App Icon

Graphic Cycling Dashboard with Power Meter


[~ TIPS: Because one device only allow to connect to same device once, so if you want to configure PowerMeter Sensor ID manually, and show Balance/TE/PS, you need to disable Edge internal PowerMeter pairing ~]</p><p>-</p><p>Due to limitation of Memory size on Edge 520, I have create a Lite version.</p><p>Compared to FULL version:</p><p>1. Lite version does NOT support PowerBalance/TorqueEfficiency/Pedal Smoothness and Garmin Vector Phase graphic;</p>


Versions:</p><p>v1.7.8: Fix the crash issue on Edge 820 with 6.3 or later firmware. Fix the cadence not be shown if no power meter applied.</p><p>v1.7: BIG UPDATE! In this build, if setting PowerMeter ID as 0 will share system Power data including Effectiveness, Smoothness, and will base on Eff/Smooth to simulation calculate PowerPhase value. Which means that, like Stages meter also can show Phase graph! (ONLY requires Eff/Smooth value). But NOTICE that, it will ALWAYS use simulation PowerPhase value, so if you use Garmin Vector and want to see ACTUAL meter phase value, you still need to configure PowerMeter ID and disable system power meter. (Simulation data shown as GREEN and actual data shown as BLUE)</p>

Información adicional


Esta aplicación requiere acceso a:

  • Enviar/recibir datos mediante la radio ANT con sensores de terceros
  • Tu perfil de fitness de Garmin Connect™
  • Edge® 1000 Edge® 1000
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Calificación media: (24 calificaciones)

18 de abril de 2019 | Versión v1.7.8

很好的盘面,请问末来会考虑加入用速度和踏频,和各个齿轮的参数来计算出目前大概齿轮档位的功能吗? 如果能加上就更好了

22 de agosto de 2017 | Versión v1.7.8

I have contacted the developer to see how to change between the 4 different interfaces but have not heard anything back. Not sure if he/she is still updating it or not.

7 de mayo de 2017 | Versión v1.7.8

Great Tool!

27 de marzo de 2017 | Versión v1.7.8


Respuesta del desarrollador
27 de marzo de 2017, QQSTARS


15 de marzo de 2017 | Versión v1.7.6


Respuesta del desarrollador
20 de marzo de 2017, QQSTARS

最新的版本其实不需要屏蔽了。只不过如果你想使用真实的Garmin Vector相位数据才需要屏蔽功率计的系统配对。在传感器里找到功率计,把启用点掉就行了。

Albert Hichon
5 de marzo de 2017 | Versión v1.7.3

Existe t'il une version lite pour le bord 1000 comme sur le 520 car je n'ai pas de capteur de puissance ni de balance.

Christopher Olbekson
5 de marzo de 2017 | Versión v1.7.3

I've had nothing but trouble using this on my Garmin Edge 820. First ride it crashed and froze my Garmin about 10 miles into my ride. It also prevented my power meter from connecting to my unit. I had to remove the app to get my power meter to be able to pair again.

Respuesta del desarrollador
6 de marzo de 2017, QQSTARS

If anybody met any problem, you can click "contact developer" and send the log file under "GarminAppLogs" folder. Rating low can HELP NOTHING.

18 de noviembre de 2016 | Versión v1.6.6

怎么调成中文,我的是英文 用的佳明1000

Respuesta del desarrollador
5 de marzo de 2017, QQSTARS


5 de noviembre de 2016 | Versión v1.6.6

like it. average speed is missing, and in some rides it took over the power meter and although i coud see the readings during the ride, they were not registered for the whole ride. other data was. I use garmin vector.

1 de noviembre de 2016 | Versión v1.6.6

Is it Possible to add some indicator for Average Speed in the Speed Meter? e.g. a Solid Circle or Point in the Speed meter Bar

6 de octubre de 2016 | Versión v1.6.6


Matt B
1 de octubre de 2016 | Versión v1.6.6

Love this screen - it's become my default for most rides. Areas for improvement: The small text could be a little bigger - the speed doesn't need to be so big. The Garmin Express settings page is a bit confusing and the auto-calculate values don't seem to work when a zero is in auto calc box. My main issue is with the slope readout, which I use a lot. On a Garmin page, this seems to be a smoothed value, but in this screen it jumps all over the place. e.g. on a steady climb of 5% it can vary from 1% to 9% and everywhere in between across a 1-2 second period. Hitting a short 12% climb can cause it to jump above 20%.

