September 1, 2019 | Version 0.18.1
works on vivoactive 3,Thank you!
August 9, 2019 | Version 0.18.1
Great! This is exactly what I was looking for! Works perfectly for me with vivoactive 3 and I really like the simple and pretty design.
August 5, 2019 | Version 0.18.1
Awesome! works ok on vivoactive 3! Thank you!
August 3, 2019 | Version 0.18.1
Nice widget. However, it is not possible to calibrate the pressure. Could you please add this feature?
August 3, 2019, jim_m_58
That calibration is done in the firmware itself. I just report what the FW says.
July 26, 2019 | Version 0.18.1
Why am i negative altitude??
July 26, 2019, jim_m_58
I simply display what the firmware reports. When was the last time you calibrated the altitude?
June 25, 2019 | Version 0.18.1
The app is very good, but how can I change the unit of measuring altitude into meters
June 26, 2019, jim_m_58
That's based elevation units set on your watch.
Settings,System,Units,Elevation on many devices
May 27, 2019 | Version 0.18.1
vivoactive3: it shows wrong direction, (opposite direction...).
May 27, 2019, jim_m_58
The native heading field will also show what the widget shows if you've switched sides for the button and not calibrated the compass.
The watch is "upside down" unless you calibrate the Compass.
May 10, 2019 | Version 0.18.1
This is exactly what I was looking for. In the description it says to calibrate the compass where do I find this option. My compass is backwards.
May 10, 2019, jim_m_58
You have a va3/m and the instructions are the owners manual. Go to Settings,Sensors&accessories, Compass, Calibrate. Not doing so also impacts things like the heading data field, and isn't specific to this app.
May 8, 2019 | Version 0.18.1
February 23, 2019 | Version 0.17
forerunner 645 I also have north turned. What with this? several times calibrated.
February 23, 2019, jim_m_58
I don't see this on a 645M. What FW version are you using? What does the native heading data field show? Please use Contact developer on the right for assistance
February 17, 2019 | Version 0.17
Der eingebauter Kompass passt überhaupt nicht!!! Der zeigt genau in die entgegengesetzte Richtung wie ein Handelsüblicher Kompass. Wer weiß wie zuverlässig der Barometer funktioniert!!!
Unbrauchbar und daher deinstalliert!
February 17, 2019, jim_m_58
If you have a va3, and switched the sides for the button, you must re-calibrate the compass. You'll see the same with the native heading field if you don't re-calibrate the compass.
February 6, 2019 | Version 0.17
Would be more useful to have some sort of time-scale for the alt and baro. Otherwise the graph is fairly useless.
February 6, 2019, jim_m_58
Both graphs are about 160 minutes
December 19, 2018 | Version 0.17
Baro shows OK but looks that I am under the ground 93 meters.
December 19, 2018, jim_m_58
I display what the firmware reports. Start a GPS activity and it should calibrate base on which watch you have.
September 8, 2018 | Version 0.16
Perfect. Simple yet exactly what i wanted.
August 27, 2018 | Version 0.16
Thank you very much. This ABC widget is an excellent choice to my 645.
July 23, 2018 | Version 0.16
I love this widget, it's simple and super useful. It works fine (N points north) on my vivomove3 and I keep my button on the left. The only thing that doesn't work: the widget will not advance to the next if I try to use the sensor bar on the side of my watch, it advances to the next widget if I swipe the screen.
June 21, 2018 | Version 0.16
Works great for me on vivoactive 3. I would give it 5 stars if the compass would flip directions when you flip the button on the watch to the left on the settings. For now I just have to remember that south is north and east is west.
June 21, 2018, jim_m_58
I have no control of that. It's a FW problem when the buttons are flipped and you also see it in the FW's "Heading" data field.. I reported it soon after people got the device last fall and let e know. When the firmware gets the fix, the widget should work fine. Until then, keep the button on the right side....
June 13, 2018 | Version 0.15
Vivoactive HR - FW 4.40 doesn't solve the baro - graph problem
June 13, 2018, jim_m_58
Yes. 4.40 has been out for a couple months and doesn't fix it. I reported to garman even before that, and all that can be done is to just wait for a fix. I can't display data I don't have.
May 7, 2018 | Version 0.15
the compass is great but the Alt is totally out of wack.
May 8, 2018, jim_m_58
I just report what the firmware sats for the altitude. Have you calibrated it on your watch? Used GPS within a few hours, etc?
April 26, 2018 | Version 0.15
Useful barometer and altitude additions to the compass. Works well on FR645.
April 18, 2018 | Version 0.15
do you know when the new FW that will allowed the pressure graph to be displaied will be released?
March 17, 2018 | Version 0.15
Non viene visualizzato il grafico della pressione barometrica
March 17, 2018, jim_m_58
If you are using the vahr, there is a bug in the firmware where that information isn't available. Hopefully, the next version of FW will fix that bug.
February 19, 2018 | Version 0.15
Good, reliable app!
However, I'm having same problem as mentioned by users befor me. On vivoactive 3, wearing on my left hand and the button on the inside, is showing wrong position of the cardinal points (the other way around).
Please fix this problem!
February 19, 2018, jim_m_58
It's a FW bug, and the native heading field is the same with the button on the left.
January 22, 2018 | Version 0.14
Great app but pressure not good.
January 22, 2018, jim_m_58
Please use "Contact Developer" to let me know which watch, firmware, etc
January 5, 2018 | Version 0.12
Good idea to have all in one screen, but I can suggest two improvements: ability to calibrate barometer (altitude and sea level pressure) by start button and the other one is about displaying pressure not just in Mars, but according to system settings or at list widget additional preference, I prefer mmHG.