A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>
0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66
Esta aplicación requiere acceso a:
Carajean Murphy
1 de enero de 2021 | Versión 0.24.1
Doesn’t seem to be working in venu sq, downloaded pretty quick which is good, but all it seems to say is connecting.
danilo mariani
9 de diciembre de 2020 | Versión 0.24.1
Stefan 2506
3 de septiembre de 2020 | Versión 0.23
This should be a standard feature, the fact that the internal sensor was just gone once connected a Tempe really bugged me! Great work! I am just not sure how this will effect battery life but will see...
Oswaldo Chaves Hoyos
17 de agosto de 2020 | Versión 0.23
Buena tarde, tengo un Fenix 6x Pro y me sale Tempe None Paired. No veo cómo pueda configurar esto y saber mi temperatura corporal. Tampoco cómo escoger Fahrenheit o Centígrados, gracias y estaré pendiente.
Respuesta del desarrollador
18 de agosto de 2020, jim_m_58
The Tempe is an external sensor, and if you don't have one or it's not paired, this is what you'll see. The internal temperature is the temperature sensor inside the watch. It's internal to the watch, and not body temperature as it's impacted by the ambient air. On the watch, to to settings-system-units and set temperature units to either C or F
john_tseng_garmin
7 de julio de 2020 | Versión 0.23
Approach S62 shows "None Paired" ? S62 is on the support list.
Regin Swenning
24 de junio de 2020 | Versión 0.23
fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)
Michael Irmer
11 de junio de 2020 | Versión 0.22
Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.
Richard Vowles
27 de mayo de 2020 | Versión 0.22
I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.
Giantmtbiker01
15 de mayo de 2020 | Versión 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
Geneviève
11 de mayo de 2020 | Versión 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
Zaca
2 de mayo de 2020 | Versión 0.22
It doesnt work in Forerunner 235, i dont know why, please help me!!
Jose Manuel
9 de abril de 2020 | Versión 0.22
Andre Robin
31 de marzo de 2020 | Versión 0.22
Karl Mortar
17 de enero de 2020 | Versión 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
Miguel
21 de diciembre de 2019 | Versión 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
Respuesta del desarrollador
22 de diciembre de 2019, jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor. As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
Joe Kelly
17 de julio de 2019 | Versión 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) : Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause. Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
Yarik
9 de mayo de 2019 | Versión 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.
Dušan Jurkovič
12 de diciembre de 2018 | Versión 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
Christopher Lawley
4 de diciembre de 2018 | Versión 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
Emanuel Chiculita
28 de noviembre de 2018 | Versión 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
Lo sentimos, aún no hay estadísticas disponibles.