish to download your app, that the temp measurement is "body" temp not outdoor temp unless, of course, you leave your watch outside un-attached to one's wrist. PS

Doma G
28 de enero de 2018 | Versión 0.15

Hi, the widget is nice, but a I have a question. Is the pressure at sea level? Always dial 1034-1037 Mb regardless of whether I am 800 meters altitude or 2000 meters. Best regards. Tomás

andre behar
15 de enero de 2018 | Versión 0.14.1-upd

hello great App but cant u make it for longer periods of time i would love to see a weekly , monthly or even yearly or more temp scale! thx!

MB201
26 de diciembre de 2017 | Versión 0.14.1-upd

No display of pressure with software 4.30 for me. Shows 0.30 - 0.40, nothing relayed to hPa.

Сергей
5 de diciembre de 2017 | Versión 0.14.1-upd

Не показывает давление после последнего обновления. Vivoactiv hr.

Ed
11 de octubre de 2017 | Versión 0.14.1

Hi, simple, effective widget, thank you. Only query is how come there is no scale for the temperature. Any chance you could add a scale or annotate the high/low temperatures? Thanks

Chris Schwichtenberg
3 de octubre de 2017 | Versión 0.14.1

The temp is way off on my Vivoactive 3. 30 Degrees off. Pressure seems right. Am I missing a setting for location?

Nick Gill
1 de abril de 2017 | Versión 0.10a

I agree with the comments regarding doing only 3 lines to increase font size. Perhaps temp on the left, pressure on the right, top to bottom showing high, now and low, with now being highlighted. Also agree that being able to fix the scales in settings would be very useful. Finally, would love to be able to apply a fixed altitude compensator so the pressure becomes more useful, being that at sea level. I live 960m above sea level so a reading of 910mb (actual) is not as useful as 1011mb (the compensated reading). Otherwise, great widget and very useful. Thanks for developing it.

danchyo
25 de marzo de 2017 | Versión 0.10a

Thanks for providing app. This worked great, however currently the pressure part shows "nan". What does this mean? Something wrong?

philc5987
19 de marzo de 2017 | Versión 0.10a

can you make the font size customizable? it a little small to see clearly...

Kovács József
20 de enero de 2017 | Versión 0.10a

The displayed current pressure is lower than real barometric pressure compared to WU PWS and the other barometer widget. The differences is about 18 mbars.

Pat
13 de enero de 2017 | Versión 0.10a

1) A nag screen with an icon and the name of the widget??? c'mon please remove that. 2) about scales: The dynamic Y axe from minimum to maximum would be a good approach for a secondary (zoom in) screen; I think the main screen should include a fixed Y scale i.e. from -10 C to +40 C ( 14F to 104F) the same for pressure. 3) Read outs: a) please remove the line with the name and version of the widget. b) remove "lo:" and "hi": just write the 3 values vertically like 77.0 26.91 70.3 25.43 68.3 25.45 and their unit C or F, etc. This way you just use 3 lines of text instead of 5; that means more room for a bigger/more readable font. c) A bigger/more readable font is a must. For the rest very good widget. Thanks, Patrick

Sketchtank
20 de noviembre de 2016 | Versión 0.10a

On my Garmin vivoactive hr the temperature is not correct neither if I consider the data as celsius, neither if I consider it as farenheit. How should I read the temperature?

Sirirat Traiviratana
16 de septiembre de 2016 | Versión 0.10a

Work great! Just what I was looking for. If you could add some small scale of temp and time similar to the default heart rate widget and with bigger numbers, it would be perfect

Ronomy
13 de septiembre de 2016 | Versión 0.10a

Love it! Keep it one swipe from my simple heart or graph sometimes watch face!

Paris Georgiades
10 de septiembre de 2016 | Versión 0.10a

What i missed from my casio, you gave it to me. Thank you for the super widget. If you can add a forecast icon like sun - clouds - rain it will be awesome