Petros Stamoulis
8 de noviembre de 2018 | Versión 7.3.2
I believe this watch face is one of the best!
Tyron.W
20 de octubre de 2018 | Versión 7.3.2
I found out!!!
Mohamed Abdel Samea Khalefa
3 de octubre de 2018 | Versión 7.3.2
Only thing I would like to add is a data field at 12 or 6 o'clock with Garmin logo please specially for those who own Vivoactive 3 that has no physical brand logo on the watch!
Thanks
Tyron.W
29 de septiembre de 2018 | Versión 7.3.2
Would really like to know how to upload the Vivomove HR!
Respuesta del desarrollador
30 de septiembre de 2018, sedwards
Hi there, can you please email me at [email protected], as I am not clear on what your question is. Where do you want to upload to and what is it that you want to upload?
Francis
23 de septiembre de 2018 | Versión 7.3.2
I like the watch face, but I only can get the black background whereas I should prefer the white one on my Garmin approach S60.
How can I realise my preference?
Respuesta del desarrollador
27 de septiembre de 2018, sedwards
Hi Francis. Please go to the web site www.cleananalog.com for some videos of how to change the settings. You need to change the background setting to white. If you still have problems with this please email me at [email protected]
Arild Bergstrøm
14 de septiembre de 2018 | Versión 7.3.2
I can,t get the hang of it. How do I add or remove datafields?
Respuesta del desarrollador
15 de septiembre de 2018, sedwards
Hi there, please take a look at the videos on www.cleananalog.com to see how to change settings. Send me an email at [email protected] if you need more assistance.
Peter
13 de septiembre de 2018 | Versión 7.3.2
Great watchface, I miss the ability to show battery when it's below a %:)
Ibon Izaguirre
13 de septiembre de 2018 | Versión 7.3.2
Great! Can't change second hand colour in my Forerruner935 though...
araratkimo araratkimo
10 de septiembre de 2018 | Versión 7.3.2
Very good ! Support close second hand option?
Respuesta del desarrollador
11 de septiembre de 2018, sedwards
I’m pleased you like it. Can you email me at [email protected] with more detail of what you mean by close second hand option.
Štěpán
1 de septiembre de 2018 | Versión 7.3.2
Great watch face. Could you add option to have even longer hands? I think it would look cool to have hand to the edge on Vivoactive 3 Music.
Respuesta del desarrollador
1 de septiembre de 2018, sedwards
Hi there, I'm pleased you like it. Unfortunately due to the restrictions Garmin puts on the amount of memory a watch app is allowed to take up I have little room for additional features. If I can find some space with future code optimisation I will look at an option to select the length of the hands. Thanks again for your comments.
CLAIRE82
24 de agosto de 2018 | Versión 7.3.2
Love it! Really wanted a traditional watch gave Really good being able to completely customise everything. However, the second hand is intermittent; well doesn't work / show much of the time. I have a Garmin Fenix 3. Sad I know but I really like a good old fashion second hand also helps with roughly timing things with just the watch face. I've definitely got the second selected to be on and showing in the settings. Any help gratefully received.
Respuesta del desarrollador
27 de agosto de 2018, sedwards
Thank you for the positive feedback. Unfortunately the Fenix 3 doesn't support a continuous second hand for third party watch faces (only those pre-installed by Garmin). The reason is that the CPU time to update the second hand exceeds the allowable time allowed by Garmin on the Fenix 3, as well as the Forerunner 230/235/735XT. The result is that when you wake the watch up by shacking or pressing a button then the second hand will appear, but a few seconds later the watch goes into a low power mode that doesn't support the 1Hz refresh rate need to enable the second hand to stay on. Unfortunately there is no way around this.
GufiFChronos
21 de agosto de 2018 | Versión 7.3.2
Very good work!!
But second hand doesn't appear!?!
Respuesta del desarrollador
21 de agosto de 2018, sedwards
The second hand will not work on some Garmin watches as this feature is not supported by the underlying Garmin software. Which watch do you have? (please reply to [email protected])
Dean Roussel
18 de agosto de 2018 | Versión 7.3.2
Love it. Super flexible and easy to customize. Highly recommend!
Анжелика
10 de agosto de 2018 | Versión 7.3.1
Скачала но черный циферблат как получить белый?
Pol Hallen
3 de agosto de 2018 | Versión 7.3.1
Nice, thanks for your work. Please add temperature sensor for forerunner935
Pol
Respuesta del desarrollador
3 de agosto de 2018, sedwards
If you have a Forerunner 935, please install CleanAnalogPlus as this is designed for the 935 type watches and supports temperature.
Mayra Maia Fiorini
21 de julio de 2018 | Versión 7.3.1
Nice, clean watch face with all the information you need in a very discrete way. Can see the time clearly even when backlight is off. My favourite!
Mathias Ness
1 de julio de 2018 | Versión 7.3.1
Can’t customize.. How?
Respuesta del desarrollador
2 de julio de 2018, sedwards
Customisation is via Garmin Connect or Garmin Express. Please visit www.cleananlog.com where you will find links to videos showing how to do this.
Alanfoc
26 de junio de 2018 | Versión 7.3.1
Lovely clean face, incredibly customisable.
AlexeyK.
20 de junio de 2018 | Versión 7.3-upd1
Великолепно! Красивый, четкий и информативный циферблат. Спасибо создателю за работу!
Respuesta del desarrollador
20 de junio de 2018, sedwards
спасибо
Matt
17 de junio de 2018 | Versión 7.3-upd1
vivoactive 3. really like the customization. great watch face!
Jayakumar R 🇮🇳
6 de junio de 2018 | Versión 7.3
One of the best, clean watch face I have seen. Lots of configuration capability too. Thanks guys!
Simone Blanc
5 de junio de 2018 | Versión 7.3
Finally. The watch face I was looking for: light, ultra clear, fully customizable. I liked it so much that it is the only one I reviewed. It is perfect.
mschl
3 de junio de 2018 | Versión 7.3
Indeed very clean. Looks good on my vivoactive 3. Lots of clever gimmicks like colour changing digits / hands to show statuses (like incoming messages, battery life) which help to show all information and keep the watch face clean at the same time.
Paul Roebuck
3 de junio de 2018 | Versión 7.3
Excellent watch face and works well on my vivoactive3. The name of the app describes it exactly, it is a clean, neat analogue watch face. Thank you.
T-garmin
1 de junio de 2018 | Versión 7.3
Excellent.
Watch Face 
