October 21, 2020 | Version 4.8.10
Sigue vaciando la batería en 2 días en mi Vívoactive 4. Tengo instaladas otras esferas y solo me ocurre con esta.
October 22, 2020, Beeso27
Eduardo, Check you have the latest Garmin firmware. The only time I have seen this happen on some device types it has been due to faults in the Garmin firmware. I will have a look on the forums to see if there are any reported issues for V4 devices. Thanks
October 12, 2020 | Version 4.8.10
Muy completa pero excesivo consumo de batería en Vívoactive 4.
October 13, 2020, Beeso27
Thanks for the review. Check the website as there are a few options for saving power depending on the device. The 'always on' second hand does use additional power on larger devices however it should never go over 8% a day. The only time I have seen that is when there have been firmware faults. Thanks
June 11, 2020 | Version 4.8.8
Buon quadrante, personalizzabile in tutto, dai colori alle informazioni
October 13, 2020, Beeso27
Thanks! The website has a watch simulator built in so you can see what all the options do and use some of the predefined templates.
May 17, 2020 | Version 4.8.8
Customizable to the “nth” degree, which means a lot of options.
You can customize and schedule the face changes online which allows you to also visualize the faces. Support is excellent
May 3, 2020 | Version 4.8.8
Have been using this watch face for a little while now, it is very customisable - paid features are great (auto different themes in schedule etc) and developer responsive - you can fit a lot of info on the screen yet somehow it is very easy to read, love it
March 18, 2020 | Version 4.8.2
What is the refresh rate of weather data?
March 19, 2020, Beeso27
Thanks for the review! The weather will update each hour. It should be within the first 5 minutes if you watch is connected to the internet via your phone. If you use the Power Saving mode then it will also stop checking for updates whilst Do Not Disturb is active.
January 24, 2020 | Version 4.8.2
Is it possible to make the second hand work constantly? Thx! I have a FR 245
January 24, 2020, Beeso27
Yes, select the option on the settings page and make sure you are using no more than 4 different colours. Check the website for full documentation and FAQ help page. Thanks
January 21, 2020 | Version 4.8.2
Je l’utilise depuis deux ans et n’arrive pas à en changer. Par depuis la mise à jour, le problème de police sur les chiffres des complications est toujours existant. Ils sont plus gros et gras.
January 22, 2020, Beeso27
I am not sure I understand the problem. If you contact me via the Contact Developer link I will help you. Thanks
January 3, 2020 | Version 4.8.1
Love the watch face but second hand only stays on for short duration then stops (VA4). I only have 4 colours (black, red, white,dark grey)
January 3, 2020, Beeso27
Thanks for the review! Just check you don't have any other colours set for features not in use like Home hand, logo, etc. Send me some details via the Contact Developer link and I will help you out. I checked it again in the simulator for the VA4 and it should work.
October 24, 2019 | Version 4.7.2
One of my favourite displays, good work! But why does the second hand disappear when more than 4 colors are used?
October 24, 2019, Beeso27
Check the website for details. You will have more than 4 colours defined in your colour palette. Check if the Home hand is set to a time zone then those colours also count. Thanks
August 10, 2019 | Version 4.7.2
Superbe application que j'utilise depuis plus de 18 mois sur F5x. Mais depuis la dernière mise à jour, impossible de sélectionner une autre couleur que le bleu.
Sinon Bravo pour le job
August 11, 2019, Beeso27
Can you contact me via the Contact Developer link and I will check it out for you. I had that issue on FR735XT but has now been fixed. I will check again in the simulator. Thanks
July 29, 2019 | Version 4.5.6b
This version works perfectly on my Vivoactive HR. The other version of this did not as I wasn't able to change colours. Great watch face!
July 29, 2019, Beeso27
Andy, Thanks for the feedback. I am about to release an update to all versions so I will do some more testing on the VAHR before I release it. That device is slightly more restricted on memory. If you contact me via the Contact Developer link I would be happy to investigate further with your help.
July 1, 2019 | Version 4.5.6b
This is just the watch face I was looking for. My only problem is that I can’t seem to figure out how to make the optional 3rd hand appear. It might be operator error. Any tips? Thank you.
