April 12, 2021 | Version 0.6
Great field! I had despaired of being able to record power on my Vivoactive HR until I discovered it. It works great on the ride albeit with a bit of a lag, possibly due to some smoothing I'm not aware of, which would be a pity because my PM automatically applies a 3 second smoothing to its output. Unfortunately, the data doesn't make it to Strava although everything else does. I know some people do see it on Strava and some don't. It's apparently a hit and miss affair, which is the only reason I deducted one star.
April 11, 2021 | Version 0.6
Vector 3 disconnects in ANT+ mode
March 28, 2021 | Version 0.6
The app does what it says. Works perfectly on my Forerunner 245. You can later get the average, normalized and max power in TrainingPeaks (free account). The only downside is that I cannot find a way to get the data to Strava but that's not the app's fault.
February 24, 2021 | Version 0.6
Very useful data fields that work smoothly and simply. He has a 2nd data field too so you could have one power meter DF in bike mode on your FR235 and then a different power meter DF on your indoor bike trainer (not FE-C) in indoor bike mode.
I used them for the Vasa swim trainer on a more advanced garmin watch that didn't allow a power meter in swimmode...simple ...add this data field instead !
February 23, 2021 | Version 0.6
Works great with FR 250 Music!
February 21, 2021 | Version 0.6
Thank you! First time I tried to use I couldn't get it to connect to my 4iiii power meter. Just tried again today and everything worked perfectly. Power and cadence detected straight away during ride and automatically added to Strava and Garmin connect. Just what I was after.
January 12, 2021 | Version 0.6
Thank you very much! App works very good. The only issue I have encountered is the power data is not uploading to Training peaks. Is there any way to get the file to transfer over? Thanks!
December 20, 2020 | Version 0.6
You Sir are truly awesome :)
Works great and i never had a problem.
November 1, 2020 | Version 0.6
This datafield is great! Congratulation, you have great coding skills! It works flawlessly with my vivoactive 4 and Favero Assioma pedals.
The only thing missing, in my opinion, for it to be perfect is the AVG and MAX power.
I saw on another datafield (powerbikefield 4) that it is possible to add extra IQ calculations that appears in the stats in Garmin Connect. Maybe it would also be possible to add it to this datafield?
Anyway, thanks for this amazing work!
October 26, 2020 | Version 0.6
Great app if you have a device that doesn’t support native power (like a lower Forerunner series watch). Does the best with what Garmin allows it to access. I wish they’d recognize the ConnectIQ data as actually important and do some analysis of it in Connect but at the very least I can now see my power while I ride on my watch.
September 21, 2020 | Version 0.6
This is great. Thank you for this.
I have it linked between the Watt Bike at the gym and my Garmin 245.
I am able to add the Watt Bike as a Speed and Cadence Sensor.
This now allows me to see a plot of my power post workout.
The only left that I cannot figure out is how to determine my average power (easily).
September 13, 2020 | Version 0.6
Excellent as a way to get real-time power from my 4iiii crank arm PM to my VA4 while riding. Thank you for creating this - as others have said it would have been a shame to have spent so much $$$ on ANT+ compatible hardware that could not communicate and this fills in a critical gap for many. This will save me dropping more money on an Edge head unit for a while. Graph overlays in Garmin are excellent too. Is there any way to extract the raw power data as a table? Garmin connect shows instantaneous power only, but being able to drag and average over a segment (like the native fields allow) would be helpful. Even being able to do this in Excel would would be great.
August 7, 2020 | Version 0.6
I am using on my Garmin Venu with Favero Assiamo pedals. Thank you so much for making this. I was so pissed that I couldn't connect my $500+ pedals to my $300+ watch when they both pretend to support ant+ and BT. Power and cadence can be plotted in Garmin connect over heart rate exactly how Garmin should have it from the factory.
July 14, 2020 | Version 0.6
This is fantastic, works great with garmin forerunner 245m and 4iiii power meter (podium rechargeable).
I also had it linked to Zwift at the same time.
July 9, 2020 | Version 0.6
Thanks for this app! It was just what I was looking for. I was considering getting another watch which is considerably more$$ just to get pwr meter data recorded. The graph is consistent with my lezyne head unit. App is on vivoactine 3.
July 7, 2020 | Version 0.6
This worked one time wonderfully and now anytime I go to use it, it just says “Power(scan) paused. Can someone help? This is for a vivioactive4
July 7, 2020, takura87
Dear Jacob, what you observe is intended correct behavior of the current version as the app behavior was changed to limit battery consumption on some devices. It's explained in the app descriptions which I have now edited to make this more noticeable. You can manually restart search or change the app settings to deactivate pausing. Hope this gets you further, please message me if you are still stuck. I don't know what you experienced with other developers, but my view is that contacting the developer is the most reliable way to have questions answered and solve issues. Cheers!
Felipe Gálvez Magallón
June 8, 2020 | Version 0.4
It no longer shows the cadence since I updated it at the end of april.
June 11, 2020, takura87
Thanks for the second review. I believe you are using a FR230: On devices with a small memory, I had to decide between leaving cadence in or adding reliability improvements and decided in favor of the latter, as reliability issues are where I get the most feedback. I can understand that the elimination of a previous feature is frustrating. Message me and we might find a way to revert your version back to the older one if that is your preference. (If I happen to find plenty of time I could try fitting both into small memory devices but I can't promise that's doable.)
June 5, 2020 | Version 0.4
works perfectly, thanks a lot!
June 5, 2020 | Version 0.4
Great for multiple power meter owners!
May 25, 2020 | Version 0.3
Great app, you should promote this app in Garmin Forums, there is a thousands of users trying to run powermeters with no device support.
May 13, 2020 | Version 0.2b
This is fantastic tool for my Vivoactive HR and finally a bit of analytics of Power in Garmin Connect. HOWEVER, Would it be possible to add "average power" or any average field that this application collects? It could be even additional field that calculate average power. That would be fantastic, thank you! :)
Felipe Gálvez Magallón
May 5, 2020 | Version 0.1
it works on my forerunner 230.
The data doesnt displays on garmin connect but if I export the file to golden cheetah now you can see the power and cadence data.
Then in golden cheetah you can export the file and import it back to connect and now you can see the power data on garmin connect.
Other thing that you can do is pass the FIT files from your device to cheetah directly and then to g connect if you want to see the data on garmin.
April 18, 2020 | Version 0.0.6
finally a way to get power to the edge explore (and the only one to my knowledge, too) Thank you!