November 5, 2020 | Version 1.9.5
Very helpful,very nice,works perfect in my fenix 6.I don't know if customization can be from the watch and not from the phone, just saying.
May 26, 2019 | Version 1.8.6
Perfect now !!!
Thanks a lot for your good work !!!
May 25, 2019 | Version 1.8.5
Same issue, can not change the time in any field. Forerunner 245
May 26, 2019, Splus
Do not use the review to report issues. We cannot exchange technical information through this channel. There is a button which permits to contact the developer. But do first have a try with the latest version.
May 24, 2019 | Version 1.8.4
How can I change intervals time? I am using Forerunner 735xt and while I changed intervals in Connect application, at my watches it still shows 56min workout?
May 24, 2019, Splus
This was an issue of the 1.8.2. Should be fixed now.
May 23, 2019 | Version 1.8.2
In my Forerunner 245M it is impossible to change the seconds in all the fields. I know how to do it because in my Vivoactive HR I can do it without problems.
May 23, 2019, Splus
I see that there is a problem on vivoactive 3 also. Let fix this in a next release.
May 8, 2019 | Version 1.7.4
Can you update the field for the Forerunner 245?
I use it with my Vivoactive HR and it is a really good field.
May 9, 2019, Splus
This device is too old for this application. This is not possible.
April 22, 2019 | Version 1.7.4
I couldn’t make sense of how to set intervals, and It registered my HIIT as treadmill running altogether...
April 24, 2019, Splus
It of of the 3 configurations: RUNNING, CYCLE or OTHER. You need to have a try.
March 21, 2019 | Version 1.7.3
Ich habe mir HiiT heruntergeladen, aber ich finde es nirgends auf meiner Uhr wo ich es starten kann.
vielleicht können sie mir weiterhelfen?
March 21, 2019, Splus
You need to customize the viewed fields of a sport activity on the watch.
Select then the field "HIIT field" from th ConnectIQ category.
February 22, 2019 | Version 1.6.7
I think it's an excellent app, the only drawback is that the acoustic sound does not work nor the vibration in the garmin 920 , and i have it activated inside the configuration, I would know what os The problem
? however it is a app that I use in every hiit output with the bike
February 23, 2019, Splus
The Forerunner 920XT is not supported by the actual SDK version. The Garmin store should not make it available for your device. It is strange that this is the case.
September 5, 2018 | Version 1.6.2
Once I read through the comments and learned how to apply a field properly (this is not an app ala FitnessTimer or the like; you add this to an existing activity, like Strength or Interval), this really hit it's stride. The pre-shift "announcement" is an excellent feature, as I sometimes like to cheat out of a rest cycle in the base to gain an extra rep or 2 on my next work cycle. I use the main cycle warmup and pause between basic cycles to do a minute of cardio before each base, so I need to add 10 seconds to those values to allow me time to switch into and out of the base reps. It'd be nice to have a little more flexibility to add a rest step prior to jumping into each base, but otherwise I cannot complain. Thanks for this!
September 6, 2018, Splus
Actually, I'm only maintaining this application. There will be no new feature but I correct bugs and I add the support for new devices. Also, I don't want to make the configuration more flexible because it will make the configuration more complex.
But, if you need more time to switch from one specific activity to an other, I would simply use the pause button. During the pause, the timer is also stopped and will be resumed after the pause.
April 2, 2018 | Version 1.5.0
In my personal trainings I have just a little problem, it is the colour and font.
I use to make my trainings inside home and with not too much light, so the colours that you choose are too dark for me, also you change from white to black font during the same training.
For the rest, just perfect, I can program the works with all the details that I need.
April 2, 2018, Splus
Normally the back light should be switch on automatically before each transition. So you should not have some problems to read the display.
March 29, 2018 | Version 1.1.0
Wenn man einmal verstanden hat wie Data Fields arbeiten, ist es eigentlich ganz einfach. Ansonsten super Sache, freue mich schon auf das erste HiiT-Training.
March 28, 2018 | Version 1.1.0
After several attempts it does not install on my vivoactive hr with sw version 4.30.
March 29, 2018, Splus
The problem is certainly due to the fact that setting up a data field is not intuitive.
You need to install it through the garmin connect store. And then add the field into your activity on your watch. Here a good tutorial: https://tribeccato.wordpress.com/2017/01/11/adding-data-fields-from-garmin-connect-iq/