May 12, 2022 | Version 0.3.24
The app works but it too simple, as other written before, an allert system should be implemented. maybe with a colored code like in the android app.
really too simple, hope in future updates.
February 24, 2022 | Version 0.3.23
update - das firmware update ist nicht sehr intuitiv, aber mit etwas probieren dann doch gelungen
danach beide untis in garmin datenfeld angezeigt
hoffentlich bleibt das auch während einer mtb-tour auch so
January 12, 2022 | Version 0.3.23
In order to desplay readings on Garmin devices, you need to put the Airspy 5 digits serial numbers in The Settings Bike 1 front, Bike 1 rear,...., Bike 3 rear.
The Settings are not for your dream tyres psi reading XD
Fernando Martínez Díaz
December 29, 2021 | Version 0.3.23
He adquirido recientemente los sensores airspy y, aunque se conectan con la app del teléfono móvil (y se desconectan continuamente), en el garmin 830 no muestra más que la presión 0.00 en ambas ruedas siempre.
En la app del móvil están continuamente desconectándose, lo que es irritante, pues continuamente te sale el aviso de presión baja y tardan unos segundos en conectarse otra vez.
En el campo de datos de connect iq he metido los números de los sensores en bici 1 y solo muestra como presión 0.00.
Sinceramente, estoy muy decepcionado con el producto.
October 9, 2021 | Version 0.3.23
Funcionan bien, algún problema al conectarlos al Garmin 1030 Plus, ya subsanado. Lo que no consigo es actualizar el firmware a la versión V1.0.1 ya disponible.
¿Alguién lo ha conseguido? ¿En caso afirmativo, cómo lo ha hecho?
August 30, 2021 | Version 0.3.21
Damn! Was working fine. Now it flash between « b1 », « ist » and « - » , loose the pressure every 5-10s, and only one of the two sensor display a pressure! What is going on.. I tried to re-install the app, no succes. Basically unusable now. Damn this look like product with no support.
September 9, 2021, SKS-GERMANY
we are sorry you made this experience.
Please contact [email protected] and tell us wich device you are using in order to solve this problem.
Best regards, your SKS GERMANY Team
August 24, 2021 | Version 0.3.21
Please add a pressure Alert feature, e.g. using "https://developer.garmin.com/connect-iq/api-docs/Toybox/WatchUi/DataField.html#showAlert-instance_function" or standard Audio prompts. Warning values could be set using Garmin Connect.
August 17, 2021 | Version 0.3.21
In regards of low pressure Alarm 》》》
It seems I am not the only one who is expecting this as a basic function of a pressure Monitor system.
I just installed my system and needed to find out that this function is NOT available via my Garmin (only via the app on phone)
It was mentioned in other comments here as well, that this function is wanted, but I could not see any feedback from SKS here.
Please inlighten us when and / or if this function will come.
July 29, 2021 | Version 0.3.21
I deleted my bad rating, everything worked as it should on all Garmin devices! My mistake was that I entered only one sensor number in the SKS AIRSPY data Field!
IT IS NECESSARY TO ENTER THE NUMBERS OF BOTH SENSORS!
Everything works on devices:
Fenix 6x pro solar,
I will conduct tests on two bicycles, a mountain bike and a fat bike.
I will write my impressions later!
July 18, 2021 | Version 0.3.21
June 12, 2021 | Version 0.3.15
Das Problem mit der Version 0.3.15 ist immer noch, dass nach einer gewissen Zeit immer nur ein Wert eines Sensors angezeigt wird, und sich dann auch abwechselt. Muss dann immer den Edge während der Aktivität neu starten
June 1, 2021 | Version 0.3.0
Great that you can now have up to 4 units.
Since the last update, the font size has become too big to show on a single field (on the 530 and it's screen) and the digits are too far left and too far right to the screen edge. Please correct it.
As mentioned previously, the pressure data does not always display on the field. Sometimes the front, sometimes the rear and sometimes both. This needs to be sorted out.
Since owning for over a year now, the issue of not refreshing still exists. So if you like me, move the wheels and then switch on the Garmin ( or Garmin is already on) and then do nothing for 10 mins, the next time you get on your bike, the pressures on the field don't change. You have to pretty much switch off the Garmin off and on/ start new ride. To avoid this scenario, You have to have started your ride before the sensors stop transmitting (10 mins I think), or switch the Garmin off and back on again when you are ready to ride.
All of this has been fed back to the developers, hopefully the interface with Garmin will improve.
Regarding the low pressure warning... There is a workaround. You can have the phone app running in the background and if the pressure drops the message is sent from the phone to the Garmin as a message. There may be a delay, but if you have a very slow puncture, this may be helpful but again it's not an ideal solution.
