Discover, Improve, Perform with Xert Breakthrough Training. Register at www.xertonline.com.</p><p></p><p>Using your Xert™ Fitness Signature, real-time MPA (Maximal Power Available) is calculated and displayed. Get immediate feedback on your progress when you receive a fitness breakthrough medal for exceeding your MPA.</p><p></p><p>In addition, a colour-coded power display enables quick view of your current power output:</p>
v3.0 *** Automatic Fitness Signature Updates!!! *** Be sure to use Garmin Express or Garmin Connect Mobile to configure your username and password.</p><p>Indicator: Green = Signature Updated, Amber = In process (Update in less than 5 minutes), Red = Error - Invalid Username/Password (Indicator only shows on full width display).</p><p>v.3.4.1 Support for New Devices
Esta aplicación requiere acceso a:
Edge® 1000
Edge® 1030
Edge® 1030 Plus
Edge® 1030, Bontrager
Edge® 1040
Edge® 130
Edge® 130 Plus
Edge® 520
Edge® 520 Plus
Edge® 530
Edge® 540
Edge® 820
Edge® 830
Edge® 840
Edge® Explore 1000
Edge® Explore 820
Enduro™ 2
epix™ (Gen 2), quatix® 7 – Sapphire Edition
ForeAthlete® 735XTJ
Forerunner® 255
Forerunner® 735XT
Forerunner® 745
Forerunner® 935
Forerunner® 945
Forerunner® 945 LTE
Forerunner® 955, Forerunner® 955 Solar
Forerunner® 965
fēnix® 5, quatix® 5
fēnix® 5 Plus
fēnix® 5S
fēnix® 5S Plus
fēnix® 5X, tactix® Charlie
fēnix® 5X Plus
fēnix® 6
fēnix® 6 Dual Power
fēnix® 6 Pro, fēnix® 6 Sapphire
fēnix® 6 Pro Dual Power
fēnix® 6 Pro Solar
fēnix® 6 Solar
fēnix® 6S
fēnix® 6S Dual Power
fēnix® 6S Pro, fēnix® 6S Sapphire
fēnix® 6S Pro Dual Power
fēnix® 6S Pro Solar
fēnix® 6S Solar
fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballistics
fēnix® 7, fēnix® 7– Sapphire Solar Edition, fēnix® 7 Solar, quatix® 7
fēnix® 7 Pro, fēnix® 7 Pro – Solar Edition, fēnix® 7 Pro – Sapphire Solar Edition
fēnix® 7 Pro – Solar Edition (No Wi-Fi®)
fēnix® 7S, fēnix® 7S– Solar Edition, fēnix® 7S– Sapphire Solar Edition
fēnix® 7S Pro, fēnix® 7S Pro– Sapphire Solar Edition
fēnix® 7X, fēnix® 7X - Solar Edition, fēnix® 7X– Sapphire Solar Edition, quatix® 7X – Solar Edition
fēnix® 7X Pro, fēnix® 7X Pro– Sapphire Solar Edition
fēnix® 7X Pro No Wi-Fi
fēnix® Chronos
Instinct® 2, Instinct® 2 - Camo Edition, Instinct® 2 Solar - Tactical Edition, Instinct® 2 Solar - Surf Edition, Instinct® 2 - dēzl™ Edition
Instinct® 2S, Instinct® 2S - Camo Edition, Instinct® 2S Solar - Tactical Edition, Instinct® 2S Solar - Surf Edition, Instinct® 2S - dēzl™ Edition
Instinct® 2X
quatix® 6
quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
tactix® 7, tactix® 7 – Pro Ballistics Edition, tactix® 7 – Pro Edition
Steffen Geillinger
5 de febrero de 2022 |
Versión 3.3.4
Eines der besten Addons finde ich hilft mir, mich selbst zu schlagen. Und somit stetig meine Verbesserungen zu sehen
Robert Fitch
26 de septiembre de 2021 |
Versión 3.3.4
Just used it in a race and worked amazing ! Set up and synch was simple on my 530
Lok Chai
14 de septiembre de 2021 |
Versión 3.3.4
Work in conjunction with TTR/TTE datafield. It's like a pacing cheat.
Paul R
7 de junio de 2020 |
Versión 3.3.3
How do you get "Focus" and "Difficulty" as shown on the screenshots? Only prefills MPA and Power
David Baillie
12 de febrero de 2020 |
Versión 3.3.2
Won't budge off 130 MPAand use my actual MPA. Tried all the tricks, used for hours, reinstalled etc, etc! Pretty frustrating. I'm using a garmin 1030 with current firmware.
Yiannis
3 de febrero de 2020 |
Versión 3.3.2
Excellent! Data field works flawlessly on Forerunner 735XT. I like the colour coded power that I am used from the mobile app and it is very convenient that power and MPA are displayed in one field.
Юрий
26 de noviembre de 2019 |
Versión 3.3.2
Lok Chai
26 de agosto de 2019 |
Versión 3.3.2
This is a must have datafield. It's sort of a "fuel gauge". Great pacing tool.
