August 13, 2021 | Version 4.1.0
Those oxygen reading for surrounding oxygen or for body oxygen
May 26, 2021 | Version 4.1.0
Does it measure active body oxygen levels like an oximeter?
Albino Binoe Azurin
October 24, 2020 | Version 4.1.0
How do i change the unit from Fahrenheit to Centigrade?
January 15, 2021, mr3ska
Widget use system settings from the watches (depends on watch model).
August 4, 2020 | Version 4.1.0
Do I have to recalibrate every time I open it? I’m on a vivoactive 3.
August 5, 2020, mr3ska
Widget works with elevation measured by the device sensor. It hasn't any own data source. It takes the data from the device system and these values are used for oxygen percentage calculation. There is no way to change the values measured by sensor through the Connect IQ widget.
HeMax 𓅂 ☀︎︎ ⚔︎
June 21, 2020 | Version 4.1.0
Thanks for the reply to my pre Que.
The bottom line shows "connect tempe"
Why isn't it showing temperature there?
June 23, 2020, mr3ska
Hello, fenix3hr supports low version of SDK and it does not support to use internal temperature by Connect IQ apps/widgets. Because of it, it is possible to set the baro data from internal barometer or external Tempe sensor
June 17, 2020 | Version 4.1.0
Hi Sir, thanks for the wonderful app. However the figure now is minus meter but actual is around 17m. Would you please help how to reset or could adjust by manually, thank a for your kindly help.
June 18, 2020, mr3ska
Hi, this widget only loads a data from device system. it hasn't any own sensor or data source. It asks the system for elevation data and after that, it displays the data returned by device system. I think you will need to calibrate altimeter of your device.
June 5, 2020 | Version 4.1.0
units does not match settings. only show feet and F degrees, no meter and C degrees.
June 7, 2020, mr3ska
You must set all units in Device settings to metric. After that, widget will show meters and Celsius degrees
May 16, 2020 | Version 4.1.0
I have it on my Fenix 3, and I liked it so much! Now I have a Garmin Venu, can you please port it to this watch to - thanks a lot!
May 13, 2020 | Version 4.1.0
Hello, can you show besides calculated oxygen level as well the measured one from garmin 945?
May 17, 2020, mr3ska
I am sorry but Oxygen levels from watches itself is not possible to display, because there is no access to this information through Connect IQ platform.
March 26, 2020 | Version 4.1.0
Μετράει τα επίπεδα οξυγόνου στον αέρα; Ή είναι ένα παλμικό οξύμετρο για τον άνθρωπο;
February 16, 2020 | Version 4.1.0
Saludos, como cambio las unidades a metros y C°?. Muchas gracias, me parece muy interesante la app.
March 8, 2020, mr3ska
metric units and Celsius degrees are available when your device has all units set to metric (distance, elevation, depth, weight...)
December 25, 2019 | Version 4.1.0
Excellent ! Indique l'oxygène disponible dans l'air selon l'altitude du moment, c'est un outil utile pour celui qui fait de la montagne, ça sert de rappel et d'indicateur.
March 8, 2020, mr3ska
Thank you for your review and I am happy it is usefull for you.
David FT 🇲🇽
November 2, 2019 | Version 4.0.0
I really loved this widget but unfortunately I updated my Fenix 5 to last firmware and it stoped working , I have uninstalled it and re installed but now it just shows the IQ! Error icon
December 12, 2019, mr3ska
I tested it on fenix 5 and fenix 6 devices and it works OK. How did you install it into the watch? Through PC (Garmin Express) or through phone (Connect, Connect IQ) ?
October 22, 2019 | Version 4.0.0
I like the idea of the widget glance but it doesn’t seem to be showing up on my Fenix 6. Just shows ‘OxygenWidget’. Any ideas?
October 23, 2019, mr3ska
Hello Sven, thank you for your review. The nonPRO devices from fenix6 series have less memory than the PRO versions and thanks to it, they are working with widget glance mode differently. Thanks to it I am not able to change the way how it will be loaded/displayed on the device. I tested it on f6S nonPRO and the device loads the Glance mode view, but at first time it takes few seconds
September 26, 2019 | Version 4.0.0
Solid. Love it.
September 29, 2019, mr3ska
Thank you for your review. I am happy that widget is useful for you.
September 25, 2019 | Version 4.0.0
September 29, 2019, mr3ska
Thank you so much for your review.
April 27, 2019 | Version 3.5.0
How do I get the widget to show meters and Celsius?
April 28, 2019, mr3ska
it is needed to set your device units all to metric units. It depends on your device, bud for example fenix3 has it in Menu - Settings - System - Units.
July 31, 2017 | Version 3.10-upd
April 30, 2017 | Version 3.10
It would be good have a statistic about de oxygen in the diferents moments during the day, weeks and months.
January 7, 2017 | Version 3.00-upd2
October 13, 2016 | Version 3.00-upd1
Buen widget yo añadiría la opción de temperatura interna que tiene el Fénix 3 HR
October 25, 2016, mr3ska
I am sorry but it is not possible to use internal temperature sensor for showing its data in connect IQ apps.
September 9, 2016 | Version 3.00-upd1
i want to use the temp sensor from fenix 3 and not a seperat one! i dont use the watch on my body all the time. sometimes on my backpack, still the same like a seperat temp sensor
October 26, 2016, mr3ska
Hello, I am sorry but it is not possible to use internal temperature sensor for showing its data in connect IQ apps. Kind Regards Tomas
July 15, 2016 | Version 3.00-upd
great it work on my fennix 3
April 27, 2016 | Version 3.00
The percentage of oxygen in the air does not change with altitude, but remains constant. What does change is the atmospheric pressure, which in turn affects the partial pressure of oxygen in the air. In other words, there is less pressure available to drive oxygen into the bloodstream, which is why breathlessness occurs at altitude. The readout should therefore be changed to show percentage partial pressure of oxygen.
April 12, 2016 | Version 3.00
like........very useful,thank u for ur app