I've suggested have a digit colour change when the pressures change, so it's more visible on screen
May 31, 2021 | Version 0.3.0
The device looked nice and working on phone. Very disappointed because not working on my garmin Edge 1030 as well on my second garmin 1000 not working. I dont know where is problem but look like app not working correctly on garmin. There is problem with this application not with garmin. Garmin connect and garmin express see this application. You see the pressure as element in garmin but shows only 0.0 (on my booth garmin) A lot of my friends want to buy this but when listen about problem with garmin there is not way. I sent email to SKS but the answer was nearly like here. Its curious how many people (customer) have problem with garmin showing live pressure but look like SKS don't doing nothing with this problem.
May 31, 2021, SKS-GERMANY
thanks for your feedback.
We are sorry you made this experience.
We are always caring about our customers and try to solve their problems.
Please contact [email protected] in order to find a solution.
Best regards, your SKS GERMANY Team
May 29, 2021 | Version 0.3.0
It's ok, basic working really miss loss alarms
May 28, 2021 | Version 0.3.0
Grossartig!!! Endlich Sicherheit über den aktuellen Luftdruck. Ich möchte nie mehr drauf verzichten. Danke
May 18, 2021 | Version 0.3.0
Lief seit 3/4 Jahr ohne Probleme. Seit dem Update zeigt der bei einem Sensor immer nur 0,00 an und das wechselt immer zwischen vorne und hinten. Dass heißt, es wird immer nur von einem Sensor der Wert angezeigt. Verwendet wird ein Edge 830.
May 18, 2021, SKS-GERMANY
danke für dein Feedback.
Es tut uns Leid, dass du diese Erfahrung gemacht hast. Ein solches Probleme sollte nicht auftreten.
Bitte melde dich unter [email protected], damit wir das Problem lösen können.
Schöne Grüße, dein SKS GERMANY Team
May 17, 2021 | Version 0.3.0
Works well, but lacks the alarm functuon for air loss, also the pressure data is not recorded during the activity, only shown real-time
May 10, 2021 | Version 0.2.3
Salve,ho acquistato una coppia di sensori x mtb e funziona perfettamente col garmin .
HO acquistato in seguito una seconda coppia x mtb trail,ma come faccio ad inserire e memorizzare altro codice di identificazione ,in modo da far riconoscere al garmin le 2 coppie di sensori ?
Con app funzionano ok
April 18, 2021 | Version 0.2.3
Device complicated to install (deflates tyre - leaks - Lockring tight "enough")
Long app download on phone.
Handwrite serial #. Why ?
Firmware update not starting even with unit disconnected.
Garmin shows ERR3. What is that ?
Pressure on Garmin frozen or real ?
Why airspy not on GARMIN ANT+ sensor screen ? Like a powermeter or HR sensor ?
Product NOT READY.
April 26, 2021, SKS-GERMANY
thanks for your feedback, we are sorry you made this experience.
Please contact [email protected] in order to solve your problems.
Best regards, your SKS GERMANY Team
April 15, 2021 | Version 0.2.3
I have 2 air spy for 2 bikes. How can i connect for 2 bikes with 1 garmin?
April 15, 2021, SKS-GERMANY
thanks for your feedback. We are already working on an update that will make it possible to connect several pairs of sensors to one Garmin.
Best regards, your SKS GERMAY Team.
March 27, 2021 | Version 0.2.3
Excellent devices. I bought a pair for my road bike. The only problem is with Garmin fenix or Garmin edge the app is not having an option for alert on specific psi which make the device useless for most of the time.
Jean Francois DONNAY
March 18, 2021 | Version 0.2.3
Characters really too small on edge 1030, no charts
March 28, 2021, SKS-GERMANY
Dear Jean Francois,
thank you very much for your feedback.
We will look at this issue and check the possibilities for optimisation.
If you have any further questions or suggestions, please feel free to contact us at [email protected]
Your SKS GERMANY team
February 8, 2021 | Version 0.2.3
I just received my SKS Airspy SV in the mail today. I love the quality packaging and easy install. Instructions were very simple to follow. Don't be alarms when the air evacuates from the value after screwing on their adaptor. It will stop once you slide the unit in place. I double checked the reads from the app with my digital gauge and they are accurate. Getting the units connected to the MySKS App was easy, although I wouldn't say the same for my Garmin Edge 530. Instructions on how would have been nice to see in the box. Hopefully they add the ability for multiple sensors on Garmin soon.
December 1, 2020 | Version 0.2.3
As others have pointed out, more sets for more bikes would be useful, as well as a way of logging the tire pressures to the activity files for reference (as with TyreWiz, for example). Otherwise, needed to look good at the manual before getting data into the Edge and Forerunner, though. That was my bad.
November 24, 2020 | Version 0.2.3
Really need to have the ability to add more sensors for second bike... What is the likely date this functionality will be added?