A Horvai
27 de marzo de 2019 |
Versión 3.11-upd2
Works great, pretty much as advertised. For those who see their MPA stuck at 1200W, here are the steps that I had to take to get it to work sync after installing the data field and entering my Xert ID and password on an Edge 520. 1) Phone on, Garmin connect running, 2) Edge520 on, BT on and phone connected 3) Enable the data field in one of your activity profiles 4) Switch to a different profile and start an activity 5) Switch BACK to the profile with the MPA field, start an activity. You should see a yellow dot to the left of the MPA (Still at 1200 for now) 6) Make sure the activity is actually running not paused 7) Wait anywhere from 30" to a few minutes for the Garmin to connect to your phone for the settings 8) Dot should turn green and voila your MPA will now read what is seen in your Xert webpage As far as how useful this is for racing. I think for wheel-to-wheel racing, it's kinda limited. At the effort levels when you're trying to jump on a break, bridge a gap or whatever, it's not like you have much of a choice how hard to go or for how long. You either need to establish a gap or close it. If that exhausts your MPA, well that's that. I was hoping that it would show my MPA has refilled even though RPE didn't feel like I was recovered. But in any REAL road racing, you are rarely recovered once the attacks start until the race is over or you're dropped and sit up.
Nicolai kalviknes
18 de enero de 2019 |
Versión 3.11-upd2
Cant even add it to a datapage. Tried dif page layout, but nothing works
Respuesta del desarrollador
18 de enero de 2019,
Xert-BaronBiosystems
Hey Nicolai. It's no different than any other Garmin datafield that you'd add to your activity profile. You can contact [email protected] if you are still having trouble.
peter jupp
21 de octubre de 2018 |
Versión 3.11-upd2
I find this (and the other related data widgets from Xert) really helpful as they quantify the efforts you are making and guide you, not only for making improvements, but in recovery rides too. If, like me, you find the setup problematic when upgrading to the latest versions try this really helpful guidance page at Xert: http://baronbiosys.com/faq-items/how-can-i-get-my-garmin-apps-to-update-with-the-correct-fitness-signature/ Remember to turn on your device and start recording for a few minutes to get the fitness signature updates - can take a few minutes! You need a device supporting ConnectIQ 2 to get auto signature updates each ride.
Nenad Jevtovic
22 de abril de 2018 |
Versión 3.07
It was better old version without user name and passwort and with manual fitness signature updates. I stop to use it.
Jasper Meijsen
10 de abril de 2018 |
Versión 3.06
It works great! The auto-update saves a lot of hassle which is great. It really takes the garmin to a new level for training. I'm still learning how to get the most out of the Xert Platform, but so far it replaces my trainerroad subscribtion during the summer time.
Darren Edwards
5 de abril de 2018 |
Versión 3.06
Great app just got a lot better with the signature auto update. Brilliant, thanks for this new feature!
Bart Bloomquist
19 de marzo de 2018 |
Versión 3.06
Latest app will not work with the Edge 1030 it appears it doesn't communicate with GCM to auto update the signature now I am just stuck with the default 1200 MPA.
Respuesta del desarrollador
19 de marzo de 2018,
Xert-BaronBiosystems
You may just need to start a recording to get the app to fetch the new values. It might take 5 minutes or so. If you happened to have done a hard reset on the 1030, it unfortunately may then take a few hours. Issue we let Garmin know about.
Thomas Thissen
15 de enero de 2018 |
Versión 2.3.0-upd
Wrong values concerning MPA ... on yesterday's ride I should have had at least three Breakthrough efforts (although MPA value decreased too fast in my opinion), my garmin 1000 showed even a breaktrough badge ... in the end on xertonline I had not even one. may be a good approach, feels embryonic.
Moshe Cohen
8 de octubre de 2017 |
Versión 2.3.0
I love this app and everything that stands behind it! I have two comments though: 1. The MPA field seems to have a wrong value. My MPA in xertonline is around 800, but the app on my Garmin has it as 1200... making it ineffective. 2. While I fully understand the math behind TrainingPeaks, Xert has a bit of a learning curve, at least for me. I tried to load "all" the xert apps into my Garmin 520, but then found that it is limited to 4 ConnectIQ fields, forcing me to choose some xert metrics over others. It would be great if Xert could provide a single app (datafield) that has all the relevant metrics, and have Garmin refer to it as a single ConnectIQ. Nevertheless, very interesting approach to training!
Respuesta del desarrollador
9 de octubre de 2017,
Xert-BaronBiosystems
Formatting a multi-datafield app for all the various screen sizes and activity profiles is the main challenge. We are considering a number of updates including what you're suggesting as well as a new apps with additional metrics, improved algorithms and reducing reliance on Garmin Express/Garmin Connect Mobile for configuration. Thank you for your comments.
Michael Levenson (TriDot Coach)
19 de julio de 2017 |
Versión 2.7-upd
Rober
20 de julio de 2016 |
Versión 0.4.3-e8
Genial para entrenamientos por potencia, información valiosa en combinación con la web
Data Field