July 2, 2019, Beeso27
Matt, Check the web site it has full documentation on the settings as well as a simulator to see what each of them does. The short answer is that the ‘home’ hand appears whenever you are outside the time zone defined. So if you set your home time zone to be US Mountain time with US daylight savings rules then whenever you are in another time zone the extra hand will appear to show the time in Denver. When you are in Denver the extra hour hand is hidden. Ideal if you travel a lot.
June 8, 2019 | Version 4.5.6b
Best watch face on Garmin... period!
May 21, 2019 | Version 4.5.6b
First of all thank you very much for the wonderful watch face, then I wondered if it is possible to show or add a second hand for the sub dial when time zone is showed.
Thank you very much to make me happy for the above request.
Keep up the good work.
May 21, 2019, Beeso27
Frank, it is possible but the hands on the sub dials become quite small and difficult to read. If you switch to display a 30 minute time zone , like India, you will see what I mean as that displays an hour and minute hand in the sub dial as the minutes is not the same as the zone your in. Thanks
April 3, 2019 | Version 4.5.6b
There is a ton of customization and it cool!
This is one of the best watch face for garmin.
March 27, 2019 | Version 4.5.6b
One of my top 2 favorite watch faces. This one is the best quality for the display and has a lot of configuration options. Unfortunately I like the dials that have 2 bits of data in them...e.g. Activity on the dial with HR inside but you can only set Activity as the outside dial info. Otherwise it is a 5*. Well done.
February 2, 2019 | Version 4.5.5
Simply the best analogue watch face out there
January 18, 2019 | Version 4.5.4
Very good looking watch face with a lot of options. Maybe I am missing something but not able to add weather to a dial. Other than that overall it is the best face I have found.
January 18, 2019 | Version 4.5.4
This is by far my favorite watch face. There are some peculiarities, but apparently they are caused by my watch's (VAHR) restrictions and not the app. The developer, even though he is many time zones ahead of me, is very quick to react and I love his detailed explanations. I even had my brother change his (until now) favorite face to this one, his new favorite!
I can't wait to try this on my new watch that's coming soon!
January 14, 2019 | Version 4.5.4
Second hand disappears in every color except white and light gray. Second hand also disappears when icon color is not white.
January 14, 2019, Beeso27
Yes you are using more than 4 colours in your colour scheme. This is due to memory restrictions on the device and is documented in posts below or on the website https://www.alteredpt.com.au/GMT4-Settings.html The web site also has an updated configuration page where you can try out all the settings. Thanks
January 4, 2019 | Version 4.5.4
The 4 GMT4 * watchfaces are not work on vivoactive3, after update, please help to fix, thanks.
January 4, 2019, Beeso27
Thanks for letting me know. Can you send me some details via the contract developer link and I will take a loo. It seems to work ok in the simulator but that assumes you have latest firmware updates. Try a full reboot of the device as well. Thanks
January 3, 2019 | Version 4.5.4
I have tested almost every watch faces of the store and this one is just the best.
The screen is really beautiful and fully customizable.
If you just need to install one application, go no further, you've found it!
Thanks to the developper!
January 3, 2019, Beeso27
Thanks for the review. There is now a Facebook page where you can stay up to date with changes and share your favourite settings
December 31, 2018 | Version 4.5.3
I really like the detail given in the descriptions and in support. I did however find a bug I think (one I have seen in other faces as well). The second either hangs or disappears from time to time. I can only assume this is a memory drain issue. Otherwise, I really like the layout and available customization.
December 31, 2018, Beeso27
Thanks for the review. Take a look on the web site for details on the second hand. Depending on your device and settings the second hand can be set to be always on or only sown in 'gesture mode'.
December 30, 2018 | Version 4.5.3
Great but doesn't work since the version 5.0 of the watch. The face watch is always automatically replaced by the face Modern Digital.☹
December 30, 2018, Beeso27
Thanks for the review and letting me know there maybe a problem. There is no release 5.00 but if you send me some details via the 'Contact Developer' link I will help you sort it out for you.