Marin
November 13, 2018 | Version 4.3.1
My apologies on this comment, this watch face does not work well on my quatix 5!
Developer Reply
November 13, 2018, Beeso27
Thanks for letting me know. That is a very strange! I use a Fenix 5 without any issues, which according to Garmin simulator should be exactly the same. If you still have the patience to make it work send me an email via the 'Contact Developer' link and I can help sort it out for you. Thanks
Alen
August 15, 2018 | Version 4.3.1
New version slowdown my watch fenix 5x and battery consuption is double then before.
I was very happy with this watch face, please revert what can be done to continue using it.
Thanks,
Developer Reply
August 15, 2018, Beeso27
Sorry it is a bug in the Garmin firmware that is causing the problem. The problem is well documented in the Garmin Forums and whilst they have released some beta patches to the firmware it continues to be a major issue. The watch face software software has changed very little and performs as normal on other devices. Thanks
Brennan Browne
August 9, 2018 | Version 4.3.1
Love the watch face and all of the customization. I can't seem to get the temperature gauge to show the correct outside temperature however — has anyone figured out how to get this to work? My only other complaint is that my device (Forerunner 935) seems to operate quite a bit slower with this watch face selected (e.g. when entering the start exercise screen from the watch face, or returning to the watch face itself from anywhere).
Developer Reply
August 22, 2018, Beeso27
The temperature shown is the temperature returned from the sensor on the watch. It is not the outside temperature fetched from website. A new weather dial is in test. Thanks
Eliot BARDET
August 6, 2018 | Version 4.3.1
One of the best watch face around, great work ! Only thing: I can't find the option to disable the second hand or enable it in high-power mode only, although the doc says you can ? It seems that the second hand is displayed all the time so it consumes a little bit more battery.
Developer Reply
August 7, 2018, Beeso27
Yes the second hand can be turned off via the settings page in Garmin Connect. There is also full website with samples and documentation on settings at http://www.alteredpt.com.au/GMT4-Settings.html
Alexander El Farran
July 10, 2018 | Version 4.3.1
Finally an analog face to configure on your own. Great options and functions. Sadly it really slows down the Fenix 3 HR. Using the shortcuts takes really long to work. Other than that, great watchface. Thank you for that.
Werner
March 24, 2018 | Version 2.3.11
When will it be available for the Fenix 3 HR?
Developer Reply
March 24, 2018, Beeso27
Check GMT4 Lite it supports Fenix 3HR and has all the same features. See web site for full explanation. Thanks
g.manca
March 21, 2018 | Version 2.3.11
One of the best, but doesn't work anymore on fenix 3 (not HR) , only default digital watch appears
Developer Reply
March 21, 2018, Beeso27
I will check why. I moved Fenix 3 HR to the Lite version as it had a memory problem. The Fenix 3 support should have stayed with the standard version. The lite version has some code removed that does not run on Fenix 3 and saves memory. It has all the same features so switch across to that version if it is available. Thanks
ManInRed
February 17, 2018 | Version 2.3.9-upd
This was my favorite watch face and I have been using it for almost a year. Unfortunately, since about a month or so ago it no longer works on my fenix 3HR. Whenever I try to install or enable it from the watch menu, only the digital watch face appears. I have tried uninstalling/reinstalling reinstalling the GarminOs, changing the settings, etc. but nothing seems to work. Any tips how to fix this? Many thanks!
Developer Reply
February 18, 2018, Beeso27
I cannot see anything in the code to impact the performance on Fenix 3 HR. I have tested again in the Garmin simulator and it is working fine. Can you contact me via the 'Contact Developer' link on the Connect IQ Store page and I can help you work it out. Thanks
HassieH
February 17, 2018 | Version 2.3.9-upd
Hi. GMT4 "was" my best favorite watch face.
Unfortunately, probably since last update of FR735XT, it doesn't work (T T) . The watch face is not appeared but Garmin default digital is.
I know the GMT 4 "Lite" version, but I can't download it. Because my device -735XT"J"- is treated as a not supported device on the download page.
Please ask you to add "J"model to the support device list.
