App Icon



My grandpa was watchmaker and I am programmer and runner ;) ...This is analog watch face with five hands displaying some useful data like Sunrise/Sunset*, current phase of the Moon, altitude, daily steps and their progress towards the goal, 7-days history chart, burned or active calories, walked distance, heart rate**, etc. Highly configurable.</p><p></p><p>(*) For Sunrise/Sunset computation th...

What’s New

The development of this watch face took me a lot of hours. If you like what I'm doing, you can donate me via PayPal: (that will also motivate me for future upgrades :) ...or at least leave a positive review here.</p><p></p><p>How to get Sunrise/Sunset times on Fenix 5x:</p><p>1) select an activity (the one which uses GPS)</p><p>2) wait for GPS signal and start the activity...

Additional Information


This app requires access to:

  • Heart rate, barometer, temperature, and altitude history
  • Your Garmin Connect™ fitness profile
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5
  • fēnix® 5S fēnix® 5S
  • fēnix® 5X fēnix® 5X
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® 3 vívoactive® 3
Average Rating: (425 Ratings)

October 14, 2017 | Version 6.00

My favorite watchface but unfortunatly still no floors climbed setting.

October 13, 2017 | Version 5.91-upd

Sieht super aus und macht was soll.

October 3, 2017 | Version 5.91-upd

I like your design very much, simple but useful , including heart rate , battery, sunset and sunrise , which i watch every day. I use the Garmin app for my running history and details. As a Hongkonger, I would like to express my gratitude further because you choose Traditional Chinese for Sun to Sat. Traditional Chinese can be easily found in anything in museums. It has a long history but not many people know. All the best. Thank you.

September 29, 2017 | Version 5.91-upd

I really like. The only thing I would change is notification icon. It's nice that it shows the number but it's very small and it is very close to the alarm icon. Would be great to have the option to set it up as alternative to altitude and make it a little bit bigger. Anyway, the great one!

September 28, 2017 | Version 5.91-upd

The best watch-face on F5X! Donation on the way. Could You add possibility to set up on left or upper sub-face information about climbed floors or activity minutes?

September 15, 2017 | Version 5.91-upd

very nice but why in my fenix 3 I cannot change the colours? I have only black background and the rest is white. Please help!

Developer Reply
September 16, 2017, mbell-SVK

Because you have to do it through GC or GE. :) It is exactly the same as for the other custom watch faces. You can use Garmin Connect Mobile app to change the watch face settings: Menu-Garmin Devices-(your connected watch)-Connect IQ Apps-Watch Faces-HandsFive-Settings (and there you have a lot of options to play with). Your watch has to be connected to the phone via BT and your phone has to be connected to the internet.

September 12, 2017 | Version 5.91-upd

Very nice watch face! One question: The left subdial has an optional pointer indicating steps progressing up to the daily goal. But what is the significance of the edge color of the left subdial? The right half is solid, red or white, whereas the left half is split into four sectors, red or white. Would appreciate if you could explain this. Thanks!

Developer Reply
September 12, 2017, mbell-SVK

Hi, the left subdial's edge is divided into 5 sections. Each of them represents your inactivity - the right half turns red when you don't move for an hour, then the other four sectors stand for another 15 minutes each (all together 2 hours of inactivity). When you start to move anytime between for at least 2-3 minutes, all red sectors are cleared. This is the representation of garmin's move bar.

September 10, 2017 | Version 5.91-upd

The best of the best !

August 25, 2017 | Version 5.91-upd

Il più completo è meglio personalizzabile. Ottimo lavoro.

August 25, 2017 | Version 5.91-upd

Super, macht was es soll und sieht gut aus. Wenn man das Datenfeld "Höhe" noch tauschen könnte mit Treppenstufen dann wäre es perfekt.

August 17, 2017 | Version 5.91-upd

Está muy completo y diseño muy chulo me a gustado mucho , gracias desarrollador esta muy bien .

August 13, 2017 | Version 5.91-upd

I love this display. very clear, visible and readeable numbers and signs, specially with the dot mode of the smal hands. Great Job - Thanks!

August 9, 2017 | Version 5.91-upd

Excellent cadran

August 2, 2017 | Version 5.91-upd

Very nice watchface! Thanks!

August 1, 2017 | Version 5.91-upd

Best watchface ever and with the difference from the rest. Very customizable and with all data needed. ONLY thing to improve is to have a "second hand" all time visible. Thank you for your work. Donation on the way

July 27, 2017 | Version 5.91-upd

Very good watchface, very clear and customizable.

July 26, 2017 | Version 5.91-upd

Fenix 3 hr çalışmıyor

July 24, 2017 | Version 5.91-upd

Je télécharge mais le fond d'écran que je retrouve sur ma montre ne ressemble en rien à ceux montrés ici......

Developer Reply
September 6, 2017, mbell-SVK

That's because you can customize it to your liking.

July 23, 2017 | Version 5.91

This it's ALMOST the best watch face I have ever seen on my Fênix 3 HR! The only thing I miss are the dynamic hands when I look at my watch. Thank you!

July 21, 2017 | Version 5.91

My new favorite on F5S, great work! Huge customization possibilities. Donation on the way. :) Missing "do not disturb" icon and mainly better config options for bottom sub-face, so I will be able to exchange sunrise time by climbed floors or activity minutes once this info will be available. :) Using it with steps graph on.

July 18, 2017 | Version 5.91

Very good watch: it is clear and full of information One question: how can you customize it ? I cannot see that. Or is it not possible? Thanks

Developer Reply
July 19, 2017, mbell-SVK

You can use Garmin Connect Mobile app to change the watch face settings: Menu-Garmin Devices-(your connected watch)-Connect IQ Apps-Watch Faces-HandsFive-Settings (and there you have a lot of options to play with). Your watch has to be connected to the phone via BT and your phone has to be connected to the internet.

July 13, 2017 | Version 5.91

does anyone actual now where i install this from i have downloaded it and it sais installed but where do i get it from to make as my screen

July 9, 2017 | Version 5.91

Dobrý den, nejlepší watchface na storu. Jenom mám malý problém - jak nastavim do horního malého ciferniku zase zpět váhu? Chci tam mít baterii včetně arc symbolu a dole váhu uživatele. V současné době se mi na spodnim okraji objevuje cilový počet kroků. Díky za radu

Developer Reply
July 10, 2017, mbell-SVK

Ahoj ;), zobrazenie hmotnosti si vies nastavit cez watch face settings. Najlepsie cez Garmin Connect aplikaciu: Menu-Garmin Devices-(Tvoje pripojene hodinky)-Connect IQ Apps-Watch Faces-HandsFive-Settings. Hodinky musia byt pripojene cez BT k telefonu a telefon musi byt pripojeny na internet.

July 8, 2017 | Version 5.8

Great watch face. I'm using on For runner 235, is there a way to get a second hand?

Developer Reply
July 8, 2017, mbell-SVK

Thanks! On Forerunner 235 you can have seconds hand only in high power mode which is invoked by wrist gesture (it lasts for 10 seconds). You can activate this feature via watch face settings.

July 6, 2017 | Version 5.8

like the face and features but keeps going back to defaults, no other watch face i have does this so dont blame Garmin. i have fenix 5x running latest update etc. still like this as my day to day face

Developer Reply
July 7, 2017, mbell-SVK

Occasional resets of settings to the default values is due to the bug in F5x firmware and most of the custom watch faces are affected. Please, read the Garmin forum to be informed.

Sorry, no statistics available yet.