ErgIQ

Nader C
10 de octubre de 2019 | Versión 1.4.0

Installed. NO instructions how to use with concept2 v5. Can some one please share details on WhatsApp +92 320 2910640 thanks

Clif Hooper
10 de octubre de 2019 | Versión 1.4.0

Easy connection from my 935 to PM5 but distance rowed doesn't transfer to Garmin... That's a pretty critical piece of data and it shows up while rowing so why isn't it logging distance?

Alvaro Baeza
7 de octubre de 2019 | Versión 1.4.0

Great app and it does connect and works with Waterrower Bluetooth Com Module.

Neil Byatt
29 de septiembre de 2019 | Versión 1.4.0

Almost there, a few bits of data that don't get ported directly into Connect. Would be 5 star if distance, stroke counts etc were ported to. Hopefully address in future updates?

Zlatko
25 de septiembre de 2019 | Versión 1.4.0

In transfer of data from Concept2 after activity i have lost qty. of strokes and some data. Sometimes need several times to connect My Fenix 3 HR with the Concept 2 gear. Concept 2 connect my HR belt normally but connection Fenix with Concept is not good.

Damiano
10 de septiembre de 2019 | Versión 1.3.6

Purtroppo non è precisa i dati differiscono di tanto da quelli reali

FishNChips
9 de septiembre de 2019 | Versión 1.3.6

Tried it first time today, with Fenix 3 watch. Connected to the machine quickly, worked well during the exercise and uploaded the activity to Garmin Connect without problems. A few problems: * When I disconnected the rowing machine, the watch restarted (ErgIQ crashed?) * The total distance in the activity is 0, but the actual distance is recorded in Connect IQ distance field * I have not figured out how / if is it possible to upload the activity to Concept2 Logbook.

Gavin Tweddle
5 de septiembre de 2019 | Versión 1.3.6

I like the idea, BUT can't get it to connect to the PM5, I will try manual change the settings (ergo ID) through the app and see if that works. Garmin Fenix 3 (No Wrist HR) Software Version 9.40

Fesalo
4 de septiembre de 2019 | Versión 1.3.6

A very good beginning. It needs to be improved, but the idea to have every data in Garmin Connect...AMAZING

xbo
27 de agosto de 2019 | Versión 1.3.5.1

Hello, I have a Garmin Forerunner 935, v13.40.0.0. With this new version and your application ErgIQ, it seems I am not able to get all the detailed & customs "xx IQ" fields when my activity in synced with Garmin Connect (I only get the regular fields). All graphical SpeedIQ, PowerIQ, StrokeRateIQ are Ok (not HeartRateIQ), but all the other ConnectIQ fileds are not synced at all (DistanceIQ, AvgSpeedIQ, AvgPowerIQ...). This is a big issue for me as I don't know at all the distance I skied etc... This is Ok with the 13.30.0.0. Could you please contact Garmin and raise them this issue? thanks!

Sascha
20 de agosto de 2019 | Versión 1.3.5.1

The app itself is good but it doesn't work well with the Fenix5x. The IQ data is stored correctly but somehow the device itself is not recording the activity correctly. The number of strokes is off and so is the heart rate. For example, today I was doing 7 x1000 m intervals and was going deeply into my anaerobic zone. In the IQ data this was recorded correctly. The watch just recorded a heart rate max of 120 bpm and an average of 110 bpm. As result, the training effort, aerobic as well as anaerobic, was calculated to be almost nil, while I lay on the ground pumping... Seems like when the heart rate monitor is connected to the PM5, the watch falls back on the diodes when ErgIQ is running and records crap. I will discontinue the PM5 and ErgIQ experiment, until Garmin properly accepts the Concept2 data as reliable. Too bad, but the app itself is fine.

Nathan Eger
8 de agosto de 2019 | Versión 1.3.5.1

Works great on my Fenix 5 and Pixel. Thanks for the dev work on this app.

mikej.1981
29 de julio de 2019 | Versión 1.3.5.1

The android app works and transfers distance and you get a handy photo of the rower data screen distances. This does not. So quite poor

Wojciech Urbanowski
9 de julio de 2019 | Versión 1.3.5.1

Z Garminem 735XT niestety nie działa.

Claus Ziegler
7 de julio de 2019 | Versión 1.3.5.1

It is working quite good with my concept 2 rowing machine. You need to read the instructions. the total rowing distance IS tranfered but not in a obvious area. If you go in the activity to the Detail page you can find it! I alos would like to be able to specify to top 3 values on the 1st page. Time is ok, but i do not need the number of strokes or the calories. Not sure whether I can adjust this by myself or whether this needs to be managed in the program?

Juan Pascual Perez Moner
5 de julio de 2019 | Versión 1.3.5.1

La aplicación no funciona , se queda congelada al entrar y no puedes iniciar el ejercicio

Nader C
26 de mayo de 2019 | Versión 1.3.4

I downloaded the app but will not start. Can some one please assist thanks [email protected]

Adam Verbeeck
18 de abril de 2019 | Versión 1.3.4

I love the concept of the app but I would greatly appreciate it if total distance would show up in the statistics. However, I see this has been an issue since the Initial Release of this app which makes me wonder if this is even still being maintained. If updated to include the missing stats I'd gladly adjust my score to 5 stars.

Ente
12 de abril de 2019 | Versión 1.3.4

Standard fields don't get populated (like with the native app), but that seems to be a problem on Garmin's side - would be nice if they get fixed. Otherwise very much an improvement on the standard app with automatic start/stop and perfect pairing. Thank you!

Mikael Jonsson
6 de abril de 2019 | Versión 1.3.4

Your respons on earlier review about distans don't shows. "The distance is located in the ConnectIQ section in the bottom. Garmin doesn't allow the developers to replace the base fields Garmin controls." But I use Zwift for running and riding on mutiple platform and it does, as do Concept2, I hade other apps (not any more) where the app could fill out all data fields for the activity typ that was recorded and pushed to Garmin.

Vladimir Kocian
27 de marzo de 2019 | Versión 1.3.4

when you use the default indoor rowing app, you have more data. useless app.

David Oxley
25 de marzo de 2019 | Versión 1.3.4

Brilliant! This app is now very stable and works reliably with my FR935 and PM5, whether I do a set piece row or Just Row. As the dev notes, it's a pity the ConnectIQ Distance and other data don't natively integrate into Garmin Connect, but at least you can edit the Distance after the row and it then calculates your pace. Thank you lcj2 :-)

SAF1981
16 de marzo de 2019 | Versión 1.3.4

I don't normally write reviews but this app is definitely worth it. Its a great tool to sync with Concept2 and gives seamless data. Brilliant training tool, kudos to the developers

Marc Hansen
12 de marzo de 2019 | Versión 1.3.4

Verbindung zum pm5 klappt. Leider wird nur die Zeit zu Connect übertragen.

Heikki Vierelä
10 de marzo de 2019 | Versión 1.3.4

Very poor execution. Who needs distance, pace, rate, stroke length etc... Have you ever talked to a rower?