Developer Reply
February 17, 2018, Beeso27
Sure, I will give it a test and add it to GMT4 Lite as I think the FR735J still has little less memory availble (60kb). Thanks
Chris
February 9, 2018 | Version 2.3.9-upd
What a great watch face! Loads of customization and still achieves a nice, classic look. Well done! Looking forward to future tweeks and updates.
ANDREW MACKAY
January 26, 2018 | Version 2.3.9
Laggy. Slows my watch down. Wish to uninstall but does not allow it? How can I do this?
Developer Reply
January 26, 2018, Beeso27
Yes once you install a 3rd party watch face additional Garmin software needs to run unlike the standard faces which are part of the firmware. To uninstall you need to switch to a different watch face and then the uninstall will work. Is a known problem with Connect software. See GMT4 website for full details. Thanks
robbie_roy
January 21, 2018 | Version 2.3.9
Fantastic app for getting a classic watch face. I am looking forward to the Master version for 645 when you get to it for the seconds hand, but this is great in the meantime. My few thoughts for some more flexibility: [1] allow user to change the thickness of the hour markers (I could see a few of us wanting the option for bolder). [2] Have an alternate day-date subdial that doesn't show all of the days constantly (I would like to use the day-date subdial but it looks a little heavy with the M-T-W-etc. compared to all of the other subdials). [3] Add a notification subdial -- it might be a little basic, but even just a number / hand in a circle that pointed to your number of notifications would be awesome. [4] A subdial that allowed for a stopwatch would be amazing but I can see how that would be beyond what CIQ allows. It would be very nice if you could hit "back" from the watchface to start a stopwatch, hit back again to pause, hold back to reset. We can wish. Anyway, these are a lot of comments for an already great face that is now my go-to watch face. Keep up the great work!
Developer Reply
January 21, 2018, Beeso27
Thanks for the review, some great ideas in there for some new features! Thanks. The updated GMT 4 Master with FR645/M support should be out in the next day or two. Just doing a little more testing before I release it.
Mario
January 21, 2018 | Version 2.3.9
Good Watch Face due to possible modification! It would receive 5 stars if it does not slow down my Garmin Fenix 5 (OS version 7.6) a lot!
Developer Reply
January 21, 2018, Beeso27
You may want to look at trying GMT 4 Master as that version is better suited to Fenix 5 devices. That version has some performance improvements by using extra memory available in these devices. Thanks
tomasini
January 11, 2018 | Version 2.3.7
Beautiful work on this look of watches! Many setting options for everyone. Will it sometimes be possible to view the day of the week at (at 4/5 o'clock)? Future choice: Day and Date Box (at 4/5 o'clock)
Thanks for every other update!
OnJed
January 1, 2018 | Version 2.3.6
Good job. Please possibility to see the second hand still.
Developer Reply
January 1, 2018, Beeso27
Thanks for the feedback. Yes you can have the second hand always on with the GMT4 Master watch face. Check the website for full details on what is supported on various devices.
Mathieu Harvey
December 21, 2017 | Version 2.3.6
Best watchface available. Very deep customization. Unfortunately, when this face is applied on a Vivoactive 3 the watch becomes very laggy and slow, frustrating to use.
Developer Reply
December 21, 2017, Beeso27
Thanks for the review. Try a few other watch faces and see if the watch is still slow. The app does no calculations as it exits yet some other widgets still take 1-2 seconds to load on some devices. If you use the Garmin watch faces this does not happen since I think they work directly with the firmware whereas watch face developers have to use the Garmin API which takes some time to load and unload on the watch.
If you are using Vivoactive 3 then take a look at GMT4 Master as it supports an 'always on' second hand.
Raymond Beaufait
December 1, 2017 | Version 2.3.4
This is a great watch face, but it drains battery at over 1%-2% per hour. Is there a setting that is causing this. Other watch faces have caused this too, but this drain is way too much. Currently my watch drains 7-8% per day, giving me almost two weeks. This high of a drain rate on the vivoactive is too much.
