App Icon

CleanAnalogPlus

Description

FULL FEATURES, NO FEES!</p><p></p><p>IMPORTANT: There is an issue with updating settings from the Android version of Garmin Connect. Android users, please use Garmin Express on a PC to update settings.</p><p></p><p>A simple, clean, fully configurable analogue watch face with continuous second hand for supported watches, 12 preset samples, battery saver option. If you have an issue that you believe relates to the watch app please contact me at [email protected] first before posting a review. If you wish to share your watch face selection post them to the CleanAnalog Facebook page https://www.facebook.com/cleananalog/. If you like this watch you can leave a donation via PayPal at www.paypal.me/simonjohnedwards, contact via [email protected], how to change the settings on your phone can be found here https://vimeo.com/241946368 (Garmin Connect) and https://vimeo.com/250027125 (Garmin Express), and many questions are answered here http://simonjohnedwards.com.</p>

What’s New

9.3.3/9.3.4 - update to support SDK 2.4.9</p><p>9.3.2 - update for Fenix 5 Plus series, and using SDK 2.4.7</p><p>9.3.0 - using SDK 2.4.5, added Italian and Spanish to setting thanks to Arianna and Manuel, increased move bar thickness by 1 pixel, change centre Arbor so that turning off the second hand does not turn off the centre arbor, second hand turned off by thickness setting only and not via second hand colour setting</p>

Additional Information

Permissions

This app requires access to:

  • Run in the background when it is not active (potentially affecting battery life)
  • GPS location
  • Sensor data (i.e., ANT+, heart rate, compass)
  • Heart rate, barometer, temperature, and altitude history
  • Your Garmin Connect™ fitness profile
  • Approach® S60 Approach® S60
  • D2™ Charlie D2™ Charlie
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
Average Rating: (83 Ratings)

JNowak21
July 15, 2019 | Version 9.3.4

Constant bugs, whenever i go to change any settings it refreshes my watch face to a stock garmin face and if I go to a menu and back to home watch face on my watch it is right back at defaults. even the settings in the app go to default. I have a Fenix 5 plus

Steven Miller
July 12, 2019 | Version 9.3.4

The settings no longer update on vivoactive 3 music

Developer Reply
July 13, 2019, sedwards

Hi Steve, can you try change the watch face to a different watch face, then change the settings then go back to the watch face. If you still have an issue email me at [email protected], regards Simon

chrischicbx
July 3, 2019 | Version 9.3.4

Hallo. Wichtig beim ändern der Einstellungen über die app ist das die Uhr nicht aktiviert ist. Bei mir hat das jetzt gut funktioniert. Also erst eine andere Uhr aktivieren dann Einstellungen ändern

Developer Reply
July 9, 2019, sedwards

"It is important when changing the settings via the app that the clock is not activated. It worked well for me now. So first activate another clock then change settings."

Miroslav Kyosov
June 24, 2019 | Version 9.3.4

Can it have the weather temperature instead of inside (not quite sure what it represents)? Also, there is a bug, the watch face resets on its own once in a while for no reason. Rest functions are ok.

Developer Reply
June 24, 2019, sedwards

To have the weather temperature would require the watch to be continuously tethered to the phone. One of my design philosophies is that all the watch functions can work when away from the phone. The temperature currently represents the temperature from the temperature sensor in the watch.

Fab
June 2, 2019 | Version 9.3.4

There is a bug when i want to display the temperature in bottom field... The watch loose all the settings and display different caracters meaning nothing Vivoactive 3

Алексей
May 10, 2019 | Version 9.3.4

GVA3, не сохраняет настройки, при любом изменении устанавливается стандартный циферблат, после открытия настроек или запуска циферблата, всё по старому (

Alberto
May 5, 2019 | Version 9.3.4

El amarillo podía ser más amarillo no ese tan feo, un amarillo más bonito

Niko
April 10, 2019 | Version 9.3.4

Einstellungen werden nicht übernommen.

Diana
April 3, 2019 | Version 9.3.4

Übernimmt meine Änderungen nicht.

DK
March 30, 2019 | Version 9.3.4

Nicht schlecht, aber sehr umständlich, dass ich die Smatwatch an den PC anschließen muss um Einstellungen vorzunehmen. Und eine Vorschau von den Einstellungen wäre sehr gut.

Michael
March 27, 2019 | Version 9.3.4

Great watchface. It fits a lot of information very neatly in the small space available and allows for a lot of customization. I am currently having an issue on my vivoactive 3 though where this watchface drains the battery twice as fast as some others.

Developer Reply
March 28, 2019, sedwards

VA3 do have issues with battery life, however they are very good watches and are light, so there is trade off for battery life against the watch style. All that said, CleanAnalogPlus has a feature to turn off real-time functions like the second hand during the sleep time setting on the phone app, as long as this function is turned on for the watch face via the app and sleep time is also setup in Garmin Connect app.