29 de septiembre de 2016 | Versión v1.6.6

Like it! One thing that I found out inconvenient when using this as commute is that the font for Gear Ratio is too small to read during cycling. I would prefer the gear ratio to swap with the speed. I can tell the speed roughly by looking at the color of the speedometer. The word doesn't provide a lot more information. Where as if you swap the speed with the gear ratio, it helps to determine when I need to shift.

11 de septiembre de 2016 | Versión v1.6.6

Like the app! However, when disabling Edge internal PowerMeter pairing the Watt figures (coming from my Favero BePro pedals) are constantly 30-40 Watt higher than what my Tracx Vortex trainer. Enabling the pedals in my Edge 1000 again the wattages are back to normal (low difference between pedals and trainer). Could it be that the crank length get incorrect when pedals are disabled? Another thing. In order for my Edge to connect to the pedals again i both needed to Enable them, but also delete the app from the training profile. When all was back up I could att the app in a data screen again. Really bad Garmin does not give access to advanced metrics!

Respuesta del desarrollador
11 de septiembre de 2016, QQSTARS

Yeah, that is the current pain point. All values read comes from Garmin, but if want to show PS/TE/Phase, we had to talk to power meter directly. So many kinds of PM on market so it is hard to maintain them in same level. Generally say, customize Power Meter ID only suggested for those who use Vector PM.

Gino Grossi
7 de septiembre de 2016 | Versión v1.6.6

Very nice APP. Full of usefull fields and grafics. One problem: once I uploaded the activity in garmin connect mobile there was no power data recorded. Wrong setting or what?

Respuesta del desarrollador
8 de septiembre de 2016, QQSTARS

As I describe in description, because Garmin does not provide me advanced power value, so if you want to show like Balance/TE/PS, you need to configure Power Sensor Id. The disadvantage is, the value will NOT recorded. So, if you want to record power value with showing balance/TE/PS, please send request to Garmin let them add support Balance/TE/PS/Phase in CIQ SDK. I believe more members require the same function can push them add the support so I don't need to use workaround to do so.

25 de agosto de 2016 | Versión v1.6.5

请问,说的:其他Zone的数值保持为0,那么---below area set to 0---- 这一段下面有个输入框,里面输入啥

Respuesta del desarrollador
28 de agosto de 2016, QQSTARS


21 de agosto de 2016 | Versión v1.5.5

May I confirm the GEAR display function support SRAM eTAP or NOT? Seems not so work for my eTAP! Beside on this, everything are good and very nice! Great Developer!

Respuesta del desarrollador
21 de agosto de 2016, QQSTARS

I am not sure right now, the value provided by Garmin. So I believe even it NOT supported now, following firmware updated, eTAP will be supported.

18 de agosto de 2016 | Versión v1.5.5

Clear or small.... depends on how good are your eyes, I use reading glasses, but when riding I don't, the std size for a garmin field I see it without issues, yours are...., too small for me, unreadable I'm afraid I don't use any different config than the std one in english, so the font is the std one. My advise, the speedometer looks really huge in comparison to the rest, when IMO, speed is a secondary metric, importance for me is, in order, Power, HR, Cadence, Grade, Speed + of course the tipical Gear/distance/altitude/time. Speed is fancy, but not really that important. Keep on the nice job

Respuesta del desarrollador
21 de agosto de 2016, QQSTARS

The numbers become larger after v1.6.0

4 de agosto de 2016 | Versión v1.4.5

Good improvement with the stages PM :) - tks Some more improvements, the letters are still too small for all the info except for the speed, maybe making the speed section smaller would allow making the rest of the data bigger/more visible

Respuesta del desarrollador
10 de agosto de 2016, QQSTARS

Thanks your reply. I tried on S-Chinese device, everything is clear, not too small. I am not sure what system font you have. If that is possible, you can send me your actual screen shot. Additionally, the title set to very small because the position will NOT changed and we just need to focus on the color and the number.

1 de agosto de 2016 | Versión v1.2.4.Test3

很好…不過使用edge 1000最底層基本上用不到 有點浪費顯示資訊的空間,可以的話改成其他的吧

31 de julio de 2016 | Versión v0.53

looking very promising. some ideas for improvement - I have a stages PM, so the lower section is no use, can you make the lite version available for edge 1000 too? - Readability needs improvement, letters are too small, maybe with the lite version for the edge 1000 this gets fixed?

31 de julio de 2016 | Versión v0.51

Letters are very small and difficult to read while biking. If PM in crank like stages cycling dynamics are useless an needs only space. Why not possible to use Lite version on Edge 1000 too?

29 de julio de 2016 | Versión 0.4.1


Lo sentimos, aún no hay estadísticas disponibles.