Developer Reply
December 1, 2017, Beeso27
Sorry, you will just have to use the standard Garmin digital watch face if you want to extend the battery life as long as possible. Watch face developers have to use the Garmin development kit to build their applications and when this is running on your device it uses a little more power. That is why you will find all watch faces cause a little more power use. Thanks
Giancarlo Capanni
November 27, 2017 | Version 2.3.4
$ stelle, ma se ne meriterebbe 5, app davvero personalizzabile e davvero modificabile in tutte le sue parti, l'unico problema è che per modificarla devi collegare l'orologio al pc e staccarlo tutte le volte che vuoi vedere che modifiche hai fatto, doveva esserci in garmin express un interfaccia che faceva vedere le modifiche applicate, per poi scaricarle. In buona sostanza molto macchinosa ( vivoactive 3 )
Developer Reply
November 28, 2017, Beeso27
Yes you can change settings via your phone
http://www.alteredpt.com.au/GMT4-FAQ.html#changeSettings
Also for the Vivoactive 3 you should look at GMT4 Master
Garmin do not offer a way to see changes as they happen however the documentation has lots of examples as to what the settings do.
Thanks
Lloyd Dunse
November 27, 2017 | Version 2.3.4
new to the whole fenix world. How do i actually go about changing the configuration/customisations? do i need to do it through Garmin Express? thanks
Developer Reply
November 28, 2017, Beeso27
Yes check out the website for full documentation on changing settings, what various settings do and some samples.
http://www.alteredpt.com.au/GMT4-FAQ.html#changeSettings
Also if you are running a Fenix 5 then you may want to switch to GMT4 Master
Thanks
daver
November 25, 2017 | Version 2.3.4
Great watch face. Lots of customization. Would it be possible to make the seconds hand always visible?
Developer Reply
November 25, 2017, Beeso27
Yes, Check the website for full explanation on second hand. Use GMT 4 Master if you want an always on second hand and your device supports it. Thanks
David AV
November 23, 2017 | Version 2.3.4
Gr8. Amazing configurable WF
Robertcalin
November 23, 2017 | Version 2.3.4
great for fenix 3 hr
Nikolai
November 21, 2017 | Version 2.3.3-upd
Настройки часов сами сбрасываются к начальным установкам несколько раз в день. Секундная стрелка не показывается. Очень сырая программа!(
Developer Reply
November 21, 2017, Beeso27
Please check the website for full documentation and how to fix your issues. There is a reason the settings keep being reset, it is a Firmware issue. Only some devices support refresh every second so you need GMT 4 Master if you have one of those devices. Once again explained in great detail on the web site. Once you have read the help and support files perhaps you can come back in and do another review!
Gerald Begnaud
November 21, 2017 | Version 2.3.3-upd
One of the best watch faces I've seen & I've seen quite a few! Very sharp and clean works great.There is quite a few choices that are available to make the watch your own Style! Please keep up the great work.
Developer Reply
November 21, 2017, Beeso27
Thanks for the review. Check out the web site for some samples or if you have a cool set of watch face settings send me a photo and I can add it to the samples page. Thanks.
Georgi Valentinov Grigorov
November 18, 2017 | Version 2.3.3
Best looking analog face on the market. Almost every other does not look like on the pictures , BUT this one is really smooth and highly customizable. Unfortunately I cant give you the fifth star due to its lag. Ive tested it for 12 hours on my Fenix 5 and I am absolutely sure that when I rock that face, all actions taken on my watch , all buttons pressed have delay of 1 second and it feels clunky. As soon as I swap that face with whatever else I have, and everything gets on point. The delay is everywhere, when locking/unlocking buttons , when swipe widgets when entering the settings menu, everywhere .. and it only happens with that face applied. I hope some day the reason get a fix so I can use that and only that face 24/7. Great job overall.
Developer Reply
November 18, 2017, Beeso27
Thanks for the feedback. You should try GMT4 Master on Fenix 5 as that supports an always on second hand.
When the watch face unloads it does not to any processing so it is impossible to make that run faster. At load time Garmin has to load the VM that 3rd party watch faces use and then do a lot of calculations to support all the various options. This still takes less than a second on my Fenix 5. It should have zero impact on scrolling between widgets etc. I will do some more testing on my old FR235 to see if it can be made to run faster. Thanks
Watch Face 
