May 14, 2021 | Version 3.5.3
I can't configure it. When I try to enter coefficients from air drag and rolling resistance it doesn't accept the coma (,). It says the number isn't a valid entry (out of range). If I try to use the point (.) keyboard press isn't registered and I can't enter the point at all
May 14, 2021, xuxumatu
Hi Massimo thanks, that's an old issue that happens with some android version, try to update do the latest Garmin Connect version or install Garmin IQ app or Garmin express and change it there.
Francisco Torres < Tarex >
March 22, 2021 | Version 3.5.1
I have problems with the data field, when I start the activity at the same time I get the Connect IQ logo and it does not show the data at the end of the activity
March 23, 2021, xuxumatu
The app uses 10 FIT data recording fields try not to use it with another app that records fields on same profile, what Garmin are you using?? send me an email please
March 12, 2021 | Version 3.5.1
Top, App zeigt viele verschiedene Werte an. Mir fehlt lediglich eine genaue Dokumentation der verschiedenen Werte und Einstellungen, ist es möglich , die irgendwo zu downloaden?
March 18, 2021, xuxumatu
You can go to the new website
March 3, 2021 | Version 3.4.9
записывает только график, статистику не подводит
March 3, 2021, xuxumatu
Sorry for the inconvenience, on fenix3 this is a garmin issue has not been solved, many developers are hoping garmin fix this in the future.
February 19, 2021 | Version 3.4.8
The app works very well, data are very accurate related a true PM.. If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation! for instance, instead of C Power A, just Power and Avg. Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen?
I'm looking for a mode 2 without colors
January 20, 2021 | Version 3.3.1
The app works very well, data are very accurate related a true PM..
If is possible to display a better data explanation, it'd be a 5 stars and a $$ donation!
for instance, instead of C Power A, just Power and Avg.
Also, I need to see tue current power and the max power, not the average, is it possible without using the other coloured bars screen?
January 20, 2021, xuxumatu
Thanks a lot for the review you have 3 different modes on settings mode 2 shows AVG and MAX and mode 3 shows np and FTP and mode 1 has no color zones send me a email to sent the full pdf documentation.
January 9, 2021 | Version 3.2.6
Great app very similar readings to a power meter
August 20, 2020 | Version 2.6.9
Tengo una pregunta, en garmin conect después de terminar de entrenar cuando tomo vueltas con el garmin en una subida o algo me aparecen campos de potencia de power bike pro vacíos, ¿como puedo hacer para que salgan los datos de potencia de cada vuelta? de resto perfecta
August 20, 2020, xuxumatu
A ver si entiendo: terminas de entrenar y pones stop y salvas entrenamiento y luego reinicias un nuevo entrenamiento y sale vacío? manda un correo a [email protected]
August 11, 2020 | Version 2.5.8
I truly enjoy this datafield, was searching for such fantastic feature!
However, I don't understand how I can select the particular computed value I want to display as datafield. How can I choose to only display "Average Power" ?
To make it more refined, would you consider :
1 - Synchronise the changes / look & feel of all your "PowerBike" datafields?
2 - Make the parameter both definable via presets (such as VéloTopsEndurance) and manual value (using the links you provide, such as Air Drag Coefficient)?
3 - Add Michelin tyres rolling resistance?
4 - Use live ambient temperature from the integrated sensor (avoiding the hassle to manualy define it before each ride)?
5 - Take decimals in account for Bike weight?
6 - Take tires pressures in account?
August 14, 2020, xuxumatu
Thanks a lot for the review an donation 6 michelins are now on settings and decimals on bike weight.
August 1, 2020 | Version 2.5.5
why limit it to 20 kg. This prevent the use with the most of e-bikes. Hope you widen this range.
August 1, 2020, xuxumatu
Thanks, now it´s fixed.
July 30, 2020 | Version 2.5.2
This App worked great a few days ago. However went for a cycle today and the average watt over the cycle was "1"..?
Can this be fixed please..?
Once fixed I will update the review as I believe it works.