Jeffrey S. Antonio
March 20, 2019 | Version 9.3.4

Each time I try to customize the watch face, it gets garbled displaying non sense and then it says it can’t communicate with my Connect IQ. Was fine before. And yes, I did uninstall-install several times.

Developer Reply
March 28, 2019, sedwards

This is the first time I have been informed of this behaviour and I have never seen it before. I have investigated this but cannot reproduce it or see what would cause this.

Justin
February 26, 2019 | Version 9.3.4

After some experimentation I think I have finally cracked it. Is there a way to save a customised face ? I have a very simple design in black numerals on a white background but sometimes I'd like to change it to the reverse I would like to jump back-and-forth between my dark and light views .

Developer Reply
February 26, 2019, sedwards

Hi Justin, unfortunately there is no way to store your own customised designs. It is technically possible however I have run out of allowable software space.

Michael
January 24, 2019 | Version 9.3.4

Does the second hand actually always stay in?

Developer Reply
January 24, 2019, sedwards

Yes the second hand should always be on. Can you email me at [email protected] with the type of Garmin watch that you have.

Igelchen 🦔
January 6, 2019 | Version 9.3.4

This is the best analog clock surface for Garmin. Very diverse and user-friendly. Should be displayed at the front. Thank you. It would be nice to be able to turn off the display of digits (3, 6, 9 and 12) as well as the date, but minutes remain faded in.

Developer Reply
January 17, 2019, sedwards

You can turn off the digits or change their colour to the background colour. You can also turn off the date field. In fact all elements can be turned off if you scroll to the bottom of each colour setting.

Johan Chandra
December 2, 2018 | Version 9.3.4

Very good and very customizeable watch faces. Only 1 feature that i think its important for me and i cant find any setting, there is no vibration notification for move alert, only radial move bar. Overall its good

Developer Reply
January 24, 2019, sedwards

Hi Johan, thank you for the feedback, I don't think I can access vibration features via the Garmin developers kit. I will take a look and see what is possible.

Johann Dietrich
November 15, 2018 | Version 9.3.4

Wäre sehr gut, verstellt sich leider dauernd.

Developer Reply
January 24, 2019, sedwards

Verwenden Sie ein Android-Telefon, um Anpassungen vorzunehmen? Es ist ein bekanntes Problem beim Ändern der Einstellung mit einem Android-Telefon aufgetreten. Bitte senden Sie mir eine E-Mail an [email protected]

Wouthy
November 10, 2018 | Version 9.3.4

Best there is! Almost everything is configurable. Great work. One small request: can you make an option to show only the week number?

Lars Jensen
November 4, 2018 | Version 9.3.4

Nice watchface. Gave it 5* but would have given 6 if it supported external temperature (Tempe).

Developer Reply
November 24, 2018, sedwards

Hi Lars, I did have a look at this and have found the external Tempe device really unreliable. I'll.take another look.

Jaroslav Sulitka
October 18, 2018 | Version 9.3.4

Otherwise great watchface is ruined by resets after Garmin Connect syncs. I know I should update it with Garmin Express, but I use USB cable once a week just for recharge and I'm not changing that... Uninstall, I'll try later again.

Brandon Carmichael
October 13, 2018 | Version 9.3.4

This is an excellent watch face. Great work. If I could make one small request or suggestion, the switch to night colors is a great idea; however, if the hour and minute hands were a little bit darker, the watch face would be more legible. Very good design all the same.

Developer Reply
November 24, 2018, sedwards

HI Brandon, the night mode currently only swaps pure black and white around. All the other colours are unaffected. I did think of calculating a threshold mid intensity and switching all.colours around this some how but it is difficult with a limited colour palette. So at the moment you would need to select a hand colour that works well when the black and white switch over.

Miha
September 18, 2018 | Version 9.3.4

It's OK, but resets all the time. Sure....it is the software problem.....and the issue appears ONLY on this watchface. FYI

Developer Reply
September 27, 2018, sedwards

Can you email me at [email protected] There is an issue with resetting when using Garmin Connect on Android phones.

s.frisch
September 1, 2018 | Version 9.3.4

By far the best watchface I found so far. Almost everything is configurable. Very good work! It would be nice to have sample screenshots of the 12 preset samples!

Stefanos
August 27, 2018 | Version 9.3.4

Nice one. It has an annoying bug where it loses the settings sometimes when you try to save them, but otherwise it's very nice.

Developer Reply
September 1, 2018, sedwards

Hi there. I am aware of this bug and it seems to be isolated to the Android phone version of Garmin Connect. I would be interested to hear from others with this bug.

Ilya
August 15, 2018 | Version 9.3.2

Outstanding! I just tried 10 others, this one is the best! Not only has it a second hand, digital time, HR, but finally a working temperature from the sensor! Must have! Vivoactive 3.

Developer Reply
September 1, 2018, sedwards

Thanks for the positive feedback. I have tried to get as many features as I can into what is a very small amount of memory space that Garmin allow for watch apps. The temperature I have found really useful to measure the temperature in the house or a hotel overnight and make adjustments to the heating :-)

Sorry, no statistics available yet.