July 30, 2020, xuxumatu
the new versión is going to work better with auto pause just turn it on
July 28, 2020 | Version 2.5.1
Just installed and looks fine, but got the same problem as already noted by Marcus, 7.July 2020. The field for 'Rolling Resistance Coefficient' accepts no other value than 0. Garmin Express/Connect are actual and the problem occurs with PC based or mobile app. Other fields like 'Air Drag Coefficient' are ok. Maybe there is no upper range limit set for RRC or the field is handled as integer instead of floating point value!?
July 30, 2020, xuxumatu
Many people reports that bug and fixes with garmin express update, this apps uses coefficients to save memory but if you need a more automatic solution use power bike field or power edge field those are also free.
July 20, 2020 | Version 2.5.0
I have a problem with the data. It shows me always 0. I have modified the coefficients and nothing, the problem still goes.
I have the FR245m with speed and cadence sensor
Please help :(
July 22, 2020, xuxumatu
thanks for witting you need a cadence sensor for this to work if you have de sensor detected but it´s not working i gives you zeros, coefficients it´s garmin express problem, update to the latest versión. or ir you are using on a trainer mode better use power bike field 4, its algo free.
July 19, 2020 | Version 2.4.7
J'ai un capteur de cadence, mais pas de capteur de vitesse.
Ça semble fonctionner.
C'est assez complexe a paramétrer et je n'arrive pas a utiliser "." ou "," pour paramétrer le poids, le coefficient de résistance ou toutes autres données.
July 20, 2020, xuxumatu
Merci pour la revue, l'application peut être utilisée sans capteurs mais perd en précision, et pour saisir les données de coefficient en décimales, vous devez mettre à jour votre garmin express et / ou garmin connect à la dernière version, si vous avez un garmin qui le prend également en charge vous pouvez utiliser Power Bike Field ou Power Edge Field, plus faciles à configurer.
July 13, 2020 | Version 2.3.7
I'm pretty much with a review down there. The values doesn't make sense to me when using it with a Fenix 6, cadence and speed sensor:
Recorded values of AVG power and NP are 2 W and 10 W while Strava the average power is 174 W (Ride with 90 km in 3h, I guess you need to put some Watts for that). Recording is set to 1 s, GPS + Glonass and autostop. Any idea of what could be wrong?
July 13, 2020, xuxumatu
strava watts ara joke the strava algorithm calculates where you are not pedaling, the watts on Power Bike Field are calibrated with garmin vector may be you need to adjust the settings of your weight, height, bike weight and coefficients.
July 7, 2020 | Version 2.3.6
This is the best datafield. Exact what I originally expected from Garmin to provide as I learned that Strava has calculated power displayed.
Instead of GPS using the Speedsensor additionally on my bike seems to fix issues with unrealistic peak values.
I guess ascents are considered by gps signal, wind impacts cannot be considered because no data available at time of recording
How does avg power and np power differ in calculation?
One configuration issue I found. It is not possible to change rolling coefficient value in setting. As soon as I change the Warning pops up that value cannot be bigger 0 and not smaller 0. Even reentering initial value is not possible.
Please fix this and the datafield is perfect for everyone who cannot or dont want to spend lots of money for powermeter
July 8, 2020, xuxumatu
Thanks for the review the algorithm considers air density depending of the altitude and temperature and yes it uses gps and I recommended to change GPS to Glonass or Galileo on 1 second recording for better precision, the decimal input format it’s a garmin express problem update to fix it, np calculations depend of at least 30 min ride above your ftp to be shown
June 20, 2020 | Version 2.2.7
I used your Data Field Toaday for the first time. I need to analyze the figures but summary figures are quite strange.
AVG Power: 21W (versus 210 by Strava)
Max power: 1,957W (versus 1,081 by Strava)
FTP Power: 210W
AVG Power and NP are not relevant (do they include 0?).
I know for sure that I am not able to push 2,000W.
June 20, 2020, xuxumatu
Power Bike Pro uses 20 variables algorithm and Strava has only 16, Strava for example calculates power when you are not pedaling, for better results we recommend you yo use cadence and speed sensor, GPS on 1 Sec, on galileo or glonass, calibrate the altimeter and enable auto pause thanks for the review
June 19, 2020 | Version 2.2.7
La aplicacion funciona aparentemente bastante bien, pero NO permite modificar el "coeficiente de resistencia a la rodadura", que por defecto indica 0,0045. Si se intenta modificar, indica que el Valor debe estar comprendido entre 0 y 0 (Pienso que se trata de un error que deberia solventarse). Dicho error, tambien provoca que el resto de valores (Como peso de la bici, temperatura, FTP, etc.) no puedan modificarse si dicho coeficiente no se deja a 0. En mi caso, lo quiero usar en Bicicleta de Montaña, y seria interesante poder modificar dicho parametro, y por supuesto tambien el resto de valores. Por lo demas, la aplicacion parece genial. El Dispositivo usado es un Edge 530.
June 19, 2020, xuxumatu
Gracias por el review, el problema de la modificación de los decimales no es un problema de la app es un problema de garmin express, intenta descargar la versión mas actual de garmin express o modificarlo con el la app de el movil.
June 15, 2020 | Version 2.2.5
На станке Tacx flux smart 2 показания совпали с точностью несколько процентов.
June 16, 2020, xuxumatu
thanks a lot for the review you for better precision on trainer use power edge field on trainer mode
June 8, 2020 | Version 2.2.1
Funciona muy bien: sólo necesitas un sensor de cadencia de pedaleo, gps y barómetro en el reloj. Muy útil y perfecto funcionamiento.
June 8, 2020, xuxumatu
May 24, 2020 | Version 2.1.0
Hi, i really like the app. I was able to use it with my garmin 245 music to show the power coming from giant power meter pro. How can i see the normalized power after the race? I see avg power, ftp power, and ftp time. Also how is the ftp calculated?
Thanks a lot for you help.
May 25, 2020, xuxumatu
Hi thanks for the review the ftp is the amount of watts and time you do on Z4 (.75% of your ftp) or higher the power you see on this app it´s not coming for the power meter, it´s estimated power based on algorithm, if you want to see the power of 245 you need this app.
May 20, 2020 | Version 2.0.5
Did not work for my Edge 520 plus.
It just showed the IQ logo the entire ride. I did not tried anything additional as I tested next to a similar datafield app that actually worked. This one is uninstalled from my device now.
May 21, 2020, xuxumatu
sorry to hear that, just have to restarit thanks for the review
May 2, 2020 | Version 2.0.3
Really do like the data field and the displayed power values make a lot of sense ! Math behind this data field is impressive ! Thank you ! Areas for improvement: Unfortunately my summary fields are all 0 Watts in the final summary. I also would appreciate if the font of the data field is better adjusted to the available screen space ! Power is important so I would like to see cPower and aPower on a full screen data field on my Forerunner 945 --- instead I get small text with the values ... would appreciate if the data field adjusts the font sizing.
May 2, 2020, xuxumatu
Thanks a lot for the review, you can also try power edge field for a full screen datafield it´s also free and it´s on my store
April 14, 2020 | Version 2.0.3
I've left a review before so I'd like to submit another one because I had issues with this app. I've concluded that the issue was with the Garmin Connect IQ, after the latest update Connect IQ, Power bike pro stopped working and nothing could fix it. I tried many things, but the latest I did was to downgrade Connect IQ and the versions that work are 1.2.1, 1.2.2.., 2.0.0...Now Power bike pro works great again for me. The app is very accurate, compared it with Garmin Vector 3 and the data they gave was very similar. Thanks for this wonderful app.
April 14, 2020, xuxumatu
thanks very much for the review!!!!! i have another app Power Edge Field that has more automatic settings if you want to try have a nice day.
April 9, 2020 | Version 2.0.0
The data field was perfect, but since the last update to my Edge 530 the data field only show an IQ error.
April 9, 2020, xuxumatu
Thanks, sorry for the inconvenient now its fixed